When purchasing commercial cooking equipment, restaurant owners often encounter two fuel options: natural gas and liquid propane. Whether you are shopping for a commercial range, deep fryer, griddle, charbroiler, or stock pot stove, choosing the correct gas type is an important part of ordering and installing the equipment.
Natural gas and propane are both commonly used in professional kitchens. Both can power high-output burners and provide the heat necessary for busy restaurant operations. However, they are not interchangeable fuels, and equipment designed for one gas type cannot automatically operate on the other.
So, what is the difference between natural gas and propane restaurant equipment? The primary differences involve how the fuel is supplied, its energy content, the pressure and burner configurations required, operating costs, and installation requirements. Natural gas is generally delivered through a utility pipeline, while propane is normally stored in tanks and delivered by a fuel supplier.
Understanding these differences is important because ordering a restaurant range with the wrong gas configuration can delay installation and potentially require an approved professional conversion or replacement of the equipment.
In this guide, we will compare natural gas and propane commercial cooking equipment, explain how BTU ratings and gas pressure work, discuss conversion requirements, and help restaurant owners determine which fuel is appropriate for their kitchens.
What Is Natural Gas Restaurant Equipment?
Natural gas restaurant equipment is commercial cooking equipment specifically configured to operate using natural gas, which consists primarily of methane.
Natural gas is commonly supplied through underground utility pipelines connected to a building. Restaurants with an established natural gas service can use that connection to supply compatible commercial kitchen equipment, provided the system has adequate capacity and is properly installed.
Natural gas is commonly used for:
- Commercial restaurant ranges
- Commercial griddles
- Commercial deep fryers
- Commercial charbroilers
- Commercial stock pot ranges
- Commercial gas convection ovens
- Other approved gas cooking equipment
For example, the Imperial IR-10-XB 60-Inch Commercial Restaurant Range is offered with natural gas or liquid propane selections.
Natural gas is a common choice for permanent restaurant locations where utility service is available. Since fuel is supplied continuously through the building's gas system, restaurant operators generally do not need to arrange periodic tank refills.
However, the availability of a natural gas connection does not guarantee that the existing piping, meter, or regulator can support additional commercial equipment. The entire system must be evaluated for the total connected gas load.
What Is Propane Restaurant Equipment?
Propane restaurant equipment is commercial cooking equipment designed or properly configured to operate using liquefied petroleum gas, commonly called LP gas or LPG.
Propane is stored as a liquid under pressure inside approved containers or bulk storage tanks. As the fuel is supplied to an appliance, it is converted to vapor and delivered through an appropriate gas regulation and piping system.
Propane is frequently used in restaurants and commercial kitchens where natural gas utility service is not available or practical.
Examples include:
- Restaurants in rural areas without natural gas service
- Approved food truck and mobile kitchen installations
- Outdoor catering operations
- Temporary foodservice facilities
- Commercial buildings supplied by bulk propane tanks
For example, the Dukers DCF4-LPG 50 lb Commercial Propane Fryer is specifically listed for liquid propane operation.
Propane can be a practical cooking fuel, but restaurants must plan for approved tank storage, adequate vaporization capacity, regulator requirements, deliveries, and applicable fire and building codes.
Portable propane cylinders should never be installed or stored indoors simply because a restaurant uses an indoor gas appliance. Cylinder location and storage arrangements must comply with applicable regulations.
Natural Gas vs. Propane: Key Differences for Restaurant Equipment
Both fuels can be suitable for commercial cooking. The right choice depends largely on the fuel supply available at the restaurant, the equipment configuration, and the requirements of the installation.
| Feature | Natural Gas | Propane (LP) |
|---|---|---|
| Typical fuel supply | Utility pipeline | Stored in cylinders or bulk tanks |
| Primary fuel component | Methane | Propane |
| Energy content | Approximately 1,036 BTU per cubic foot | Approximately 91,452 BTU per liquid gallon |
| Common appliance manifold pressure | Often around 4 inches water column | Often around 10 inches water column |
| Fuel delivery | Continuous utility supply | Scheduled delivery or approved cylinder replacement |
| Typical applications | Permanent commercial kitchens with utility service | Buildings without natural gas and approved mobile or outdoor installations |
| Operating cost | Depends on local utility rates | Depends on supplier pricing, deliveries, and tank arrangements |
| Gas conversion | Only when the manufacturer permits it and qualified personnel perform the approved procedure | |
The manifold pressures shown are common examples, not universal specifications. Always use the exact pressure and installation requirements stated on the appliance rating plate and in its manufacturer documentation.
Does Propane Burn Hotter Than Natural Gas?
One of the most common misconceptions about commercial gas equipment is that propane always produces more cooking heat than natural gas.
