A commercial kitchen hood is only as useful as the cook line underneath it.
You can have a properly sized hood, good exhaust airflow, and quality cooking equipment, but if the appliances are arranged poorly, the kitchen can still feel cramped, inefficient, and difficult to operate.
Planning a restaurant cook line means deciding:
- Which equipment goes under the hood
- What order the equipment should be in
- How much space each appliance needs
- Where cooks will stand
- How food moves through the kitchen
- Where gas and electrical connections are located
- How equipment will be cleaned and serviced
- Whether the hood properly covers the entire cooking area
The best cook line is not simply the one that fits the most equipment under the hood.
It is the one that allows the kitchen to produce food quickly, safely, and consistently during the busiest part of service.
This guide explains how to plan a restaurant cook line under a commercial hood, how to group cooking equipment, what measurements matter, and what restaurant owners should consider before purchasing equipment.
What Is a Restaurant Cook Line?
The cook line is the main area where hot food is prepared during service.
It often includes equipment such as:
- Commercial ranges
- Fryers
- Griddles
- Charbroilers
- Stock pot ranges
- Wok ranges
- Salamanders
- Tandoors
- Commercial ovens
Much of this equipment may be positioned beneath a Type I commercial kitchen hood because it produces heat, smoke, or grease-laden cooking vapor.
Start With the Menu, Not the Equipment
The most important first step is not choosing appliances.
It is understanding the menu.
Your menu determines:
- Cooking methods
- Production volume
- Equipment types
- Equipment sizes
- How many cooking stations you need
A burger restaurant and an Indian restaurant may both use a Type I hood, but their cook lines can look completely different.
Example: Burger Restaurant Cook Line
A burger restaurant may need:
- Griddle
- Charbroiler
- Two fryers
- Range or hot plate
Example: Indian Restaurant Cook Line
An Indian restaurant may need:
- Tandoor
- Commercial range
- Stock pot range
- Fryer
- Wok range
Nishi Enterprise carries Commercial Cooking Equipment for a wide variety of restaurant concepts.
Step 1: List Every Cooking Appliance
Before designing the layout, create a complete list of the equipment you expect to place beneath the hood.
For each appliance, record:
- Manufacturer
- Model number
- Width
- Depth
- Overall height
- Cooking-surface height
- Gas or electric
- BTU input if gas
- Voltage if electric
- Phase if applicable
Using exact model numbers is much better than designing around rough descriptions such as "one fryer" or "one range."
Step 2: Measure the Hood
If the hood already exists, measure:
- Total hood length
- Total hood depth
- Height above the finished floor
- Distance from cooking surfaces to the hood
Also identify the hood manufacturer and model if possible.
Do Not Assume Hood Length Equals Equipment Length
A common mistake is assuming:
10-foot hood = 10 feet of equipment.
That is not always correct.
The hood generally needs to provide coverage beyond the active cooking surfaces.
This extra coverage is commonly referred to as:
hood overhang.
Why Hood Overhang Matters
Cooking smoke and heat spread outward as they rise.
If equipment is positioned too close to the edge of the hood, some of the cooking plume may escape.
This means you should plan the equipment within the hood's usable capture area, not simply fill every inch underneath the stainless steel canopy.
Step 3: Add Up the Equipment Widths
Once you know the exact dimensions, add the appliance widths together.
For example:
- 36-inch range
- 24-inch fryer
- 24-inch fryer
- 36-inch griddle
Total equipment width:
120 inches.
Then compare that total with the usable space beneath the hood.
Width Is Only the Beginning
Even if all the appliances fit from left to right, you still need to check:
- Depth
- Height
- Clearances
- Utilities
- Workflow
Step 4: Check Equipment Depth
Restaurant cooking equipment can vary significantly in depth.
A deep range or charbroiler can extend farther toward the front edge of the hood than a shallower appliance.
This can affect:
- Front hood coverage
- Aisle space
- Employee movement
Why Depth Matters Under a Hood
Imagine two pieces of equipment that are both 36 inches wide.
One is relatively shallow.
The other extends much farther into the kitchen.
They take up the same amount of horizontal cook-line space, but they do not interact with the hood or aisle in the same way.
