A commercial griddle is one of the most versatile pieces of cooking equipment in a restaurant kitchen. From pancakes, eggs, and breakfast sandwiches to smash burgers, cheesesteaks, quesadillas, grilled vegetables, and Indian street food, a flat-top griddle can handle a wide variety of menu items.
When shopping for a commercial griddle, restaurant owners will commonly encounter two different control configurations: manual controls and thermostatic controls. Although these griddles may look nearly identical from the outside, they regulate heat differently, which can affect cooking consistency, employee training, operating costs, and overall kitchen performance.
So, what is the difference between a manual and thermostatic commercial griddle? A manual griddle allows the operator to directly adjust the burner output, while a thermostatic griddle automatically regulates heat around a selected temperature setting. Manual griddles generally offer simpler controls and lower initial purchase costs, while thermostatic griddles provide more repeatable temperature management.
Both configurations can be effective in professional kitchens. The better choice depends on what you cook, how much food you produce, your staff's experience, and your equipment budget.
In this guide, we will explain how manual and thermostatic commercial griddles work, compare their advantages and disadvantages, and help you determine which type is best for your restaurant.
What Is a Manual Commercial Griddle?
A manual commercial griddle is a flat-top cooking appliance that allows the operator to directly adjust the amount of heat supplied to the cooking surface.
On a typical manual gas griddle, each control knob operates a gas valve connected to a burner or heating zone. Turning the control increases or decreases the burner output.
However, the knob does not automatically maintain a specific cooking surface temperature.
For example, turning a manual griddle knob to its middle position does not necessarily mean the cooking surface will stabilize at 350°F. The actual surface temperature depends on the burner output, plate thickness, cooking activity, surrounding conditions, and how long the griddle has been operating.
The cook must monitor the cooking surface and make adjustments throughout service.
Examples of manual commercial griddles available at Nishi Enterprise include:
- Atosa ATMG-24 24-Inch Manual Control Flat Griddle
- Dukers DCGM24 24-Inch Manual Gas Griddle
- Toastmaster TMGM24 24-Inch Manual Countertop Griddle
Manual griddles are particularly attractive to restaurants that want straightforward equipment at a competitive initial purchase price.
What Is a Thermostatic Commercial Griddle?
A thermostatic commercial griddle is a flat-top cooking appliance equipped with temperature-sensing controls that automatically regulate the heat supplied to its cooking surface.
Instead of manually selecting a burner intensity, the operator selects a desired cooking temperature using a temperature-marked control knob or digital controller.
For example, if a cook sets a thermostatic griddle to 350°F, the control system responds to changes in temperature and adjusts the heat supply to maintain conditions around that setting.
Depending on the equipment design, the thermostat may increase, decrease, activate, or deactivate the heat source as needed.
This does not mean that every point on the cooking surface remains exactly at 350°F at all times. Temperature variations can still occur because of equipment design, food loading, thermostat accuracy, sensor placement, and heat transfer across the plate.
Nevertheless, automatic temperature regulation can make cooking more consistent and reduce the amount of manual adjustment required from employees.
Examples of thermostatic commercial griddles include:
- Atosa ATTG-24 24-Inch Thermostatic Griddle
- Dukers DCGT48 48-Inch Thermostatic Gas Griddle
- Toastmaster TMGT36 36-Inch Thermostatic Gas Griddle
- American Range ARSTG-36 Thermostatic Gas Griddle
Manual vs. Thermostatic Commercial Griddles: Key Differences
The main difference between manual and thermostatic griddles is whether the equipment automatically responds to changes in cooking temperature.
| Feature | Manual Griddle | Thermostatic Griddle |
|---|---|---|
| Control method | Direct burner or heat-output adjustment | Temperature-based automatic heat regulation |
| Temperature settings | Usually flame intensity or relative heat settings | Typically selectable temperature settings |
| Temperature consistency | Depends heavily on operator adjustments | Generally more repeatable within the control system's capabilities |
| Employee training | Requires familiarity with equipment behavior | Can simplify standardized cooking procedures |
| Initial purchase cost | Generally lower for comparable equipment | Generally higher for comparable equipment |
| Control system complexity | Typically simpler | Includes temperature-sensing components |
| Performance during heavy loads | Depends on burner capacity, plate construction, and operator adjustment | Depends on burner capacity, plate construction, and thermostat response |
| Energy consumption | Strongly influenced by operator settings and habits | Automatically regulates heat according to temperature demand |
| Common applications | Flexible cooking and experienced grill operators | Standardized recipes and repeatable batch cooking |
Neither control configuration is automatically superior in every category. A heavy-duty manual griddle may outperform a lighter-duty thermostatic griddle in certain high-volume applications, while a well-designed thermostatic model may offer greater consistency and faster automatic response to changing cooking conditions.
