Skip to content

What Is a Double-Sided Commercial Griddle?

Speed and consistency are two of the most important considerations in a busy commercial kitchen. Restaurants that prepare hundreds of burgers, chicken sandwiches, grilled sandwiches, and other flat-top menu items every day need cooking equipment that can keep up with customer demand without sacrificing food quality.

While a traditional commercial griddle cooks food primarily from underneath, a double-sided commercial griddle applies heat from both above and below. This cooking method can reduce cooking times, minimize the need to flip certain foods, and help restaurants increase production within their available kitchen space.

Double-sided commercial griddles are also commonly known as clamshell grills, two-sided grills, or upper platen griddles. They are used in fast-food restaurants, burger shops, sandwich shops, cafeterias, hotels, and other commercial foodservice operations.

However, not all double-sided cooking equipment is designed for the same purpose. A heavy-duty commercial clamshell griddle used to prepare hamburger patties is different from a compact panini press used to toast sandwiches.

In this guide, we will explain what a double-sided commercial griddle is, how it works, its advantages and disadvantages, and how it compares with traditional flat-top griddles and commercial panini grills.

What Is a Double-Sided Commercial Griddle?

A double-sided commercial griddle is a cooking appliance designed to apply heat to both the upper and lower surfaces of food simultaneously.

The equipment typically consists of a lower heated cooking plate and a hinged or movable heated upper cooking plate, commonly called a platen.

During cooking, the upper platen is lowered over the food, allowing both heated surfaces to transfer energy into the product at the same time.

Unlike conventional flat-top cooking, where an employee may need to flip a burger patty or chicken breast to cook the opposite side, a double-sided griddle can cook both surfaces during the same cooking cycle when used according to an appropriate cooking procedure.

Commercial double-sided cooking equipment is available in several configurations:

  • Standalone commercial clamshell grills
  • Multi-platen high-volume cooking systems
  • Heated upper platen attachments for compatible commercial griddles
  • Countertop contact grills
  • Commercial panini and sandwich presses

At Nishi Enterprise, restaurants can explore traditional commercial flat-top griddles, compatible specialty cooking accessories, and commercial panini and sandwich grills designed for different types of foodservice applications.

Why Is a Double-Sided Griddle Called a Clamshell Grill?

The term clamshell grill describes the way the equipment opens and closes.

The upper platen is attached to a hinged, pivoting, or lifting mechanism that allows it to move above the lower cooking plate.

When the appliance is open, employees can load food onto the bottom cooking surface. When the upper platen is lowered, the two cooking surfaces surround the food in a configuration resembling a closed clamshell.

After the cooking cycle is complete, the upper platen is raised so the food can be removed.

Depending on the equipment, the upper platen may be operated manually or automatically.

Advanced commercial clamshell grills can include programmable lifting mechanisms, adjustable cooking gaps, timers, temperature controls, and stored cooking recipes.

How Does a Double-Sided Commercial Griddle Work?

A double-sided commercial griddle primarily cooks food through conductive heat transfer. Heat moves from the cooking plates into the food through direct contact or close proximity, depending on the appliance design and selected cooking gap.

The cooking process generally involves the following stages.

1. The Upper and Lower Cooking Plates Preheat

Before cooking begins, the equipment's heating systems bring the upper and lower plates to their intended operating temperatures.

Depending on the model, the lower cooking surface may use gas burners or electric heating elements. Upper platens commonly use electric heating elements.

Some advanced clamshell grills allow the upper and lower cooking temperatures to be adjusted independently.

This flexibility can be useful when different menu items require different heating conditions.

2. Food Is Placed on the Lower Cooking Surface

The operator places the food on the lower cooking plate according to the equipment manufacturer's loading instructions and the restaurant's established cooking procedure.

Commercial clamshell grills may be used to prepare suitable hamburger patties, boneless chicken portions, sandwiches, and other products.

Food thickness, starting temperature, portion size, and placement can influence cooking performance.

3. The Upper Platen Is Lowered

The heated upper platen is lowered over the food.

Depending on the model, the platen may rest against the product or stop at a predetermined position above the lower plate.

Commercial equipment with adjustable gap settings allows operators to establish an appropriate distance between the upper and lower cooking surfaces.

This can help accommodate different food thicknesses without unnecessarily compressing the product.

4. Heat Is Applied From Both Directions

While the lower cooking plate transfers heat into the bottom surface of the food, the upper platen supplies heat from above.

Because energy enters the food from two directions, suitable products may reach their required internal cooking temperature more quickly than when cooked on a conventional single-sided griddle.

The actual reduction in cooking time depends on the food, equipment, selected settings, and operating conditions.

5. The Cooking Cycle Is Completed

Once the cooking process is complete, the upper platen is raised and the operator removes the food.

Some advanced systems automatically raise the platen when a programmed cooking cycle ends.

Employees must still verify that food has reached the required internal temperature according to the restaurant's food-safety procedures.