Step 5: Check Equipment Height
The height of the cooking surface matters because the hood is installed at a specific distance above the equipment.
Different appliances may sit at very different heights.
Compare:
- Range
- Stock pot range
- Countertop griddle
- Tandoor
Do not assume every piece of equipment will line up perfectly underneath the same hood.
Countertop Equipment Needs a Base
A countertop charbroiler or griddle may be relatively short on its own.
But once it is installed on:
- Equipment stand
- Chef base
- Commercial worktable
its cooking surface moves higher.
Use the final installed height when planning the line.
Step 6: Group Equipment by Function
A good cook line should reflect how food is actually prepared.
Instead of placing equipment randomly, group appliances by function.
Examples include:
- Fry station
- Grill station
- Sauté station
- Wok station
- Tandoor station
- Stock pot or curry station
What Is a Fry Station?
A fry station may include:
- One or more fryers
- Nearby landing area
- Basket storage
- Seasoning area
Nishi Enterprise carries Commercial Fryers.
What Is a Sauté Station?
A sauté station may center around a commercial range.
The cook may need nearby access to:
- Pans
- Sauces
- Oils
- Ingredients
Nishi Enterprise carries Commercial Ranges in multiple configurations.
What Is a Grill Station?
A grill station may use:
- Charbroiler
- Griddle
- Salamander
The station should be positioned so the cook can move food efficiently between cooking, finishing, and plating areas.
What Is a Tandoor Station?
An Indian restaurant may create a dedicated tandoor station for:
- Naan
- Tandoori chicken
- Chicken tikka
- Seekh kebabs
- Paneer tikka
Nishi Enterprise carries Commercial Tandoors for restaurant kitchens.
Tandoors Need Extra Vertical Working Space
A tandoor is operated through the top opening.
The cook needs enough overhead room for:
- Long skewers
- Naan tools
- Bread pads
- Removing cooked food
This makes vertical hood clearance especially important.
What Is a Wok Station?
A wok station may include one or more high-output wok burners.
These stations are common in Chinese and other Asian restaurant kitchens.
Nishi Enterprise carries Commercial Wok Ranges.
What Is a Stock Pot Station?
A stock pot station may be used for:
- Soups
- Stocks
- Curries
- Sauces
- Large-batch cooking
A Commercial Stock Pot Range sits lower than many other appliances, so the height of the pot itself also needs to be considered.
Step 7: Arrange Equipment in the Order Food Moves
A good cook line reduces unnecessary movement.
Think about what happens to an order from the moment it reaches the kitchen until the food is plated.
Equipment that frequently works together should generally be reasonably close together.
Example: Burger Line
A simple burger concept might use:
Griddle | Charbroiler | Fryer | Fryer
The exact order depends on the menu and workflow, but grouping similar cooking processes can make service easier.
Example: Indian Restaurant Line
An Indian restaurant might use a line such as:
Stock Pot Range | Range | Fryer | Tandoor
or:
Range | Stock Pot Range | Fryer | Tandoor
depending on the kitchen layout and how dishes move through service.
There Is No Universal Perfect Equipment Order
The best order depends on:
- Menu
- Kitchen staffing
- Prep location
- Expo location
- Refrigeration location
- Volume
A layout that works well for one restaurant may be inefficient for another.
Step 8: Put High-Volume Equipment Where It Is Easy to Access
The appliances used most frequently during service should not be hidden in awkward corners of the cook line.
For example, if 60 percent of your menu uses the griddle, that griddle is a major production station.
It should have:
- Comfortable working space
- Easy ingredient access
- Nearby landing space
Step 9: Think About Refrigeration Near the Cook Line
The equipment under the hood is only part of the station.
Cooks also need refrigerated ingredients.
Depending on the restaurant, nearby refrigeration may include:
- Chef base
- Undercounter refrigerator
- Reach-in refrigerator
- Refrigerated prep table
Nishi Enterprise carries Commercial Refrigeration for restaurant kitchens.
Why a Chef Base Can Help a Cook Line
A chef base places refrigerated drawers underneath countertop cooking equipment.
This can allow cooks to keep ingredients directly beneath the station.