Propane does contain more energy per cubic foot than natural gas, but this does not automatically mean that a propane-configured restaurant range, griddle, or fryer has a higher BTU rating.
Commercial gas appliances are designed to deliver a specific rated heat input through their burners. Manufacturers account for fuel characteristics by using suitable burner orifices, gas pressures, and combustion settings.
For example, a commercial fryer may have a rated input of 120,000 BTU per hour in both natural gas and propane configurations.
The Dukers DCF4 Commercial Gas Fryer is listed with a total input of 120,000 BTU per hour for both gas configurations.
That means the propane version is not necessarily a more powerful fryer simply because propane has a higher energy content per unit of volume.
Cooking performance also depends on burner design, heat transfer efficiency, temperature controls, equipment condition, and the cooking application.
What Does BTU Mean on Commercial Cooking Equipment?
BTU stands for British Thermal Unit, a measure of energy. Commercial gas cooking equipment typically lists burner input in BTU per hour (BTU/hr).
For example, a restaurant range with six burners rated at 30,000 BTU/hr each has a combined open-burner input of 180,000 BTU/hr, excluding any additional oven or griddle burners.
A larger BTU rating indicates greater rated fuel energy input, but it does not by itself establish cooking efficiency or actual heat transferred into food.
When comparing equipment, restaurants should examine the complete specifications rather than assuming that higher BTU numbers always produce better results.
For additional information about high-output gas cooking equipment, read our guide on Stock Pot Ranges Explained: BTUs, Burners, and Uses.
Why Do Natural Gas and Propane Appliances Use Different Gas Pressures?
Natural gas and propane have different fuel characteristics, including heating value and combustion requirements.
To provide the intended burner input and safe combustion characteristics, commercial appliances are configured for the correct fuel.
Many commercial cooking appliances specify a natural gas manifold pressure near 4 inches water column and a propane manifold pressure near 10 inches water column.
These are commonly encountered values, not universal requirements. Inlet supply pressure is also different from manifold pressure, and manufacturers specify acceptable ranges for each.
Gas pressure is commonly measured in inches of water column, abbreviated as inches W.C.
The appliance's regulator, burner orifices, and other fuel-specific components must be compatible with the designated gas.
Incorrect gas pressure or configuration can cause poor combustion, improper flame characteristics, equipment damage, or dangerous operating conditions.
Restaurants should have gas pressure and piping requirements verified by qualified installation professionals before connecting new equipment.
Can You Convert Natural Gas Restaurant Equipment to Propane?
Sometimes, but only when the appliance manufacturer specifically permits the conversion.
Certain commercial gas ranges, fryers, griddles, and other appliances are offered in both natural gas and propane configurations. Some manufacturers provide approved conversion kits for specific models.
However, being available in both fuel configurations does not automatically mean that a particular unit can be converted after purchase.
An approved conversion may require changes to burner orifices, pilot components, gas regulators, identification labels, and other manufacturer-specified components.
The technician must also verify operating pressures, gas tightness, ignition, flame behavior, and combustion according to the manufacturer and applicable codes.
Restaurants should never attempt to convert gas equipment by simply attaching a different gas hose, changing a regulator setting without authorization, or connecting the appliance to a different fuel supply.
Conversions must be carried out by appropriately qualified personnel using the specific manufacturer's approved instructions and parts.
For example, Nishi Enterprise lists the Vulcan 948RX 48-Inch Gas Griddle with natural gas and liquid propane purchasing options. Buyers should select the correct gas configuration when ordering rather than assuming conversion will be possible later.
Is Natural Gas or Propane Cheaper for a Restaurant?
Natural gas is often economically attractive for restaurants with existing utility service, but operating costs depend on location, fuel prices, utility charges, and equipment consumption.
Propane pricing can vary based on delivery contracts, purchase volume, regional supply conditions, and storage arrangements.
Comparing the price of one gallon of propane with the price of one cubic foot of natural gas is not meaningful because the units contain different quantities of energy.
How to Compare Gas Costs Fairly
A more useful comparison is the cost per 100,000 BTU, commonly called one therm.
One therm equals 100,000 BTU.
For a simplified example, suppose a restaurant pays $1.50 per therm for natural gas and $2.50 per gallon for propane.
The natural gas energy cost would be $1.50 per therm.
Using approximately 91,452 BTU per gallon, the propane energy cost would be about $2.73 per therm.
These prices are hypothetical and are not current market quotations. Actual costs should include applicable delivery charges, utility fees, tank rental costs, and other contract expenses.
Restaurants should also compare the energy efficiency of the specific equipment being purchased. Fuel cost per therm and useful cooking heat delivered are not necessarily the same thing.