A completed equipment timer does not independently establish that food is safe to serve.

What Is an Upper Platen on a Commercial Griddle?

An upper platen is the heated cooking surface positioned above the lower griddle plate.

It is the primary component that distinguishes a double-sided griddle from a conventional flat-top cooking appliance.

Depending on the equipment configuration, upper platens may feature:

  • Smooth metal cooking surfaces
  • Grooved cooking surfaces
  • Specialty composite cooking materials
  • Independent temperature controls
  • Manual lifting mechanisms
  • Automatic opening and closing mechanisms
  • Adjustable cooking-gap settings
  • Manufacturer-approved removable release sheets

For example, the Vulcan VMCS-201 Electric Clamshell Griddle Accessory is a heated grooved steel upper platen designed for use with compatible Vulcan commercial griddles.

The model is listed with a thermostatically controlled heating system, a 9/16-inch grooved steel plate, 3.6 kW of electrical input, and a 208V single-phase electrical configuration.

Rather than functioning as a complete standalone griddle, this accessory adds an upper heating surface to an appropriate lower griddle platform.

Restaurants considering this arrangement should verify base griddle compatibility, mounting requirements, electrical connections, and any additional accessories required for installation.

Double-Sided Commercial Griddle vs. Traditional Flat-Top Griddle

The main difference between these two types of equipment is the number of heated surfaces used during cooking.

A traditional commercial griddle provides a heated flat surface underneath the food. A double-sided griddle adds an upper heating surface that allows food to be cooked from both directions simultaneously.

Feature Traditional Commercial Griddle Double-Sided Commercial Griddle
Heating arrangement Primarily from underneath From above and below
Food flipping Frequently required May be unnecessary for suitable products
Cooking time Depends on food and heating capacity Potentially shorter for suitable products
Menu flexibility Excellent for a wide variety of flat-top cooking tasks Particularly useful for repeatable contact-cooking applications
Employee access Open cooking surface throughout operation Upper platen may cover food during cooking
Equipment complexity Generally simpler construction Additional heating and lifting components
Purchase cost Generally lower for comparable equipment Often higher because of additional equipment features
Best applications Breakfast foods, vegetables, burgers, sandwiches, mixed menus Standardized burgers, proteins, sandwiches, repetitive production

A conventional griddle remains extremely useful in restaurants that prepare many different foods and require continuous access to the cooking surface.

Examples include the Vulcan 924RX 24-Inch Thermostatic Gas Griddle and the Vulcan 948RX 48-Inch Thermostatic Gas Griddle.

These conventional flat-top appliances provide independently controlled heating sections and open cooking surfaces for general restaurant cooking.

A clamshell arrangement becomes especially attractive when the restaurant repeatedly prepares suitable food products and wants to reduce manual handling or cooking cycle times.

For additional guidance, read our article on What Size Commercial Griddle Does Your Restaurant Need?

Is a Double-Sided Commercial Griddle the Same as a Panini Press?

Although both appliances apply heat from above and below, a commercial clamshell griddle and a panini press are not necessarily the same type of equipment.

A commercial panini press is typically a compact countertop appliance designed to heat, toast, and press sandwiches and other suitable foods.

A heavy-duty commercial clamshell griddle is generally designed around broader cooking applications and higher-volume food production.

Feature Commercial Clamshell Griddle Commercial Panini Press
Primary applications Burgers, proteins, standardized commercial cooking Pressed sandwiches, paninis, wraps, toasted foods
Typical equipment size Larger cooking platforms or platen attachments Compact countertop appliances
Upper cooking surface Manual or automated heated platen Usually hinged heated plate
Gap control May offer adjustable or programmable cooking gaps Often uses a floating or manually adjusted upper plate
Cooking programs Advanced models may store multiple recipes Generally simpler temperature and timer controls
Heating configuration Electric or gas lower plate with electric upper heating, depending on model Commonly electric upper and lower heating
Typical business Quick-service restaurants and high-volume kitchens Cafés, delis, sandwich shops and concession stands

There is some overlap between these categories. Heavy-duty commercial contact grills may be suitable for more than sandwich preparation when the manufacturer approves the intended cooking application.

Restaurants looking primarily to prepare pressed sandwiches will generally find a dedicated commercial panini grill more practical than investing in a large clamshell cooking system.

What Are the Different Types of Double-Sided Commercial Cooking Equipment?

1. Standalone Commercial Clamshell Grills

A standalone commercial clamshell grill combines the lower cooking system and upper heating platens within a complete equipment platform.

These appliances are frequently used in quick-service and high-volume restaurant operations.

Advanced models may include multiple independently operated upper platens, programmable cooking cycles, automatic platen lifting, and recipe-specific gap settings.

This allows restaurants to establish repeatable equipment settings for approved menu items.

2. Upper Platen Attachments for Commercial Griddles

Some manufacturers offer heated upper platen attachments that can be mounted onto compatible conventional griddles.