It can be useful under equipment such as:
- Griddles
- Charbroilers
- Countertop cooking equipment
However, the combined height of the chef base and cooking equipment must still work with the hood.
Step 10: Leave Landing Space Where It Is Needed
Cooks need somewhere to place:
- Pans
- Plates
- Hotel pans
- Utensils
- Finished food
If every inch of space is filled with hot equipment, there may be nowhere to safely set anything down.
Why Landing Space Matters Near Fryers
When fryer baskets come out of hot oil, employees need an efficient place to:
- Drain food
- Season food
- Transfer food to a pan or plate
This station should be thought through before finalizing the line.
Why Landing Space Matters Near Ranges
Range cooks may need room for:
- Hot pans
- Lids
- Ingredients
- Finished dishes
Step 11: Think About the Expo or Plating Area
Food needs to move from the cook line to the final service area.
The expo station may include:
- Heat lamps
- Pass shelf
- Plating area
- Order tickets or display screens
Try to minimize unnecessary walking between the cook line and expo.
Step 12: Keep Raw and Finished Food Workflow in Mind
Kitchen flow should avoid unnecessary crossover between:
- Raw ingredients
- Cooked food
- Dirty cookware
- Clean plating areas
This is another reason the cook line should be considered as part of the entire kitchen rather than designed by itself.
Step 13: Plan Employee Positions
Ask how many cooks will work on the line during the busiest service.
You may have:
- One cook
- Two cooks
- Four cooks
- Several specialized stations
The line should allow those employees to work without constantly colliding.
Draw Where Each Cook Stands
This is a simple but useful planning method.
Draw the cook line and mark where each employee is expected to stand.
Then imagine:
- Opening oven doors
- Removing fryer baskets
- Carrying pans
- Walking behind another employee
This often reveals layout problems before construction begins.
Step 14: Check Aisle Space
The cook line takes up more space than the equipment itself.
You also need working room in front of the appliances.
A deeper range or oven can reduce the usable aisle behind the cook.
This can create congestion even if the appliance fits beneath the hood.
Do Not Design the Cook Line Without Measuring the Room
A piece of equipment can fit under the hood and still make the overall kitchen layout impractical.
Always consider:
- Cook-line depth
- Aisle width
- Opposing prep tables
- Refrigeration
- Door swings
Step 15: Check Oven Door Swing
A range may fit perfectly under the hood until someone opens the oven door.
Make sure there is enough room in front of equipment for:
- Oven doors
- Cabinet doors
- Fryer doors
- Access panels
Step 16: Plan for Cleaning
Cooking equipment creates:
- Grease
- Food debris
- Oil
- Carbon buildup
The cook line should be designed so employees can clean around the equipment.
Casters Can Make Cleaning Easier
Some restaurant cooking equipment can be installed on casters, allowing the equipment to be moved for cleaning and service when properly connected.
However, changing between legs and casters can also change the appliance height.
Step 17: Plan for Service Access
Restaurant equipment eventually needs maintenance.
Technicians may need access to:
- Burners
- Gas valves
- Electrical components
- Rear panels
- Side panels
A cook line packed too tightly can make servicing equipment more difficult.
Step 18: Check Gas Capacity
If several gas appliances share the cook line, consider the total BTU load.
Equipment may include:
- Range
- Fryer
- Charbroiler
- Stock pot range
- Wok range
- Tandoor
The building's gas system needs to support the combined demand.
Do Not Assume an Available Gas Connection Is Enough
A gas stub behind the cook line does not automatically mean it can support any appliance you connect to it.
The total kitchen gas demand should be evaluated.
Step 19: Check Electrical Requirements
Some cook lines use a mixture of gas and electric equipment.
Electric equipment may require:
- 120V
- 208V
- 240V
- Single-phase power
- Three-phase power
Before ordering equipment, check the exact electrical specifications.
Gas Equipment May Still Need Electricity
Some gas appliances use electrical power for:
- Controls
- Ignition
- Motors
- Fans
Always review the complete spec sheet.
Step 20: Consider Fire Suppression
A Type I hood generally works together with the appropriate fire-suppression system for the cooking area.
The appliance layout matters.
