True TPP-AT-60-HC~SPEC3 Solid Door Pizza Prep Table with Angled Top with SPEC3 Package, 60-1/4" Wide

The True TPP-AT-60-HC~SPEC3 is a solid door pizza prep table with angled top with SPEC3 package from the TPP Series. It keeps food pans cold in the top rail above a refrigerated base with two solid doors, holds 33°F to 41°F and runs on R290 hydrocarbon refrigerant. It plugs into a 115/60/1 outlet (3.9 A).

Refrigeration System

A factory-balanced, self-contained capillary tube refrigeration system holds 33°F to 41°F in the food pans and in the cabinet below. True sizes the system generously for the cabinet, which helps it recover after door openings. R290 is a natural hydrocarbon refrigerant with zero ozone depletion potential and a very low global warming potential.

True's forced-air design moves cold air around the food pans as well as through the cabinet, in line with NSF/ANSI 7. The evaporator coil is epoxy coated to resist corrosion. The condensing unit slides out from the front of the cabinet for cleaning and service. The compressor is rated at 1/4 HP.

Why Operators Choose It

• Angled pan rail: The top is pitched 13° toward the operator.
• Insulated lids: Foam-insulated stainless steel lids hold pan temperatures and limit condensation.
• Full-length cutting board: Removable 19-1/2" deep high-density polyethylene board gives a sanitary prep surface across the full width.
• SPEC3 package: Built to True's SPEC3 specification with a stainless steel interior liner, a stainless steel back, all-metal work-spec handles and factory-fitted locks.
• Natural refrigerant: R290 hydrocarbon refrigerant with zero ozone depletion potential and very low global warming potential.
• Lifetime-guaranteed hardware: True backs the door handles on this cabinet with a lifetime guarantee.
• Exterior temperature display: Check cabinet temperature at a glance from outside the cabinet.
• Epoxy-coated evaporator: Coating protects the coil against corrosion.
• Foamed-in-place insulation: High-density polyurethane insulation with zero ODP and zero GWP.
• Tool-free gaskets: One-piece magnetic gaskets pull out without tools for cleaning.
• NSF/ANSI 7: Compliant for open food product.

Prep Top & Pans

Foam-insulated stainless steel lids cover the pans. A 19-1/2" deep removable white polyethylene cutting board runs the full length of the unit.

Cabinet & Door Construction

Exterior: stainless steel front, top, sides, and back. Interior: stainless steel liner. Stainless steel floor with coved corners. The cabinet is foamed in place with high-density polyurethane insulation. Doors: stainless steel exterior with clear aluminum liner.

Shelving

Four adjustable PVC-coated wire shelves in two sizes (23-5/8"W x 28"D and 17-1/4"W x 28"D). Shelves adjust in 1/2" increments.

Ideal For

Pizzerias and Italian kitchens that top pies to order and need chilled toppings and a deep cutting board at the same station.

Specifications

Installation & Utility Requirements

Requires a dedicated 115/60/1, 15 amp outlet; the unit ships pre-wired with a cord and NEMA 5-15P plug. The front-breathing design suits built-in installations. Listed depth does not include 1" for rear bumpers and 1-3/4" for cutting board. Listed height does not include 5-3/4" for castors or 6" for optional legs. Follow True's installation manual for clearances, leveling and start-up.

Factory Options (Additional Cost)

• 220-240V/50-60Hz
• 208-230V/60Hz
• 6" (153 mm) standard legs
• 6" (153 mm) seismic/flanged legs
• 4" (102 mm) diameter castors
• 3" (85 mm) diameter castors
• 2-1/2" (64 mm) diameter castors
• Barrel locks (factory installed). Requires one per door
• Garnish rack
• Single overshelf
• Double overshelf
• Half bun tray rack (excludes left door). Holds up to eleven 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately)
• Cutting boards provided by others. Requires "L" brackets. Field installed brackets provided by True (contact factory)
• Half bun tray racks (excludes left door). Holds up to eleven 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately)

Warranty

7-year parts & labor; 7-year compressor coverage from True Manufacturing.

Download the True TPP-AT-60-HC~SPEC3 spec sheet (PDF)

Specifications per True Manufacturing data; subject to change by the manufacturer.