These attachments allow restaurants to introduce two-sided cooking without necessarily replacing their entire cooking platform.

Depending on the configuration, employees may also retain access to uncovered sections of the lower griddle for traditional flat-top cooking.

The Vulcan VMCS-201 is an example of this equipment category.

Vulcan offers compatible mounting arrangements and optional gap-adjustment accessories for certain commercial griddle installations.

However, these attachments are not universal. Compatibility must be confirmed for the exact griddle, mounting system, electrical configuration, and intended operating conditions.

3. Smooth-Plate Commercial Contact Grills

Smooth-plate contact grills feature flat upper and lower cooking surfaces.

These appliances can be particularly useful for products that benefit from broad surface contact and even browning.

Examples available at Nishi Enterprise include:

Smooth cooking surfaces are particularly useful for grilled cheese sandwiches, toasted sandwiches, and other approved foods where grill markings are not necessary.

4. Grooved-Plate Commercial Contact Grills

Grooved contact grills feature raised ridges on one or both cooking surfaces.

These ridges can produce visible grill markings while providing a different contact arrangement from a completely flat plate.

Examples include the Eurodib SFE02345120 10 x 15-Inch Commercial Panini Grill and the Eurodib SFE02365240 10 x 20-Inch Commercial Panini Grill.

These models can be useful for cafés, sandwich shops, and restaurants that want distinctive grill markings on pressed menu items.

5. Combination Smooth and Grooved Contact Grills

Some commercial contact grills use a grooved upper plate and a smooth lower plate.

This arrangement combines grill markings on the upper surface with broad flat contact underneath the food.

Examples include the Waring WDG250 Combination Panini Grill and the Globe GPGS1410 Panini Grill.

This type of contact grill may be useful for restaurants that want to balance sandwich presentation with the cooking characteristics of a flat lower plate.

6. Dual-Head Commercial Sandwich Grills

Dual-head sandwich grills provide two side-by-side pressing sections, allowing employees to prepare multiple sandwiches or other suitable products independently.

For example, the Waring WPG300 Panini Ottimo Dual Panini Grill provides a 17 x 9.25-inch cooking surface with ribbed cast iron plates.

The Globe GPGDUE10 Bistro Series Double Sandwich Grill is another example designed for commercial sandwich production.

It is important to distinguish between double-sided cooking and a double-head grill. Double-sided describes heating from above and below, while double-head generally describes two independently accessible pressing sections positioned next to each other.

How Much Faster Is a Double-Sided Commercial Griddle?

A double-sided commercial griddle can cook suitable food products faster than a conventional single-sided griddle because heat enters the food from both directions simultaneously.

When cooking a burger on a traditional griddle, the lower plate primarily heats the side of the patty that is in contact with the cooking surface. The employee may need to turn the patty to expose the opposite side to direct heat.

With an appropriately configured double-sided griddle, the heated upper platen applies additional heat during the same cooking cycle.

Nevertheless, there is no universal percentage by which a double-sided griddle reduces cooking time.

Actual performance depends on:

  • Food thickness and portion weight
  • Starting food temperature
  • Upper and lower plate temperatures
  • Cooking-gap settings
  • Heating capacity
  • Plate material and construction
  • Contact between the food and cooking surfaces
  • Temperature recovery between batches
  • Required internal food temperature

Some manufacturers report significant cooking-time reductions for specific products and equipment configurations.

Those results should not be treated as guaranteed performance for every restaurant or menu item.

The best way to evaluate the potential production improvement is to test the equipment using the restaurant's actual food portions and approved cooking procedures.

Can a Double-Sided Griddle Increase Restaurant Production Capacity?

Yes. A major reason restaurants invest in double-sided cooking equipment is the potential to increase cooking capacity without substantially increasing the width of the cooking station.

Consider a hypothetical burger restaurant that can cook 12 patties simultaneously on its existing equipment.

If each batch occupies the griddle for six minutes, the theoretical production capacity is 120 patties per hour under continuous operation.

If a suitable double-sided griddle reduces that hypothetical cycle to four minutes while maintaining the required food quality and internal cooking temperature, theoretical production increases to 180 patties per hour.

Production Measurement Conventional Griddle Example Double-Sided Griddle Example
Patties per batch 12 12
Illustrative batch cycle 6 minutes 4 minutes
Theoretical batches per hour 10 15
Theoretical hourly production 120 patties 180 patties
Illustrative capacity increase Baseline 50%

Important: These figures are hypothetical planning examples, not manufacturer-tested equipment production ratings or recommended cooking times.

Actual restaurant production will generally be affected by loading and unloading time, temperature recovery, cleaning, employee efficiency, order patterns, food portion characteristics, and other kitchen bottlenecks.

The example demonstrates why reducing cooking cycle time can sometimes be more valuable than simply purchasing a wider cooking surface.

What Is Cooking Gap Adjustment on a Double-Sided Griddle?

Cooking gap refers to the distance between the upper platen and lower cooking plate during operation.