Changing from:
Range | Fryer | Griddle
to:
Fryer | Fryer | Charbroiler
can change the protected cooking hazards even if the total width remains similar.
Do Not Rearrange the Line Without Considering Fire Suppression
Moving equipment may affect:
- Suppression coverage
- Hood coverage
- Utility connections
Significant changes should be reviewed before installation.
Step 21: Consider the Heaviest Cooking Equipment
Some appliances create much more smoke, grease, and heat than others.
Examples can include:
- Charbroilers
- High-output wok ranges
- Multiple fryers
These appliances should not be treated the same as lighter cooking equipment when planning the hood.
Step 22: Avoid Putting High-Smoke Equipment at the Edge Without Review
The edges of a canopy hood can be more sensitive to smoke escaping if the equipment is too close to the boundary of the capture area.
When possible, the full appliance arrangement should be considered rather than simply filling the available space from one end to the other.
Step 23: Think About Heat Between Appliances
Multiple hot appliances packed together can create a very intense section of the cook line.
This can affect:
- Employee comfort
- Adjacent equipment
- Workflow
Manufacturer clearance requirements should also be followed.
Step 24: Think About the Order of Similar Appliances
Grouping similar appliances can sometimes simplify workflow.
For example:
Fryer | Fryer
may make more sense than:
Fryer | Range | Fryer
if one employee handles both fryers.
However, the best arrangement depends on staffing and menu production.
Step 25: Think About What Happens During the Rush
Do not design the line around a quiet afternoon.
Imagine the busiest 30 minutes of dinner service.
Ask:
- Which appliances are all running?
- How many cooks are on the line?
- Where are raw ingredients coming from?
- Where does finished food go?
- Where are dirty pans going?
A good cook line should still work during peak volume.
Should You Maximize the Number of Appliances Under the Hood?
Not necessarily.
More equipment can increase production capacity, but too much equipment can create:
- Congestion
- Less landing space
- Less cleaning access
- Less service access
- More heat
The goal should be the right amount of equipment for the menu and volume.
Could One Larger Appliance Replace Two Smaller Ones?
Sometimes.
For example, restaurants may compare:
- Two small fryers vs. one larger fryer setup
- Two hot plates vs. one commercial range
- Several small countertop units vs. one larger appliance
The answer depends on production needs and how much flexibility the kitchen requires.
Why Redundancy Can Still Be Useful
One large appliance is not always better.
Two smaller appliances can sometimes provide:
- Separate cooking temperatures
- Menu flexibility
- Backup capacity
The cook line should balance space efficiency with operational flexibility.
Planning a Cook Line for a Small Restaurant
A small restaurant may need to make every inch count.
Priorities should include:
- Only essential cooking equipment
- Compact equipment sizes
- Multi-purpose appliances
- Nearby refrigeration
- Enough landing space
Planning a Cook Line for a High-Volume Restaurant
A high-volume operation may need:
- Multiple fryers
- Larger griddle
- More burners
- Separate cooking stations
- Additional cooks
Capacity should be designed around peak demand rather than average volume.
Planning a Cook Line for a Takeout Restaurant
Takeout restaurants often need speed more than elaborate plating space.
The cook line should support rapid movement from:
Order → Cooking → Packing → Pickup
Equipment arrangement should reflect that flow.
Planning a Cook Line for a Full-Service Restaurant
A full-service kitchen may need more specialized stations for:
- Appetizers
- Entrées
- Sauté
- Grill
- Fry
- Finishing
The cook line may therefore be longer or divided into multiple sections.
Planning an Indian Restaurant Cook Line
An Indian restaurant may need several different cooking processes operating at once.
A typical equipment package could include:
The best arrangement depends on how the menu is divided between cooks.
Example Indian Restaurant Layout
One possible layout might be:
Stock Pot Range | Range | Fryer | Tandoor
Another might be:
Tandoor | Range | Stock Pot Range | Fryer
Neither is automatically correct.
The right answer depends on:
- Who operates each station
- Where ingredients are stored
- Where finished food is plated
- Available hood coverage
Should the Tandoor Be at the End of the Line?