How Does a Manual Gas Griddle Work?
Most commercial manual gas griddles consist of a steel cooking plate positioned above a series of gas burners.
When the burners operate, heat transfers to the underside of the cooking plate and spreads through the metal.
The operator adjusts the burner control knobs to increase or decrease the amount of gas supplied to the burners within the equipment's designed operating range.
A manual griddle operates using an open-loop control arrangement. In simple terms, the operator selects a heating level, but the equipment does not automatically adjust that level in response to changes in cooking surface temperature.
Consider the following example.
A cook preheats a manual griddle and begins preparing burgers. As several refrigerated burger patties are placed on the cooking surface, they absorb heat from the plate, causing its temperature to drop.
The burner continues operating at the setting selected by the cook. Depending on the griddle's construction and cooking load, the operator may need to increase the heat to support recovery.
When the food is removed, the plate may begin heating again. If the burner remains at a high setting during a quiet period, the cooking surface may become hotter than intended.
Experienced cooks learn how their griddles respond to different settings, food loads, and cooking schedules.
This direct control can be useful in kitchens where cooking techniques and heat requirements change frequently throughout service.
How Does a Thermostatic Griddle Work?
A thermostatic griddle uses a temperature sensor and control mechanism to regulate heat according to the selected temperature.
This is commonly described as a closed-loop control system because temperature information is used to adjust the heating process.
The general operating process is as follows:
- The operator selects a desired temperature.
- The heating system warms the cooking plate.
- A temperature sensor monitors conditions at its designated sensing location.
- The thermostat reduces or interrupts heating when its control conditions are satisfied.
- When the sensed temperature drops, the control system increases or restarts heating as required.
Not all thermostatic griddles accomplish this using the same technology.
Some use mechanical thermostatic valves that regulate gas burners. Others use electronic sensors and controllers that manage gas or electrical heating systems.
More advanced control systems may respond more quickly and accurately to changes in temperature than basic mechanical arrangements.
For example, the Vulcan 924RX 24-Inch Gas Griddle belongs to a product series that uses embedded snap-action thermostatic controls.
These equipment differences are important when comparing models because the word thermostatic alone does not establish how accurately or quickly a griddle regulates temperature.
What Are the Different Types of Commercial Griddle Temperature Controls?
Thermostatic griddles are available with different control technologies, ranging from relatively basic mechanical systems to advanced electronic temperature regulation.
1. Manual Burner Controls
Manual controls provide direct adjustment of burner intensity without automatically maintaining a selected cooking temperature.
They are straightforward to operate but require employees to understand how burner settings influence actual surface temperatures.
The Dukers DCGM24 Manual Gas Griddle, for example, features independent manual controls for its two burner zones.
2. Modulating Thermostatic Controls
A modulating thermostat adjusts burner output in response to temperature changes.
Rather than relying exclusively on full-power heating followed by an off period, a modulating system can vary the heat supplied according to its control design.
Performance depends on the particular system. Some basic modulating controls may respond more slowly to substantial temperature reductions caused by heavy food loading.
3. Snap-Action Thermostatic Controls
Snap-action thermostats typically switch the heat source between defined operating states as the temperature moves through the control system's operating range.
When additional heat is required, the heating system activates according to the thermostat's design. Once the temperature reaches the corresponding control threshold, the heat source is reduced or switched off.
Some manufacturers position thermostat sensing components within the cooking plate to improve temperature response.
Examples include certain models in Vulcan's commercial griddle product lines.
4. Solid-State Electronic Controls
Some higher-end commercial griddles use electronic temperature sensors and solid-state controls.
These systems can provide tighter temperature regulation and more responsive heat management, depending on the equipment's sensing technology and heating system.
Restaurants producing large quantities of standardized menu items may benefit from more advanced controls when repeatability and production speed are particularly important.
However, electronic controls generally add equipment complexity and may increase the initial purchase cost.
Does a Thermostatic Griddle Have More BTU Than a Manual Griddle?
No. The control type does not determine the total BTU rating of a commercial gas griddle.
BTU per hour is a measurement of the appliance's rated fuel energy input. A manual griddle and thermostatic griddle can have the same burner input while using different methods to regulate the cooking temperature.