This is an important feature because different foods have different thicknesses and cooking requirements.

A thin burger patty, thick chicken breast, and assembled sandwich cannot necessarily be cooked using the same upper platen position.

When the cooking gap is too large, the upper platen may not provide sufficient contact or effective heating for the intended cooking program.

When the gap is too small, the platen may compress the product more than intended, affecting its shape, texture, or appearance.

Some commercial clamshell grills feature mechanical gap adjustments. More advanced equipment may automatically position the upper platen according to a stored cooking recipe.

Manufacturers such as Garland and Taylor offer commercial clamshell systems that can coordinate cooking time, plate temperatures, and platen position.

These features are particularly useful for restaurants that prepare standardized products with consistent portion dimensions.

However, food variations still need to be considered. A programmed gap setting developed for one product should not automatically be applied to a different product without verifying cooking results.

What Are the Benefits of a Double-Sided Commercial Griddle?

1. Potentially Faster Cooking Times

Applying heat to both sides of suitable food products can accelerate cooking compared with traditional single-sided heating under comparable conditions.

This can help restaurants complete customer orders more quickly during busy service periods.

2. Reduced Need to Flip Food

Traditional flat-top cooking often requires employees to turn food during the cooking process.

With an appropriately configured double-sided griddle, certain products can be cooked without manual flipping.

This may reduce employee handling and allow staff to perform other appropriate kitchen tasks during the cooking cycle.

3. More Repeatable Cooking Procedures

Double-sided griddles with programmable temperature, cooking time, and gap controls can help restaurants standardize equipment settings across employees and shifts.

This can be particularly valuable for restaurant chains that want customers to receive a similar product regardless of which location prepares it.

Consistent portioning and appropriate cooking-temperature verification remain essential.

4. Improved Production Within Limited Kitchen Space

Restaurants do not always have enough hood space to install a wider cooking appliance.

When two-sided cooking reduces the cycle time for appropriate products, the kitchen may be able to increase production without expanding the cooking surface by the same proportion.

This can be useful in compact quick-service kitchens and urban restaurants where every section of the cooking line matters.

5. Potential Labor Efficiency

Automated cooking cycles and reduced manual flipping may help simplify certain repetitive cooking tasks.

Employees can potentially spend less time continuously manipulating products on the cooking plate.

However, double-sided equipment does not eliminate the need for trained operators, supervision, cleaning, and food-safety verification.

6. Multiple Cooking Zones

Some larger clamshell systems include several upper platens and separately controlled lower heating zones.

This arrangement may allow restaurants to prepare different approved menu items or batches at the same time.

The specific degree of independent control depends on the design of the appliance.

What Are the Disadvantages of a Double-Sided Commercial Griddle?

1. Higher Initial Equipment Cost

Double-sided cooking equipment generally requires additional heating systems, upper cooking surfaces, lifting mechanisms, and temperature controls.

Advanced models may also include electronic controllers, motors, pneumatic components, and recipe programming capabilities.

These features can increase the purchase price compared with conventional commercial griddles.

Restaurants should evaluate whether their cooking volume and potential operational improvements justify the added investment.

2. Additional Cleaning Requirements

A double-sided griddle has both upper and lower cooking surfaces that require proper cleaning.

Food residue, grease, and cooking deposits can accumulate on either plate.

Depending on the design, employees may also need to maintain upper platen release sheets, hinges, grease collection systems, and other components.

3. More Specialized Maintenance

The upper heating system introduces additional components that may require inspection, adjustment, or professional repair.

Restaurants should consider manufacturer warranty coverage, replacement part availability, and qualified service support before purchasing equipment.

4. Not Every Food Benefits From Two-Sided Cooking

Some foods require open access to the cooking surface for stirring, spreading, shaping, chopping, or turning.

Pancakes, certain eggs, loose vegetables, thin batters, and other delicate or irregularly shaped foods may not be suitable for every upper platen configuration.

A traditional flat-top griddle may provide greater flexibility when a restaurant prepares a diverse menu requiring different cooking techniques.

5. Additional Installation Considerations

A double-sided griddle may require more vertical operating clearance than a conventional flat top because the upper platen must be raised and lowered.

Electrical requirements can also increase, especially when a gas-powered lower griddle is combined with electrically heated upper platens.

Restaurants should evaluate the complete installed equipment configuration before purchasing.

What Foods Can You Cook on a Double-Sided Commercial Griddle?

Double-sided griddles are particularly useful for foods with relatively consistent shapes and thicknesses that benefit from heat applied to both surfaces.

Food Product Potential Benefit Important Consideration
Hamburger patties Simultaneous heating from both sides Consistent patty thickness and verified internal temperature
Boneless chicken portions Additional heat transfer from above Appropriate cooking gap and safe internal temperature
Panini sandwiches Simultaneous toasting and filling heating Suitable pressure and filling quantity
Grilled cheese sandwiches Browning of both bread surfaces Avoid excessive compression
Quesadillas Potentially faster heating of both tortillas Suitable plate design and filling containment
Breakfast sandwiches Repeatable toasting and heating Different components may require separate cooking first
Selected steaks and proteins Two-sided surface heating Thickness, desired doneness and approved cooking procedure

Not every double-sided griddle or commercial contact grill is approved for all of these applications.