Which Gas Type Is Better for a Commercial Restaurant Range?
For most restaurant owners, the best starting point is the gas supply available at the business location.
If the building already has an adequately sized natural gas system, ordering a natural-gas-configured range may be the most straightforward option.
If the building is designed around an approved propane supply, the correct propane configuration is required.
Examples of gas ranges carried by Nishi Enterprise include:
- Imperial IR-10-XB 60-Inch Restaurant Range, offered with natural gas and LP selections
- American Range AR-36G-4B 60-Inch Gas Range, featuring four open burners and a 36-inch griddle
- Imperial IR-12 72-Inch Restaurant Range, intended for larger cooking lines
When comparing commercial restaurant ranges, consider burner configuration, oven type, dimensions, BTU input, ventilation requirements, and available gas infrastructure.
Our guide on how many burners a restaurant range needs explains how cooking volume and menu requirements influence range selection.
Natural Gas vs. Propane Commercial Deep Fryers
Commercial gas fryers may be offered in natural gas and propane configurations depending on the manufacturer and model.
In either configuration, burners supply heat to the frypot, allowing cooking oil to reach and maintain its target temperature.
Restaurants should not assume that a propane fryer heats oil faster simply because propane contains more energy per cubic foot.
Compare the burner's rated input, frypot design, oil capacity, recovery characteristics, and temperature controls.
For example, the Dukers DCF4 50 lb Gas Fryer is listed with both natural gas and propane configurations.
The Pitco SG14R-S Solstice Gas Fryer is another option offered with a choice of gas type.
Restaurants operating without utility natural gas may also consider specifically configured equipment such as the Dukers DCF4-LPG Commercial Propane Fryer, provided the installation is approved for the intended location.
Explore our commercial deep fryer collection to compare different models and capacities.
For additional operating guidance, see our article on how often a commercial deep fryer should be cleaned.
Do Commercial Griddles and Charbroilers Come in Both Gas Types?
Yes. Many commercial griddles and charbroilers are manufactured in natural gas and propane versions.
For example, the Imperial PSG48 48-Inch Professional Series Griddle is offered with natural gas and liquid propane selections.
The Vulcan VCCG24-IS 24-Inch Gas Griddle is another example of a model offered in both configurations.
Restaurants preparing burgers, breakfast foods, steaks, grilled chicken, kebabs, or other high-volume menu items should compare equipment based on cooking area, controls, burner arrangement, and installation requirements.
The fuel choice is only one part of purchasing a commercial griddle or commercial charbroiler.
Can Food Trucks Use Propane Restaurant Equipment?
Propane is commonly used in food trucks because it can be stored in an approved onboard fuel system without requiring a permanent natural gas utility connection.
However, not every propane appliance is suitable for installation in a food truck.
Mobile foodservice operations may be subject to specific requirements involving cylinder mounting, regulators, piping, ventilation, fire suppression, equipment restraint, and local permits.
Restaurant owners should verify that their equipment is suitable for mobile installation and that the entire fuel system complies with applicable rules.
A propane-configured commercial range or fryer should not be installed in a mobile kitchen without reviewing its listing and the vehicle's approved equipment design.
What Should You Check Before Buying Gas Restaurant Equipment?
Before purchasing a commercial gas appliance, verify the equipment specifications and existing kitchen infrastructure.
1. Confirm the Gas Type
Determine whether the restaurant uses natural gas or propane.
Do not rely on the appearance of existing gas connections or assume that every restaurant building uses natural gas.
2. Check the Total BTU Load
Each gas appliance has a rated input that contributes to the building's total connected gas demand.
A kitchen with a range, fryer, griddle, charbroiler, and stock pot stove may have a substantial combined load.
A qualified professional should confirm that the building's meter, piping, regulators, and fuel supply can meet the required demand.
3. Verify Gas Connector Requirements
Gas connectors must be properly selected for the appliance, fuel, movement requirements, and rated gas flow.
Nishi Enterprise carries commercial gas connectors and quick-disconnect assemblies for appropriate restaurant equipment applications.
For more information, read What Is a Gas Quick Disconnect on Restaurant Equipment?
4. Review Ventilation and Fire Suppression
Gas cooking equipment can create combustion products, heat, and cooking emissions that must be addressed by a properly designed ventilation system.
Many commercial cooking appliances require installation beneath a suitable commercial kitchen hood, with fire suppression where applicable.
The required system depends on the equipment, cooking process, manufacturer listing, and local codes.
Read our guides on whether every restaurant needs a commercial kitchen hood and planning a restaurant cook line beneath a hood.