In fact, some manual griddles have higher rated burner inputs than comparable thermostatic models from the same manufacturer.
The following examples illustrate this distinction using commercial griddles available from Nishi Enterprise.
| Model | Control Type | Width | Total Gas Input |
|---|---|---|---|
| Atosa ATMG-24 | Manual | 24 inches | 60,000 BTU/hr |
| Atosa ATTG-24 | Thermostatic | 24 inches | 50,000 BTU/hr |
| Toastmaster TMGM24 | Manual | 24 inches | 40,000 BTU/hr |
| Toastmaster TMGT24 | Thermostatic | 24 inches | 40,000 BTU/hr |
| Dukers DCGM24 | Manual | 24 inches | 60,000 BTU/hr |
| Dukers DCGT48 | Thermostatic | 48 inches | 104,000 BTU/hr |
The Toastmaster models provide an especially useful comparison. Both feature a 24-inch cooking surface, a 3/4-inch steel plate, and a rated gas input of 40,000 BTU/hr. Their primary distinction is the control configuration.
This demonstrates why restaurant owners should compare more than burner input when selecting cooking equipment.
Heat transfer efficiency, plate thickness, burner arrangement, thermostat design, and cooking workload all influence actual performance.
What Is Griddle Temperature Recovery?
Temperature recovery refers to how effectively a griddle returns to its intended cooking temperature after heat is absorbed by food or lost to the surrounding environment.
This is one of the most important performance considerations in high-volume commercial kitchens.
Imagine a burger restaurant receiving a large order during its lunch rush. The cook places multiple refrigerated burger patties on the griddle simultaneously.
Each patty absorbs heat from the cooking plate. As the food load increases, the surface temperature can decrease.
If the griddle cannot recover effectively, cooking times may increase and browning performance may become inconsistent.
Temperature recovery depends on several equipment characteristics:
- Total burner or electrical heating capacity
- Heating capacity relative to cooking surface area
- Griddle plate material and thickness
- Burner arrangement and heat distribution
- Thermostat location and response characteristics
- Food temperature and quantity
- How frequently the cooking surface is reloaded
A manual griddle can recover effectively when it has sufficient heating capacity, appropriate plate construction, and an experienced operator.
A thermostatic griddle can automatically increase or activate heating when its sensing system detects a temperature decrease.
However, the presence of a thermostat does not guarantee faster recovery. A basic thermostatic griddle may recover more slowly than a heavier-duty unit with a more powerful heating system.
Restaurants with demanding cooking volumes should compare the complete equipment design rather than selecting a model based only on its control type.
Does Griddle Plate Thickness Matter?
Yes. Plate thickness is an important factor that is separate from whether a commercial griddle has manual or thermostatic controls.
Commercial griddles are commonly available with steel cooking plates measuring approximately 1/2 inch, 3/4 inch, or 1 inch thick, although other configurations exist.
Thicker steel plates generally have greater thermal mass. This means they can store more heat at a given temperature, assuming comparable materials and cooking surface dimensions.
This can help reduce sudden temperature changes when multiple cold food items are placed on the cooking surface.
However, thicker plates also require more energy to heat from a cold starting condition. A thinner plate may respond more quickly to burner adjustments, depending on the complete heating system.
| Plate Thickness | General Characteristics | Possible Applications |
|---|---|---|
| 1/2 inch | Lower thermal mass and potentially faster initial response | Lighter or intermittent cooking applications, depending on equipment design |
| 3/4 inch | Balance between thermal mass and heating response | General restaurant cooking |
| 1 inch | Greater thermal mass and resistance to sudden temperature changes | Continuous cooking and heavier food loads |
For example, the Dukers DCGM24 Manual Gas Griddle features a 3/4-inch steel plate, while the Atosa ATTG-24 Thermostatic Griddle features a 1-inch plate.
The Dukers DCGT48 also uses a 1-inch cooking plate for its larger 48-inch cooking surface.
These differences can influence performance independently of the control system.
When comparing commercial griddles, consider the control type and plate construction together.
Can Manual and Thermostatic Griddles Have Multiple Cooking Zones?
Yes. Both manual and thermostatic commercial griddles may feature independently controlled heating zones.
Many commercial griddles use separate burners or heating elements distributed across the cooking plate.
Depending on the model, each 12-inch section may have its own control.
For example, a 36-inch commercial griddle may provide three independently controlled heating zones, while a 48-inch model may provide four.
The American Range ARSTG-48 48-Inch Thermostatic Griddle features a 30,000 BTU/hr burner for each 12-inch section.