Restaurants should consult the specific manufacturer's instructions to confirm approved food types, loading limits, temperature settings, and cleaning procedures.

Are Double-Sided Griddles Good for Smash Burgers?

Double-sided commercial griddles can be useful for preparing certain burger products, especially when patty dimensions and cooking procedures are standardized.

However, traditional smash burger preparation involves pressing a portion of ground beef against a hot cooking surface to create a broad, thin patty with desirable surface browning.

A clamshell grill does not automatically perform this preparation technique.

Depending on the equipment, the upper platen may be designed to maintain a specified cooking gap rather than apply the pressure associated with manually smashing a burger.

Restaurants specializing in smash burgers should compare the resulting crust, texture, patty shape, cooking consistency, and production speed before replacing an existing flat-top station.

A heavy-duty conventional griddle may still be the preferred option when manual smashing and direct control are central to the restaurant's cooking method.

For example, Nishi Enterprise offers the Southbend HDG-36-M Heavy-Duty 36-Inch Manual Gas Griddle and the Vulcan VMG48 48-Inch Manual Gas Griddle for restaurants evaluating conventional flat-top cooking options.

Why Do Fast-Food Restaurants Use Clamshell Grills?

Quick-service restaurants often prepare large quantities of standardized food products within short service windows.

The same burger patty, chicken portion, or sandwich may be prepared hundreds of times throughout the day.

Commercial clamshell grills can support this type of operation by combining two-sided heating with standardized cooking procedures.

More advanced systems may allow restaurants to program individual settings for different menu items, including:

  • Upper cooking temperature
  • Lower cooking temperature
  • Cooking cycle duration
  • Upper platen position
  • Multiple cooking stages
  • Automatic platen opening

These functions can help reduce variation between cooking cycles when food portions and operating conditions are properly controlled.

For large restaurant chains, repeatability can be just as important as cooking speed.

However, a smaller independent restaurant with modest griddle demand may not benefit enough from advanced automation to justify the cost of a specialized clamshell cooking system.

Do Double-Sided Commercial Griddles Use Gas or Electricity?

Commercial double-sided cooking equipment is available in several energy configurations.

All-Electric Double-Sided Griddles

All-electric equipment uses electrical heating systems for both the upper and lower cooking surfaces.

This configuration is common among countertop contact grills, panini presses, and certain heavy-duty commercial clamshell systems.

Compact models may use a 120V electrical connection, while larger or higher-powered equipment may require 208V, 240V, or other electrical configurations.

Gas Lower Griddle With Electric Upper Platen

Some commercial clamshell systems combine a gas-heated lower cooking plate with electrically heated upper platens.

This arrangement may provide the heating characteristics of a gas griddle while adding electric heat from above.

The restaurant must therefore evaluate both gas and electrical infrastructure.

A gas lower cooking plate does not mean that the entire clamshell system can operate without electricity.

Restaurants can learn more about fuel selection in our article on What Is the Difference Between Natural Gas and Propane Restaurant Equipment?

For electrical connections, read our guide on What Is a NEMA Plug on Commercial Restaurant Equipment?

Are Double-Sided Griddles More Energy Efficient?

A double-sided griddle may improve energy efficiency for certain cooking applications, but it is not automatically more economical to operate than a conventional griddle.

Adding an upper heating surface increases the equipment's potential heating demand. However, a shorter cooking cycle may reduce the amount of operating time required to prepare a particular quantity of food.

Actual energy consumption depends on:

  • Upper and lower heating capacity
  • Cooking plate construction
  • Preheating requirements
  • Idle energy consumption
  • Cooking temperatures
  • Daily food production
  • Number of active heating zones
  • Temperature recovery performance
  • Employee operating habits

Some advanced clamshell systems feature independently controlled cooking sections that may allow unused zones to remain inactive during quieter periods.

Restaurants should compare equipment energy consumption alongside actual food production rather than relying exclusively on maximum electrical or gas input ratings.

The most useful operational comparison is how much energy the equipment requires to produce a given quantity of finished food under comparable conditions.

How Much Does a Double-Sided Commercial Griddle Cost?

The cost of double-sided commercial cooking equipment varies considerably depending on its size, construction, heating capacity, and level of automation.

A compact countertop panini press generally represents a much smaller equipment investment than an industrial-grade multi-platen clamshell grill.

Commercial upper platen attachments may also represent a substantial investment because they contain dedicated heating systems and specialized control components.

