Univex SFG500TM Reversible Dough Sheeter, Floor Model, 19.75" Belt, 47" Tables

The Univex SFG500TM is the long-table version of the 19.75" sheeter: the same belt width and 3/4 hp chain drive as the SFG500T, carried on 47" tables instead of 28", with a 46.5" carpet. It weighs 485 lbs. and folds down to 43.375" long and 75.625" tall.

Why table length, not belt width, is the real variable

Every sheeter in this range reduces dough to the same 1.9" maximum through the same chrome cylinders. What separates the models is how much sheet they can hold on the way out, and that is a table question. Nineteen extra inches per side over the SFG500T is room for a longer billet to lie flat instead of draping off the end — and dough that drapes stretches unevenly, which shows up later as a sheet that bakes thick at one end.

It is also room for the operator to work. On a long lamination the sheet has to be folded, turned and fed back repeatedly; tables that support the whole piece let that happen on the machine rather than on a nearby bench.

The dimensions Univex resolves for this model and no other

An unusual advantage of the SFG500TM: it is the one model on Univex’s shared 500-series sheet whose secondary dimension row reads cleanly. Univex publishes a 46.5" (118.1 cm) carpet length, a 43.375" (110.2 cm) folded length and a 75.625" (192.3 cm) folded height for this machine specifically. For the SFG500T beside it, those same figures cannot be attributed with confidence — so if a folded dimension decides whether a machine fits through your door, this is the model in the 19.75" group whose numbers are published.

Why Operators Choose It

• 47" tables. Nineteen inches more per side than the SFG500T, on the same 19.75" belt.
• 46.5" carpet. Published for this model specifically.
• Folded dimensions you can plan to. 43.375" long by 75.625" tall, both published.
• Same drive, more machine. 3/4 hp chain drive and hard chrome cylinders, as on the shorter floor model.
• Four voltage builds. 220 V three phase standard, plus 220/60/1, 400/60/1 and 400/60/3.
• Guard interlocks and an emergency stop. The documented safety set across the floor-model range.

Controls

Main power switch, emergency stop switch, a direction control lever and a foot pedal for forward and reverse table travel.

The cylinders are separated by hand to set the sheet thickness.

Ideal For

Wholesale and retail bakeries laminating daily, croissant and puff production, pizzerias working long billets, and kitchens that have found a 28" table too short for the sheet they actually make.

Specifications

Electrical Supply

Built as standard for 220 V three phase at 2.60–7.35 A on NEMA L-15-20, with 220/60/1, 400/60/1 and 400/60/3 available to order. Univex’s web page for this model prints 208-240/60/3 against the sheet’s 220 V; the figure above is the sheet’s. Confirm your supply before the order goes in, because the machine is wired once, at the factory.

Siting

A lighted, airy room and a level, compact support, with the machine operated between 41°F and 104°F and humidity held to 50% at 68°F or 90% at 104°F. Univex publishes no clearance figures, so plan the footprint from the tables-down depth of 55.9".

Accessories

Both accessory fields on the shared 500-series sheet are blank, which means Univex publishes no crate list for this machine. We have not filled the gap with a guess. The one named factory option across the sheeter line is a prison package.

Certification

There is no NSF, UL, cETLus, ETL or CSA listing published for this machine or for any Univex sheeter. Nothing in the specification sheet, the product page or the operator manual carries a mark, so this listing carries none either.

Factory Options and Accessories (Additional Cost)

• Prison package, factory installed
• Optional 220/60/1, 400/60/1 and 400/60/3 configurations

Warranty

One year, on-site parts and labor.

Specifications per Univex data; subject to change by the manufacturer.