How Cooking Zones Work on a Manual Griddle
On a manual griddle, the operator adjusts the burner intensity within each zone.
A cook may operate one section at a higher setting for searing proteins and another section at a lower setting for more delicate menu items.
However, the operator is responsible for monitoring how those settings translate into actual cooking surface temperatures.
How Cooking Zones Work on a Thermostatic Griddle
On a thermostatic griddle with separate temperature controls, the operator can select different temperature settings for the individual heating zones.
For example, a breakfast restaurant may use one zone for eggs, another for pancakes, and a third for breakfast meats.
The exact settings should be based on the restaurant's recipes, food-safety procedures, equipment instructions, and verified cooking performance.
Important: Most conventional griddles have one continuous metal plate. Heat can travel between adjacent cooking zones, so independently controlled sections are not necessarily thermally isolated from one another.
Restaurants requiring substantially different surface temperatures across adjacent sections should review the manufacturer's equipment design and operating recommendations.
What Are the Advantages of a Manual Commercial Griddle?
1. Lower Initial Purchase Cost
Manual griddles generally use simpler control arrangements than comparable thermostatic models.
As a result, they are often available at lower initial purchase prices.
This can be particularly attractive to new restaurants, small takeout businesses, food trucks with approved installations, and kitchens working within limited equipment budgets.
2. Straightforward Burner Adjustment
Experienced cooks may prefer having direct control over burner intensity.
They can adjust the heating level according to cooking activity without relying on a selected temperature setpoint.
This can be useful when preparing a variety of menu items using different cooking techniques throughout service.
3. Simpler Control System
A typical manual gas griddle does not require the same temperature-sensing control mechanism found on a thermostatic model.
This may mean fewer temperature-control components to maintain.
However, reliability and repair costs still depend on the manufacturer, construction quality, operating conditions, and maintenance history.
4. Suitable for Experienced Grill Operators
Many experienced line cooks understand how to manage cooking temperatures by adjusting burners and monitoring food behavior.
For these employees, a manual griddle may provide all the control necessary for their cooking workflow.
Restaurants interested in straightforward manual models can compare the Atosa ATMG-24, Dukers DCGM24, and other equipment within our commercial griddle collection.
What Are the Disadvantages of a Manual Commercial Griddle?
1. Greater Dependence on Operator Experience
Because the griddle does not automatically maintain a selected cooking temperature, employees must understand how the equipment responds to changes in burner settings and food loads.
A new employee may need additional training before achieving the same cooking results as an experienced operator.
2. Potentially Greater Temperature Fluctuations
A manual griddle can continue heating at its selected burner setting even when no food is being cooked.
During quiet periods, the cooking surface may become hotter than the operator intends if the heat is not adjusted.
Similarly, a heavy food load can reduce the plate temperature without the burner setting automatically changing in response.
3. More Difficult Recipe Standardization
A restaurant may require a specific surface temperature for a particular menu item.
On a manual griddle, instructions such as turning the knob halfway may not consistently produce the same surface temperature under different operating conditions.
This can make temperature-based recipe standardization more difficult.
4. Potential for Unnecessary Fuel Consumption
If employees leave a manual griddle operating at unnecessarily high burner settings during periods of low demand, fuel consumption may be greater than necessary.
This is an operational consideration rather than a guaranteed disadvantage of every manual model.
Good employee training and appropriate heat management can help reduce avoidable energy consumption.
What Are the Advantages of a Thermostatic Commercial Griddle?
1. More Repeatable Cooking Temperatures
The primary advantage of thermostatic controls is the ability to regulate heat around a selected temperature.
For restaurants preparing the same menu items throughout the day, this can make cooking procedures easier to repeat between different employees and shifts.
Breakfast restaurants, burger chains, sandwich shops, and other standardized foodservice operations may find this particularly useful.
2. Easier Employee Training
Temperature-based controls can simplify operating instructions.
Instead of teaching every employee how a particular burner setting behaves under different conditions, management can establish verified temperature settings for specific recipes.
Employees still need to understand preheating, cooking times, food loading, and temperature verification, but the thermostat can reduce the amount of continuous manual adjustment required.
3. Automatic Response to Temperature Changes
When cold food is placed on the griddle, the temperature control system can respond to the resulting temperature change.
The speed and effectiveness of that response depend on the thermostat design, sensing location, heating capacity, and cooking plate construction.
This automatic regulation can be valuable in kitchens where cooking loads change frequently throughout the day.