Important pricing factors include:

  • Cooking surface dimensions
  • Number of upper platens
  • Manual or automatic operation
  • Temperature control technology
  • Cooking-gap adjustment capabilities
  • Heating capacity
  • Plate material
  • Programmable cooking features
  • Mounting and installation accessories
  • Manufacturer warranty and service support

Restaurants considering a clamshell attachment should also determine whether the quoted price includes a compatible lower griddle and mounting components.

Compare the complete installed cost rather than the price of an individual attachment alone.

For current equipment pricing, browse our commercial griddle collection and commercial sandwich grill collection.

How Do You Determine Whether a Double-Sided Griddle Is Worth the Investment?

A double-sided griddle is most likely to provide financial benefits when it solves an identifiable production problem.

For example, a burger restaurant may regularly experience long order times because its conventional griddle cannot complete enough cooking cycles during peak demand.

Adding a suitable upper platen system could potentially increase production without requiring the restaurant to dedicate substantially more space to its cooking line.

Before purchasing, evaluate the following questions:

  1. How many portions currently pass through the griddle station during peak hours?
  2. Which food items are suitable for two-sided cooking?
  3. How much time do employees currently spend flipping and monitoring those items?
  4. Can a shorter cooking cycle increase the number of completed customer orders?
  5. Will other kitchen stations be able to handle the increased production?
  6. How much will the new equipment cost to purchase, install, operate, and maintain?
  7. Can the restaurant maintain its desired food quality using the proposed equipment?

Restaurants with high production volumes and repetitive cooking procedures may find the investment more attractive than businesses that only use their griddles occasionally.

A conventional commercial griddle or a dedicated contact grill may provide better value for operations with more modest requirements.

What Size Double-Sided Commercial Griddle Does Your Restaurant Need?

Equipment sizing should account for both the lower cooking area and the portion of that area served by the heated upper platens.

A 48-inch conventional griddle fitted with one relatively narrow upper platen does not provide 48 inches of two-sided cooking capacity.

Only the area covered by the functioning upper platen can be used for that particular two-sided cooking arrangement.

Restaurants should compare:

  • Total lower cooking surface dimensions
  • Upper platen width and depth
  • Number of independently operated platens
  • Maximum approved food thickness
  • Simultaneous portion capacity
  • Expected cooking cycle times
  • Heat recovery under repeated loading
  • Available conventional cooking space when platens are raised

Compact contact grills may be sufficient for sandwich stations, while restaurants preparing large quantities of burgers may need a wider, multi-platen platform.

For example, the Globe GSG1410 provides a 14 x 10-inch smooth cooking surface, making it a different category of equipment from a large commercial clamshell griddle.

Read our detailed commercial griddle sizing guide for additional information about estimating cooking capacity and selecting suitable dimensions.

Commercial Double-Sided Cooking Equipment Compared

The following products available from Nishi Enterprise illustrate different approaches to two-sided commercial cooking.

Model Cooking Surface Electrical Configuration Equipment Type
Vulcan VMCS-201 Grooved steel upper platen 208V, single-phase Clamshell griddle attachment
Waring WFG150 9.75 x 9.25-inch smooth plates 120V Compact flat contact grill
Globe GSG1410 14 x 10-inch smooth plates 120V Mid-size contact grill
Waring WFG275TX 14 x 14-inch smooth plates 120V Flat sandwich grill with timer
Waring WDG250 14.5 x 11-inch ribbed top and flat bottom 120V Combination contact grill
Eurodib SFE02365240 10 x 20-inch ribbed plates 240V Wide-format panini grill
Waring WPG300 17 x 9.25-inch ribbed cooking surface 240V Dual-head panini grill

These products are not direct substitutes for one another. A heated platen accessory requires a compatible base griddle, while the countertop contact grills are complete appliances intended for their respective approved applications.

Always verify current manufacturer specifications, equipment configuration, installation requirements, and suitability for your intended menu before purchasing.

Do Double-Sided Commercial Griddles Require an Exhaust Hood?

Many commercial double-sided griddles and contact grills require appropriate mechanical ventilation, depending on their cooking applications and equipment listings.

Cooking raw proteins, fatty meats, and other products at high temperatures can generate grease-laden vapors, smoke, heat, and other emissions.

The presence of an upper platen does not eliminate these emissions or automatically remove the need for an exhaust hood.

Likewise, an electrically powered double-sided griddle is not automatically exempt from commercial kitchen ventilation requirements.

Important installation considerations include:

  • Equipment listing and manufacturer instructions
  • Type of food being prepared
  • Applicable cooking duty classification
  • Exhaust hood design and coverage
  • Fire-suppression requirements
  • Vertical clearance when the upper platen is raised
  • Electrical and gas infrastructure
  • Local mechanical, building, and fire codes

Restaurants replacing an existing conventional griddle with a clamshell system should have the revised cooking station evaluated before installation.

For additional information, read our guides on Type I vs. Type II Commercial Kitchen Hoods and How Do You Know if Restaurant Equipment Will Fit Under Your Hood?

Can You Install a Double-Sided Griddle on a Chef Base Refrigerator?