5. Confirm Clearances and Installation Space
Commercial gas appliances may require minimum distances from combustible materials, adjacent equipment, walls, and other surfaces.
Review the appliance's installation manual and determine whether the proposed location provides sufficient working and service clearance.
Our article on how to know whether restaurant equipment will fit under your hood explains other important cook line measurements.
6. Arrange Qualified Installation
Gas piping, regulators, appliance connections, leak testing, and combustion adjustments should be handled by properly qualified professionals as required by local law.
Do not attempt to use mismatched connections, bypass safety devices, or operate equipment configured for the wrong gas type.
Is Propane Safer Than Natural Gas?
Both natural gas and propane can be used safely in properly designed and maintained commercial kitchen systems. Both are flammable fuels and require appropriate installation, ventilation, leak prevention, and operating procedures.
One important physical difference is how the gases behave when released.
Natural gas is generally lighter than air and may rise and disperse, depending on the surrounding conditions.
Propane vapor is heavier than air and may accumulate in low areas, including certain pits, depressions, or poorly ventilated spaces.
These differences affect how fuel systems, storage arrangements, and leak-protection measures are designed.
Neither fuel should be considered harmless simply because the equipment has been installed previously.
If a gas leak is suspected, stop using the affected equipment. Follow emergency procedures, evacuate the area when appropriate, avoid switches, flames, and other potential ignition sources, and contact emergency services or the gas supplier from a safe location.
Do not restart equipment until the system has been evaluated and declared safe by the appropriate professionals.
Frequently Asked Questions About Natural Gas and Propane Restaurant Equipment
Are Natural Gas and Propane Restaurant Appliances Interchangeable?
No. Commercial gas appliances must be configured for the correct fuel. Some models can be converted using approved manufacturer procedures, but conversion is not universally permitted.
Can You Connect a Propane Tank to a Natural Gas Restaurant Stove?
No. A natural-gas-configured appliance should not be connected directly to propane. Using the wrong fuel or gas pressure can create hazardous combustion and operating conditions.
Is Propane More Powerful Than Natural Gas?
Propane contains more energy per unit of volume, but a commercial appliance's rated BTU input depends on its design and gas configuration. Comparable natural gas and propane models may have the same rated heat input.
Is Natural Gas Cheaper Than Propane for Restaurants?
Natural gas may offer a lower operating cost where utility service is available, but the actual comparison depends on local prices, delivery arrangements, equipment efficiency, and infrastructure costs.
Do Restaurant Gas Ranges Come With Propane Conversion Kits?
Some do, while others are supplied in separate natural gas and propane configurations. Never assume that a conversion kit is included. Verify the exact model's specifications before purchasing.
Can Commercial Gas Fryers Run on Propane?
Yes. Many manufacturers offer propane-configured commercial gas fryers. The fryer must be properly specified and installed for LP operation.
Can You Convert Propane Restaurant Equipment Back to Natural Gas?
Some equipment may permit conversion in either direction, but only when the manufacturer authorizes it. Qualified personnel must use the approved parts and procedures for the specific model.
Does Propane Equipment Need a Different Regulator?
Natural gas and propane configurations commonly require different pressure settings and may require different regulator components. The correct configuration depends on the appliance's manufacturer specifications.
Does a Propane Restaurant Range Need a Hood?
Hood requirements depend primarily on the appliance, cooking process, emissions, and applicable codes rather than simply whether the fuel is propane or natural gas. Many commercial cooking applications require appropriate mechanical ventilation and fire suppression.
Which Gas Type Should I Choose for a New Restaurant?
Start by identifying the fuel service available at the property. Then confirm infrastructure capacity, installation costs, equipment availability, and local requirements before ordering any gas cooking equipment.
Shop Natural Gas and Propane Restaurant Equipment at Nishi Enterprise
Choosing between natural gas and propane restaurant equipment is primarily about selecting the correct equipment for your building's fuel supply and kitchen requirements.
Both fuels can support high-volume commercial cooking when appliances are properly specified, installed, and maintained. Neither is automatically the better option for every restaurant.
At Nishi Enterprise, we supply commercial cooking equipment for restaurants, diners, cafés, hotels, catering businesses, and other professional foodservice operations.
Our selection includes commercial gas ranges, deep fryers, commercial griddles, charbroilers, and stock pot stoves from manufacturers such as American Range, Imperial, Dukers, Vulcan, and other commercial equipment brands.
Whether you are opening a new restaurant or replacing older equipment, confirm your gas type and installation requirements before purchasing.
Explore our restaurant equipment selection online or visit Nishi Enterprise at 4455 S Clinton Ave, South Plainfield, NJ 07080, to discuss equipment options for your commercial kitchen.