4. Reduced Risk of Unnecessary Overheating
A properly functioning thermostatic griddle can reduce or interrupt heating when its selected temperature conditions are satisfied.
This can help prevent unnecessary temperature increases during periods when little or no food is being cooked.
However, thermostatic controls are not a substitute for proper operator supervision, equipment maintenance, or required safety devices.
5. Potential Energy Management Benefits
Automatic temperature regulation can help avoid supplying unnecessary heat when the equipment has already reached its operating target.
The actual energy savings depend on the griddle's design, cooking schedule, selected temperatures, and comparison equipment.
Restaurants should not assume that every thermostatic model is more energy efficient than every manual model.
What Are the Disadvantages of a Thermostatic Commercial Griddle?
1. Higher Initial Purchase Price
Thermostatic models generally require temperature sensors and additional control components.
These features can contribute to a higher purchase price when compared with otherwise similar manual models.
2. Additional Control Components
Temperature sensors, thermostatic valves, and electronic controllers may require inspection, calibration, servicing, or replacement over the equipment's lifetime.
Restaurants should consider manufacturer warranty coverage and service availability when selecting equipment.
3. Temperature Settings Are Not Always Exact Surface Temperatures
Setting a thermostatic griddle to a particular temperature does not guarantee that every point on its cooking surface will maintain that exact temperature.
Actual conditions can vary because of sensor placement, thermostat tolerance, food loading, adjacent heating zones, and equipment condition.
Restaurants should verify cooking performance using appropriate surface temperature measurement methods and food thermometers rather than relying exclusively on the control dial.
Which Type of Commercial Griddle Is Best for Different Restaurants?
The best commercial griddle depends largely on the restaurant's menu and cooking workflow.
Breakfast Restaurants and Diners
Thermostatic griddles are often a practical choice for breakfast restaurants preparing large quantities of pancakes, eggs, French toast, breakfast meats, and grilled sandwiches.
Many of these foods benefit from repeatable cooking conditions, especially when multiple employees operate the same equipment.
A thermostatic model with independently controlled zones may allow a kitchen to organize different breakfast items across the cooking surface.
Examples include the Toastmaster TMGT36 36-Inch Thermostatic Griddle and American Range ARSTG-36.
Burger Restaurants and Smash Burger Shops
Burger restaurants should pay particular attention to burner capacity, plate thermal mass, cooking surface area, and heat recovery.
Both manual and thermostatic griddles can be suitable.
An experienced grill cook may perform very well with a heavy-duty manual griddle. A restaurant serving standardized burgers across multiple shifts may prefer a responsive thermostatic model.
High-volume operations should compare models such as the Dukers DCGT48 48-Inch Thermostatic Griddle and American Range ARSTG-48.
Cheesesteak and Sandwich Shops
Commercial griddles are commonly used to prepare cheesesteaks, grilled onions, vegetables, toasted sandwiches, and other menu items.
A manual griddle may be suitable for an experienced cook managing different cooking intensities throughout service.
A thermostatic griddle may be preferable when the restaurant wants more consistent operating procedures between employees.
Mexican Restaurants and Taco Shops
Mexican restaurants may use commercial griddles for tortillas, quesadillas, grilled meats, vegetables, and other menu components.
Manual controls can provide flexible heat adjustment, while thermostatic controls can be useful for repeated cooking tasks that benefit from standardized surface temperatures.
The required cooking area and recovery performance should be evaluated according to the actual menu and order volume.
Indian Restaurants
Indian restaurants may use commercial flat-top griddles for pav bhaji, tikki, grilled sandwiches, certain flatbreads, and other regional menu items.
Experienced cooks who are familiar with direct heat adjustment may prefer manual models for particular cooking applications.
Thermostatic griddles can also be useful when restaurants want consistent cooking conditions for repeated menu items.
Specialty cooking applications, including dosa preparation and traditional catering, may require equipment with particular surface characteristics, dimensions, and heating arrangements.
Hotels and Institutional Kitchens
Hotels, cafeterias, hospitals, schools, and institutional kitchens may benefit from thermostatic griddles because their production procedures frequently involve standardized recipes and multiple operators.
However, equipment should still be selected based on daily production volume, cooking demands, available utilities, and maintenance requirements.
Are Thermostatic Griddles More Energy Efficient?
Thermostatic controls can help regulate energy input according to cooking surface temperature, but they do not automatically guarantee lower operating costs.