A commercial chef base refrigerator provides refrigerated ingredient storage beneath compatible countertop cooking equipment.

This arrangement can be useful in burger restaurants and other operations that need convenient access to refrigerated ingredients.

However, double-sided griddles may introduce additional weight, heat exposure, electrical connections, and mechanical forces from the upper platen assembly.

Before selecting a chef base for this type of cooking equipment, confirm:

  • Combined equipment weight
  • Chef base maximum load rating
  • Lower griddle footprint and support points
  • Upper platen mounting requirements
  • Heat protection and required appliance clearances
  • Combined working height
  • Equipment stability during platen operation

Compatibility should be established through the relevant manufacturers and installation professionals.

Read our guide on What Is a Commercial Chef Base Refrigerator? to learn more about this cooking station configuration.

How Do You Clean a Double-Sided Commercial Griddle?

Proper cleaning is especially important because both heated surfaces may come into contact with food.

Cleaning procedures depend on the manufacturer, cooking plate material, and equipment configuration.

Clean the Lower Cooking Surface

Remove food residue, grease, and accumulated cooking deposits using tools and cleaning methods approved for the lower plate material.

Conventional steel, chrome, grooved cast iron, and specialty composite cooking surfaces may require different procedures.

Clean the Upper Platen

The upper cooking surface must also be maintained to prevent food residue and grease from accumulating.

Follow the manufacturer's instructions regarding safe platen positioning, cleaning temperature, approved tools, and power-isolation procedures.

Never reach beneath an unsupported upper platen or interfere with automatic lifting mechanisms.

Inspect Release Sheets When Applicable

Certain commercial clamshell grills use manufacturer-approved release material on the upper cooking surface.

These sheets can help prevent food from sticking and simplify certain cleaning procedures.

They are specialized equipment accessories and should not be replaced with ordinary plastic sheets, household wraps, or materials that are not approved for the appliance.

Inspect and replace release materials according to the manufacturer's instructions.

Empty and Clean Grease Collection Components

Grease troughs, collection trays, splash guards, and related components should be cleaned according to the restaurant's maintenance program.

Accumulated grease can create sanitation and fire-safety concerns.

Inspect Moving Components and Controls

Check accessible hinges, handles, lifting mechanisms, and control surfaces for visible damage or unusual operating behavior.

Repairs involving electrical heating components, automated mechanisms, gas systems, or internal controls should be performed by qualified service personnel.

Food Safety When Using a Double-Sided Commercial Griddle

Although cooking food from both sides can improve heat transfer, the restaurant must still ensure that every product reaches the applicable safe internal cooking temperature.

The appearance of the food's exterior is not a reliable substitute for internal temperature verification.

For example, a hamburger patty may develop surface browning before its center has reached the required temperature.

Under the FDA Food Code's general foodservice cooking requirements, examples include:

Food Category Example Minimum Internal Cooking Requirement
Ground beef and other applicable nonintact meats 155°F for 17 seconds, or an approved equivalent time-temperature combination
Poultry 165°F instantaneous

These examples are based on the FDA Food Code's standard retail foodservice provisions. Exceptions, alternative procedures, and locally adopted requirements may apply.

Restaurants should establish cooking procedures using actual food temperature measurements, appropriate portion specifications, and the equipment manufacturer's instructions.

Programmable cooking cycles are useful for repeatability, but they should be validated for each intended food product.

Employees should also prevent cross-contamination between raw and ready-to-eat foods and clean food-contact surfaces as required by the restaurant's sanitation program.

Read the FDA Food Code for additional information about retail foodservice cooking and sanitation requirements.

What Should You Look for When Buying a Double-Sided Commercial Griddle?

1. Intended Cooking Application

Determine whether your primary goal is to prepare hamburgers, boneless proteins, pressed sandwiches, or other menu items.

A compact contact grill and a high-volume clamshell system serve different production requirements.

2. Upper and Lower Cooking Surface Materials

Compare smooth, grooved, steel, cast iron, chrome, and specialty cooking surface options.

The appropriate material depends on your menu, desired browning characteristics, cleaning procedures, and equipment design.

3. Temperature Control

Determine whether the appliance allows independent adjustment of the upper and lower cooking temperatures.

Temperature regulation and recovery performance can substantially influence cooking consistency.

For more information about commercial griddle controls, read Manual vs. Thermostatic Commercial Griddles: What's the Difference?

4. Cooking-Gap Adjustment

Check the available platen height or gap adjustment features.

The equipment should accommodate the actual thickness and dimensions of the products your restaurant prepares.

5. Manual or Automatic Platen Operation

A manually operated upper platen may be sufficient for smaller restaurants and simple production procedures.

Automatic lifting, programmable cycles, and additional controls may be valuable in high-volume kitchens with repetitive cooking requirements.

6. Gas and Electrical Requirements

Verify voltage, phase, amperage, connection method, gas type, and available utility capacity.

