Two feet of flat top is the sweet spot for a lot of small operations: enough room for a breakfast rush or a lunch burger run, but compact enough to share a counter with other equipment. The Dukers DCGM24 is a manual countertop griddle built for exactly that kind of diner, deli or food truck line.
Two 30,000 BTU/hr burners, 60,000 BTU/hr in total, sit under a 3/4" thick polished steel plate with a 23.86" x 20.50" cooking area. Each 12" section has its own manual control and standby pilot, and the footprint is 24" wide by 30" deep.
What you will notice in day-to-day use
- A zone for every job. Each 12" section has its own manual control, so with 2 burners you can sear, cook and hold at the same time.
- Steady heat, edge to edge. A heavy 3/4" polished steel plate spreads the burner heat out and keeps it there, for fewer cold spots across the 23.86" x 20.50" cooking surface.
- Ready at the turn of a knob. Standby pilots keep every burner ready to light when the first order comes in.
- Easy grease management. A full-length seamless drip pan catches grease along the whole plate and lifts out for emptying and cleaning.
- Stainless, adjustable, solid. The stainless steel exterior and interior stand up to daily scrubbing, and adjustable stainless steel legs take the height from 15-1/4" up to 17-5/8".
Choosing your setup
Gas type: it runs on natural gas or LP; pick yours above. Every unit ships set for natural gas with an LP conversion kit in the box, and the conversion should be done by a qualified gas technician.
| Gas | Each burner | Total input | Gas pressure | Nozzle |
|---|---|---|---|---|
| Natural gas | 30,000 BTU/hr | 60,000 BTU/hr | 4" W.C. | #37 |
| Liquid propane | 30,000 BTU/hr | 60,000 BTU/hr | 10" W.C. | #51 |
Specifications
| Brand | Dukers |
| Model | DCGM24 |
| Type | Countertop gas griddle, manual controls |
| Burners | 2 x 30,000 BTU/hr, standby pilots |
| Total input | 60,000 BTU/hr |
| Controls | Independent manual control every 12" |
| Griddle plate | 3/4" thick polished steel |
| Cooking area | 23.86" x 20.50" |
| Gas type | Ships for natural gas; LP conversion kit included |
| Gas connection | 3/4" NPT |
| Construction | Stainless steel exterior and interior |
| Legs | Adjustable, 15-1/4" – 17-5/8" high |
| Dimensions (W x D x H) | 24" x 30" x 15-1/4" |
Before it arrives
- Gas: 3/4" NPT inlet; a qualified installer should connect it and fit the LP kit if needed.
- Ventilation: install it under a commercial hood following your local code.
- Counter or stand: 24" wide and 30" deep so use a sturdy, non-combustible counter or stand and keep the clearances in the installation manual.
Warranty
1 year parts and labor from Dukers.
Specifications per Dukers data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