Commercial griddle energy consumption depends on several factors:
- Cooking surface size
- Rated burner or electrical heating input
- Heat transfer efficiency
- Insulation and equipment construction
- Selected operating temperatures
- Preheating and idle operating times
- Food production volume
- Employee operating habits
- Kitchen ventilation conditions
A manual griddle operated carefully and reduced to appropriate settings during quiet periods may be economical to operate.
A thermostatic griddle may help reduce unnecessary heating when the selected temperature has already been reached.
For a high-volume restaurant, it is also important to consider productivity rather than fuel consumption alone.
A griddle that maintains suitable cooking conditions and helps employees complete more orders consistently may provide operational benefits even if its initial purchase price is higher.
Are Thermostatic Griddles Available in Both Gas and Electric Models?
Yes. Thermostatic controls are available on commercial gas and electric griddles.
The distinction between gas and electric equipment is separate from the distinction between manual and thermostatic controls.
Gas griddles use burners to heat the cooking plate, while electric griddles use electrical heating elements.
For example, the Vulcan HEG36E 36-Inch Electric Griddle provides thermostatically controlled electric heating.
The Star Ultra-Max 736TA 36-Inch Electric Griddle is another thermostatically controlled electric option.
Restaurants comparing gas and electric griddles should verify available utilities, electrical infrastructure, gas supply capacity, equipment input, cooking requirements, installation specifications, and local regulations.
If purchasing gas equipment, confirm whether your restaurant uses natural gas or liquid propane.
Read our guide on What Is the Difference Between Natural Gas and Propane Restaurant Equipment? for additional information.
Is Manual Ignition the Same as Manual Temperature Control?
No. These are two different equipment features that can easily be confused when reviewing commercial griddle specifications.
Manual ignition refers to how the burner or pilot system is started.
Manual temperature control refers to how the operator regulates heat during cooking.
A thermostatic gas griddle can have a manual ignition system while still automatically controlling the cooking plate temperature.
For example, certain Vulcan thermostatic griddles use mechanical thermostats alongside manual ignition arrangements.
Similarly, the presence of electronic ignition does not automatically mean a griddle offers advanced electronic temperature regulation.
Restaurant owners should review ignition type and temperature control type separately when comparing equipment.
How Much Does the Size of a Commercial Griddle Matter?
Choosing between manual and thermostatic controls is only one part of purchasing a commercial griddle.
The cooking surface must also be large enough to handle the restaurant's busiest service periods.
| Griddle Width | General Application |
|---|---|
| 24 inches | Compact kitchens, cafés, smaller restaurants, and supplemental cooking stations |
| 36 inches | Diners, sandwich shops, medium-volume restaurants, and breakfast operations |
| 48 inches | Busy burger restaurants, breakfast kitchens, and high-volume cooking stations |
| 60 inches and larger | Larger production kitchens and operations requiring substantial flat-top cooking capacity |
These are general planning examples rather than fixed recommendations.
A restaurant's ideal griddle size depends on the dimensions of its menu items, simultaneous cooking requirements, cooking times, kitchen layout, and available hood space.
A restaurant preparing a large number of burgers may require more cooking area than a restaurant that uses its griddle primarily for occasional sandwich preparation.
Explore our commercial flat-top griddle collection to compare available widths, control configurations, and plate construction.
What Should You Look for When Buying a Commercial Griddle?
Before purchasing a manual or thermostatic commercial griddle, evaluate the following equipment characteristics.
1. Cooking Surface Dimensions
Check both the width and depth of the usable cooking surface.
The overall appliance dimensions may be different from the actual dimensions available for cooking.
Make sure the griddle can accommodate the number and size of food portions the restaurant needs to cook simultaneously.
2. Plate Thickness and Material
Compare the cooking plate's thickness, material, finish, and thermal characteristics.
Steel, chrome-plated, and specialty composite cooking plates may have different heat transfer, cleaning, and operating requirements.
Follow the manufacturer's instructions when selecting utensils and cleaning products.
3. Control Configuration
Determine whether the restaurant needs direct manual burner adjustment or automatic temperature regulation.
If purchasing a thermostatic griddle, compare its thermostat technology and sensing arrangement where that information is available.
4. Burner or Heating Element Arrangement
Look at the total heating input and how the heating sources are distributed across the cooking surface.
Multiple independently controlled burners can provide flexibility when cooking different menu items simultaneously.
5. Grease Management
Commercial griddles typically feature grease troughs and removable grease collection containers.
Check the accessibility, capacity, and cleaning requirements of these components.
Busy burger restaurants and breakfast operations may produce substantial quantities of grease during service.