Do not assume that a commercial contact grill or platen attachment can operate from an ordinary electrical outlet.

7. Equipment Compatibility

If purchasing an upper platen attachment, confirm that it is approved for the exact lower griddle model.

Determine whether mounting hardware, support frames, electrical work, or additional accessories are required.

8. Cleaning and Maintenance Requirements

Review the recommended cleaning procedures for both cooking surfaces.

Consider the availability and cost of replacement release sheets, specialized cleaning tools, and service components when applicable.

9. Production Performance

Compare the equipment's actual cooking performance using your restaurant's intended menu items whenever possible.

Evaluate cooking cycle times, heat recovery, internal food temperatures, product appearance, employee handling requirements, and final food quality.

Frequently Asked Questions About Double-Sided Commercial Griddles

What Is Another Name for a Double-Sided Commercial Griddle?

Double-sided commercial griddles are commonly called clamshell grills, two-sided grills, upper platen griddles, or commercial contact grills. The exact terminology depends on the equipment configuration and intended application.

Do Double-Sided Griddles Cook Both Sides at the Same Time?

Yes. They use a heated lower cooking plate and a heated upper platen to apply heat from both directions during the same cooking cycle.

Do You Need to Flip Burgers on a Clamshell Grill?

Some commercial clamshell cooking procedures allow burger patties to be cooked without manual flipping. The appropriate process depends on the equipment, product thickness, selected settings, and validated cooking requirements.

Can a Double-Sided Griddle Cook Food Twice as Fast?

Potentially for certain products and equipment configurations, but a 50 percent reduction in cooking time is not guaranteed. Actual results depend on heating capacity, plate temperatures, food thickness, cooking gap, and other operating conditions.

Is a Panini Press Considered a Double-Sided Grill?

Yes. A conventional heated panini press is a type of two-sided contact grill. However, it generally serves different production requirements from a heavy-duty commercial clamshell griddle.

Can You Add an Upper Platen to an Existing Commercial Griddle?

Some manufacturers offer compatible upper platen attachments. For example, Vulcan offers the VMCS-201 clamshell griddle accessory. Compatibility and installation requirements must be verified before purchasing.

Can a Double-Sided Griddle Be Used as a Regular Flat Top?

Many clamshell cooking systems allow conventional flat-top cooking when the upper platen is raised or when an uncovered cooking zone is available. However, permitted operating modes vary by appliance.

Are Double-Sided Griddles Good for Breakfast Restaurants?

They can be useful for selected breakfast sandwiches, proteins, and suitable toasted products. A conventional flat-top griddle may offer greater flexibility for pancakes, eggs, hash browns, and foods requiring continuous access to the cooking surface.

Do Double-Sided Griddles Produce Grill Marks?

Models with grooved cooking surfaces can produce grill markings on appropriate foods. Smooth cooking plates generally produce broad surface browning rather than raised grill patterns.

Can a Double-Sided Griddle Replace a Charbroiler?

Not necessarily. A double-sided griddle cooks primarily through contact with heated surfaces, while a charbroiler uses open cooking grates and a different heat-transfer arrangement. The two appliances produce different cooking characteristics.

Read our guide on Charbroiler vs. Griddle: Which Is Better for Your Menu? for a more detailed comparison.

Do Double-Sided Commercial Griddles Need Special Cleaning?

They require cleaning of both upper and lower cooking surfaces, along with applicable grease collection components and approved release materials. Always follow the manufacturer's equipment-specific instructions.

Are Double-Sided Griddles Worth Buying for a Small Restaurant?

They can be worthwhile when the restaurant regularly prepares suitable foods and needs faster or more repeatable cooking procedures. Smaller businesses with limited production requirements may find a conventional griddle or countertop contact grill more economical.

Shop Commercial Griddles and Contact Grills at Nishi Enterprise

A double-sided commercial griddle can be a valuable investment for restaurants that need to improve cooking speed, standardize repetitive production, and increase the output of an existing cooking station.

However, the best equipment depends on the restaurant's menu, food thickness, production volume, available kitchen space, utility infrastructure, and budget.

High-volume burger restaurants may benefit from specialized clamshell cooking systems or compatible upper platen attachments. Cafés, delis, and sandwich shops may find dedicated commercial contact grills more practical.

At Nishi Enterprise, we supply commercial cooking equipment for restaurants, diners, cafés, hotels, catering businesses, and professional foodservice operations.

Explore our equipment collections:

Whether you are opening a burger restaurant, expanding your sandwich menu, upgrading an existing griddle station, or designing a new commercial kitchen, our team can help you compare available cooking equipment options.

Shop Commercial Griddles at Nishi Enterprise or Browse Commercial Panini and Contact Grills to find equipment suited to your restaurant's cooking requirements.

You can also visit our South Plainfield showroom at 4455 S Clinton Ave, South Plainfield, NJ 07080, to discuss your commercial kitchen equipment needs.

Previous Post Next Post