Sometimes that can make operational sense because tandoor cooks use long skewers and need overhead working room.
However, the hood still needs to provide appropriate coverage, so positioning a tandoor at the edge should be evaluated carefully.
Planning a Chinese Restaurant Cook Line
A Chinese restaurant may use:
- Wok range
- Fryer
- Stock pot range
- Commercial range
The wok station may represent the center of production and should be positioned for efficient ingredient access.
Planning a Burger Restaurant Cook Line
A burger restaurant may use:
- Griddle
- Charbroiler
- Fryers
Because burgers and fries are often ordered together, the layout should minimize unnecessary movement between these stations and the packaging or expo area.
Planning a Pizzeria Cook Line
A pizzeria may use:
- Pizza oven
- Fryer
- Range
- Cheese melter
The pizza oven may not always be positioned under the same hood as the rest of the cook line, depending on the oven and installation.
Planning a Diner Cook Line
Diners often have diverse menus and may require:
- Large griddle
- Range
- Fryers
- Charbroiler
The griddle may be especially important because breakfast foods, burgers, sandwiches, and other menu items can all rely on it.
What if You Are Using an Existing Hood?
When taking over an existing restaurant, start with the hood and utility infrastructure already in place.
Document:
- Hood length
- Hood depth
- Hood type
- Existing fire suppression
- Gas connections
- Electrical connections
- Previous appliance lineup
Then design your new cook line around what the system can appropriately support.
Do Not Assume the Previous Layout Is Best
The previous restaurant may have had:
- Different menu
- Different staffing
- Different volume
- Different workflow
You may be able to improve the layout even while reusing the same hood.
Can You Add More Equipment Under an Existing Hood?
Possibly, but open floor space is not automatically usable cooking space.
Adding equipment can affect:
- Hood coverage
- Cooking load
- Fire suppression
- Gas capacity
- Electrical capacity
- Aisle space
Can You Leave Empty Space Under the Hood?
Yes.
You do not need to fill every inch simply because the hood is available.
Leaving space can provide room for:
- Future equipment
- Landing space
- Better workflow
Can Non-Cooking Equipment Go Under a Hood?
Sometimes, but valuable hood space is usually best reserved for cooking equipment that actually needs to be there.
Equipment such as refrigeration and prep tables may be more useful elsewhere in the kitchen unless the layout specifically benefits from placing them near the line.
Should You Plan for Future Growth?
Yes, within reason.
If you expect the restaurant to grow, consider whether you may eventually need:
- Second fryer
- Second tandoor
- Larger griddle
- Additional range
Planning for future capacity can be easier than redesigning a completely full cook line later.
Do Not Oversize Everything Just in Case
Oversized equipment and ventilation can use:
- More space
- More energy
- More construction budget
The goal is to leave reasonable flexibility without building a kitchen far larger than the restaurant actually needs.
Create a Simple Cook-Line Drawing
Before purchasing equipment, draw a simple plan.
Use each appliance's actual dimensions.
For example:
36" Range | 24" Fryer | 24" Fryer | 36" Griddle
Then mark:
- Hood boundaries
- Gas connections
- Electrical connections
- Refrigeration
- Prep area
- Expo area
Draw a Top-Down View
A front elevation helps you see equipment width.
A top-down layout helps you see:
- Equipment depth
- Aisle space
- Door swings
- Cook positions
- Nearby prep tables
Use Exact Product Spec Sheets
Once the concept layout looks good, replace rough equipment sizes with the exact manufacturer dimensions.
This is especially important for:
- Ranges
- Fryers
- Wok ranges
- Tandoors
- Countertop equipment on stands
Cook-Line Planning Checklist
Before finalizing a restaurant cook line under a hood, check:
- Final menu
- Cooking methods
- Peak production volume
- Exact equipment models
- Total equipment width
- Equipment depth
- Equipment height
- Hood length
- Hood depth
- Hood coverage
- Fire-suppression coverage
- Gas capacity
- Electrical capacity
- Nearby refrigeration
- Landing space
- Prep access
- Expo location
- Employee positions
- Aisle space
- Cleaning access
- Service access
- Future expansion
Frequently Asked Questions
How should you plan a restaurant cook line under a hood?