6. Gas and Electrical Requirements
Verify the equipment's intended gas type or electrical specifications before purchasing.
Gas appliances may also require appropriate commercial gas connectors, regulators, and restraints depending on their installation.
Nishi Enterprise carries commercial gas connectors and quick-disconnect assemblies for compatible restaurant equipment.
Read our guide on What Is a Gas Quick Disconnect on Restaurant Equipment? for additional information.
7. Equipment Support and Working Height
Countertop griddles require a suitable supporting surface rated for the equipment's weight, temperature exposure, and installation requirements.
Restaurants frequently install these appliances on compatible commercial stainless steel equipment stands.
For example, the Atosa SE3024ECR2 Equipment Stand and Atosa SE3036ECR2 Equipment Stand illustrate different stand sizes that can be evaluated for compatible countertop equipment installations.
Always verify the appliance footprint, support points, load rating, clearances, and required legs before purchasing a stand.
Restaurants that want refrigerated storage beneath the cooking equipment may also consider a compatible refrigerated chef base.
Learn more in our articles on commercial equipment stands and commercial chef base refrigerators.
8. Commercial Kitchen Ventilation
Both manual and thermostatic griddles can produce grease-laden vapors, smoke, heat, and other cooking emissions.
The type of temperature control does not eliminate commercial kitchen ventilation requirements.
Restaurants must evaluate the appliance listing, cooking process, installation instructions, fire-suppression requirements, and applicable local codes.
If you are planning a new cooking line, read our guide on How Should You Plan a Restaurant Cook Line Under a Hood?
How Do You Check the Surface Temperature of a Commercial Griddle?
Temperature verification is useful for both manual and thermostatic commercial griddles.
A manual griddle operator may need to check surface temperatures to develop consistent burner settings for particular cooking tasks.
A thermostatic griddle operator may need to verify that the actual cooking surface temperature corresponds reasonably with the selected control setting.
A suitable griddle surface temperature probe can be used according to the measurement equipment and griddle manufacturer's instructions.
Infrared thermometers may also be useful in certain circumstances, but readings can be affected by surface emissivity, reflective metal finishes, measurement distance, and other conditions.
Restaurants using polished steel or chrome cooking surfaces should be especially careful about relying on infrared readings without an appropriate measurement procedure.
For food safety, the cooking surface temperature is not a substitute for measuring the internal temperature of the food.
Restaurants should use appropriate food thermometers and follow applicable cooking temperature requirements.
If a thermostatic griddle consistently operates outside its expected temperature range, consult the manufacturer's calibration and service instructions. Qualified technicians should perform adjustments or repairs that exceed approved operator maintenance procedures.
Do Manual and Thermostatic Griddles Have Different Cleaning Requirements?
Routine cooking surface cleaning is generally more dependent on the griddle plate material and manufacturer instructions than on the control configuration.
Both manual and thermostatic griddles accumulate food residue, grease, and cooking deposits during normal operation.
Restaurants should establish regular cleaning procedures that include:
- Removing food residue throughout service using approved tools
- Cleaning grease troughs and collection containers
- Cleaning the cooking surface according to the manufacturer's instructions
- Wiping accessible exterior surfaces
- Inspecting controls for grease buildup or damage
- Maintaining appropriate access around the equipment
- Scheduling professional service when operating problems develop
Thermostatic models may also require periodic temperature accuracy verification and calibration when specified by the manufacturer.
Do not assume that cleaning techniques suitable for a conventional steel griddle are appropriate for chrome-plated or specialty cooking surfaces.
Improper cleaning products and abrasive tools can damage certain cooking plate finishes.
Which Griddle Should a New Restaurant Purchase?
For a new restaurant, the decision should begin with the menu and expected cooking workflow rather than simply choosing the least expensive or most advanced equipment.
A manual commercial griddle may be the better choice if:
- Your initial equipment budget is limited.
- Your cooks are experienced with direct burner adjustment.
- Your menu requires flexible heating levels throughout service.
- You prefer a straightforward control system.
- You have procedures for monitoring and managing surface temperatures.
A thermostatic commercial griddle may be the better choice if:
- Your restaurant emphasizes standardized recipes.
- Multiple employees will operate the griddle throughout the week.
- Your menu requires repeatable cooking conditions.
- You want automatic temperature-based heat regulation.
- The additional purchase cost is justified by your operating requirements.
Restaurants with high-volume cooking demands should also prioritize plate construction, heating capacity, recovery performance, cooking surface dimensions, and equipment durability regardless of which control configuration they choose.
