True TSSU-60-16D-2-HC~SPEC3 Sandwich/Salad Prep Table with Drawers with SPEC3 Package, 60-3/8" Wide, 16 Pans

The True TSSU-60-16D-2-HC~SPEC3 is a sandwich/salad prep table with drawers with SPEC3 package from the TSSU Series. It keeps 16 sixth-size food pans cold in the top rail above a refrigerated base with one solid door and two drawers, holds 33°F to 41°F and runs on R290 hydrocarbon refrigerant. It plugs into a 115/60/1 outlet (6.5 A).

Refrigeration System

A factory-balanced, self-contained capillary tube refrigeration system holds 33°F to 41°F in the food pans and in the cabinet below. R290 is a natural hydrocarbon refrigerant with zero ozone depletion potential and a very low global warming potential.

True's forced-air design moves cold air around the food pans as well as through the cabinet, in line with NSF/ANSI 7. The evaporator coil is epoxy coated to resist corrosion. The condensing unit slides out from the back of the cabinet for cleaning and service. The compressor is rated at 1/3 HP.

Why Operators Choose It

• Pans included: Ships with 16 clear polycarbonate sixth-size food pans; the opening also accepts other pan sizes with optional divider bars.
• Insulated lid and hood: Foam-insulated stainless steel lid and hood hold pan temperatures, limit condensation and lift off for cleaning.
• Full-length cutting board: Removable 11-3/4" deep high-density polyethylene board gives a sanitary prep surface across the full width.
• SPEC3 package: Built to True's SPEC3 specification with a stainless steel interior liner, a stainless steel back and all-metal work-spec handles.
• Natural refrigerant: R290 hydrocarbon refrigerant with zero ozone depletion potential and very low global warming potential.
• Self-closing door with stay-open: The door closes itself for a positive seal yet holds open at 90° for loading.
• Epoxy-coated evaporator: Coating protects the coil against corrosion.
• Foamed-in-place insulation: High-density polyurethane insulation with zero ODP and zero GWP.
• Tool-free gaskets: One-piece magnetic gaskets pull out without tools for cleaning.
• NSF/ANSI 7: Compliant for open food product.

Prep Top & Pans

The top holds 16 sixth-size, 4" deep clear polycarbonate food pans (included) and also accepts 6" deep pans supplied by others. The pan opening takes other pan sizes with available divider bars. An insulated stainless steel lid and hood cover the pans and lift off for cleaning. An 11-3/4" deep removable white polyethylene cutting board runs the full length of the unit.

Cabinet, Door & Drawer Construction

Exterior: stainless steel front, top, sides, and back. Interior: stainless steel liner. Stainless steel floor with coved corners. The cabinet is foamed in place with high-density polyurethane insulation. Door: doors have stainless steel exterior with stainless steel liner. Drawers have stainless steel exterior facings and liners with stainless steel frames. Drawers ride on heavy-duty stainless steel slides and rollers; each drawer accommodates (1) 12"L x 20"W x 6"D food pan (pans sold separately).

Shelving

Two adjustable PVC-coated wire shelves measuring 27-1/2"W x 16"D. Shelves adjust in 1/2" increments.

Ideal For

Sandwich shops, delis, pizzerias, salad bars and fast-casual lines that assemble to order from cold ingredients.

Available Configurations

Door and drawer sections can be arranged in any position; tell us the layout you need when you order.

Specifications

Installation & Utility Requirements

Requires a dedicated 115/60/1, 15 amp outlet; the unit ships pre-wired with a cord and NEMA 5-15P plug. Listed depth does not include 1" for rear bumpers. Listed height does not include 6-1/4" for castors or 6" for optional legs. Follow True's installation manual for clearances, leveling and start-up.

Factory Options (Additional Cost)

• 6" (153 mm) standard legs
• 6" (153 mm) seismic/flanged legs
• 2-1/2" (64 mm) diameter castors
• Barrel lock available for door section (factory installed)
• Additional shelves
• Single overshelf
• Double overshelf
• Flat lids
• Sneezeguard
• Cutting boards provided by others. Requires "L" brackets. Field installed brackets provided by True (contact factory)
• 11-3/4" (299 mm) deep, 1/2" (13 mm) thick, composite cutting board. Requires "L" brackets
• Crumb catcher. Requires crumb catcher cutting board for proper installation
• Pan dividers
• Exterior rectangular digital temperature display (factory installed)
• ADA compliant model with 34" (864 mm) work surface height
• Heavy-duty 16-gauge top

Warranty

7-year parts & labor; 7-year compressor coverage from True Manufacturing.

Download the True TSSU-60-16D-2-HC~SPEC3 spec sheet (PDF)

Specifications per True Manufacturing data; subject to change by the manufacturer.