Dukers DCGT48 48" Thermostatic Countertop Gas Griddle, 1" Steel Plate, 4 Burners, 104,000 BTU

Four thermostatic zones on one plate means four temperatures, all held steady while the line runs. The Dukers DCGT48 is a 48-inch countertop griddle for high-volume kitchens that cook a wide spread of menu items on the flat top at once.

Four 26,000 BTU/hr burners deliver 104,000 BTU/hr to a 1" polished steel plate with a 47-7/8" x 20-1/2" cooking area. The thermostats run from 250°F to 500°F, and the unit is 48" wide, 28-1/2" deep and about 349 lb.

What you will notice in day-to-day use

• Heavy plate, even results. 1" thick polished steel gives you the mass for consistent browning on pancakes, patties and grilled sandwiches alike.
• Consistency without babysitting. Thermostats on every 12" section hold the plate between 250°F and 500°F, so newer staff can turn out the same product as your best line cook.
• Quick to fire up. Standby pilots on each burner mean lighting up in the morning takes seconds.
• Cleanup that does not drag on. The full-length seamless drip pan pulls out and washes easily, and the stainless steel body wipes down at closing.
• Fits your setup. Adjustable stainless steel legs raise the griddle from 15-1/4" to 17-5/8", and the stainless steel body is easy to keep clean.

Choosing your setup

Gas type: choose natural gas or LP above to match your kitchen. Dukers ships each griddle set for natural gas and includes the LP conversion kit; per-gas values are below.

Specifications

Before it arrives

• Gas: 3/4" NPT inlet; a qualified installer should connect it and fit the LP kit if needed.
• Ventilation: install it under a commercial hood following your local code.
• Counter or stand: 48" wide and 28-1/2" deep, about 349 lb, so use a sturdy, non-combustible counter or stand and keep the clearances in the installation manual.

Warranty

1 year parts and labor from Dukers.

Specifications per Dukers data; subject to change by the manufacturer.