Frequently Asked Questions About Manual and Thermostatic Commercial Griddles
What Is the Main Difference Between a Manual and Thermostatic Griddle?
A manual griddle allows the operator to directly adjust heating intensity. A thermostatic griddle automatically regulates heat in response to temperature measurements and a selected temperature setting.
Is a Thermostatic Griddle Worth the Extra Money?
It can be worthwhile for restaurants that need more repeatable cooking temperatures, standardized employee procedures, and automatic heat regulation.
Restaurants with experienced operators and less demanding temperature consistency requirements may find a manual griddle sufficient.
Does a Thermostatic Griddle Heat Up Faster?
Not necessarily. Preheating speed depends on heating capacity, plate thickness, construction materials, starting temperature, and equipment design.
The presence of a thermostat alone does not establish how quickly a griddle heats up.
Can a Manual Griddle Get Hotter Than a Thermostatic Griddle?
Potentially, depending on the equipment and operating conditions. Manual and thermostatic griddles have different heating and temperature-control arrangements.
Restaurants should select equipment based on its intended operating range rather than attempting to exceed manufacturer temperature limits.
Are Thermostatic Griddles Better for Pancakes?
Thermostatic controls can be particularly useful for pancakes because repeatable cooking surface temperatures can help achieve consistent browning between batches.
However, experienced cooks can also prepare pancakes successfully on properly managed manual griddles.
Are Manual Griddles Good for Smash Burgers?
Yes. A commercial manual griddle with appropriate heating capacity, cooking surface area, and plate construction can be suitable for preparing smash burgers.
Thermostatic models can also be effective, particularly when the restaurant needs repeatable cooking conditions across multiple employees.
Does a Thermostatic Griddle Use Less Gas?
It may reduce unnecessary heating by automatically regulating burner operation, but actual gas consumption depends on equipment design, cooking volume, temperature settings, efficiency, and employee operating practices.
Can You Convert a Manual Griddle Into a Thermostatic Griddle?
Do not assume that this conversion is possible. Manual and thermostatic models may use different valves, sensing components, cooking plate arrangements, and equipment certifications.
Only manufacturer-authorized conversions should be considered, and any approved work must be performed by appropriately qualified personnel.
Do Thermostatic Griddles Need Calibration?
Some thermostatic griddles require periodic temperature accuracy checks or calibration according to manufacturer instructions.
The maintenance procedure depends on the specific control system and equipment model.
Do Commercial Gas Griddles Require Electricity?
Some commercial gas griddles use mechanical controls and ignition arrangements that do not require an external electrical supply for normal operation. Other models use electronic ignition, digital controls, or additional electrical components.
Verify the electrical requirements of the exact model before purchasing.
Can You Cook Different Foods at Different Temperatures on the Same Griddle?
Many commercial griddles have independently controlled heating zones, making it possible to establish different cooking conditions across the plate.
However, heat can travel between adjacent zones on a continuous metal surface, so actual temperature separation depends on the equipment design.
Is a Commercial Griddle the Same as a Charbroiler?
No. A griddle uses a solid flat cooking surface, while a charbroiler uses open cooking grates and a different heat transfer arrangement.
For a complete comparison, read our article on Charbroiler vs. Griddle: Which Is Better for Your Menu?
Shop Manual and Thermostatic Commercial Griddles at Nishi Enterprise
Choosing between a manual and thermostatic commercial griddle comes down to how your restaurant operates.
Manual griddles provide straightforward burner adjustment and are often available at lower initial purchase prices. Thermostatic griddles provide automatic temperature regulation and can help restaurants achieve more repeatable cooking conditions.
Both equipment types can deliver excellent cooking results when properly selected, installed, operated, and maintained.
At Nishi Enterprise, we supply commercial gas and electric griddles for restaurants, diners, burger shops, cafés, hotels, catering businesses, and other professional foodservice kitchens.
Our selection includes manual and thermostatic griddles from leading commercial equipment manufacturers, including Atosa, Dukers, American Range, Toastmaster, and Vulcan.
Whether you are looking for a compact 24-inch manual griddle or a heavy-duty 48-inch thermostatic flat top, our team can help you compare equipment configurations and identify options suitable for your cooking requirements.
Browse Commercial Griddles and Flat Top Grills at Nishi Enterprise to compare available models.
You can also explore our complete commercial cooking equipment collection, shop commercial equipment stands, or visit our showroom at 4455 S Clinton Ave, South Plainfield, NJ 07080.