Start with the menu, choose the equipment required to produce it, collect exact appliance dimensions, measure the hood, and arrange the equipment based on workflow, hood coverage, utilities, fire suppression, and employee working space.
What equipment normally goes on a restaurant cook line?
A cook line may include ranges, fryers, griddles, charbroilers, stock pot ranges, wok ranges, tandoors, ovens, and other hot cooking equipment.
Should you plan the hood or equipment first?
The equipment and hood should be planned together, but the menu and major cooking equipment should generally be identified before the hood layout is finalized.
Should similar equipment be grouped together?
Often yes, especially when one employee operates multiple similar appliances. However, workflow should determine the final arrangement.
Should fryers be next to each other?
They often are because this can create a dedicated fry station, but the right layout depends on the restaurant's menu and staffing.
Where should a griddle go on the cook line?
The griddle should be positioned where it supports the restaurant's workflow and remains properly covered by the hood.
Where should a tandoor go?
The tandoor should have adequate hood coverage and enough overhead working space for skewers and bread tools. Its position should also work with the restaurant's production flow.
Can a tandoor go at the end of a hood?
Potentially, but the hood still needs to provide adequate coverage, so the exact position should be evaluated.
How much equipment can you put under a hood?
That depends on the hood's usable capture area, equipment dimensions, cooking duty, fire suppression, utilities, and local requirements.
Can you fill the entire hood with equipment?
Not necessarily. Required hood coverage and overhang can mean the usable cooking area is smaller than the overall hood dimensions.
Should there be empty space between appliances?
It depends on the equipment and manufacturer requirements. Commercial appliances are often installed close together, but required clearances still need to be followed.
Does equipment depth matter?
Yes. Deep appliances can extend farther toward the front edge of the hood and reduce aisle space.
Does equipment height matter?
Yes. The cooking-surface height affects the appliance's relationship to the hood.
Can countertop equipment go on a chef base under a hood?
Potentially. Use the combined height of the chef base and cooking equipment when evaluating hood clearance.
Should refrigeration be near the cook line?
Usually. Easy access to refrigerated ingredients can reduce unnecessary movement during service.
How much landing space should a cook line have?
There is no single amount that works for every restaurant. The key is to provide enough practical space for pans, plates, ingredients, and finished food without interfering with cooking.
Can I add another fryer later?
Possibly. Planning some future flexibility can help, but the hood, fire suppression, gas or electrical capacity, and available space would still need to support the new appliance.
Can I rearrange equipment under an existing hood?
Possibly, but changing appliance positions can affect hood coverage, fire suppression, utilities, and workflow.
Should I use exact model numbers when planning?
Yes. Exact model numbers provide the real dimensions and utility requirements needed for a reliable kitchen layout.
What is the biggest mistake when planning a cook line?
One of the biggest mistakes is trying to fit the maximum amount of equipment underneath the hood without considering workflow, hood coverage, utilities, and employee space.
Final Thoughts: Planning a Restaurant Cook Line Under a Hood
A well-designed restaurant cook line should help employees move efficiently from ingredients to cooking to finished food.
Start with the menu.
Then identify the exact cooking equipment required to produce it.
After that, compare the equipment with:
- Hood length
- Hood depth
- Hood coverage
- Fire suppression
- Gas capacity
- Electrical capacity
- Available floor space
Then think about how the cooks will actually work.
A strong cook line should provide:
- Efficient equipment order
- Nearby ingredients
- Landing space
- Enough room for employees
- Cleaning access
- Service access
The goal is not to fit as many appliances as possible under the hood.
The goal is to create a cook line that can handle your menu quickly and consistently during the busiest service periods.
Nishi Enterprise carries Commercial Cooking Equipment, including Commercial Ranges, Commercial Fryers, Stock Pot Ranges, Wok Ranges, and Commercial Tandoors.
Restaurants planning a new kitchen, remodeling an existing restaurant, or laying out a complete cook line can also learn more about Nishi Enterprise's Restaurant Design Consultation.
The simplest rule is this: plan the cook line around the menu and workflow first, then make sure the hood, utilities, fire suppression, and equipment dimensions all support that layout.

