Not every pan in your kitchen is a full-size rectangle. The Toastmaster 3A20AT09 is a single-drawer built-in warmer sized for a 16" x 16" pan, a squarer footprint that suits cabinets and counter runs where a long 20-inch drawer will not fit. It is a tidy way for cafés, steakhouses and buffet lines to keep baked potatoes, rolls or vegetables hot and ready right where they are plated.
The drawer holds a 16" x 16" pan 5" deep and is furnished with a removable deep-drawn stainless steel pan. The hydraulic thermostat adjusts from 100°F to 200°F with an OFF position, and a moist/crisp knob sets the humidity. It runs on 120V, 450 W and 3.91 A.
What you will notice in day-to-day use
- Right-sized drawer. The 16" x 16" pan format makes the most of a squarer cabinet opening.
- Texture under control. The moist/crisp adjustment keeps rolls from going stale and fried items from going soggy.
- Safe holding, verified. A thermometer reads the coolest point inside, and the "safety zone" green on the dial shows where to set it.
- Smooth and secure. Third-member rails with 20 bearings and a positive-action spring-loaded latch keep the drawer gliding and closed.
- Efficient and neat. Six-side insulation keeps heat in the drawer, and integrated trim finishes the installation; wood fixtures are acceptable.
Specifications
| Brand | Toastmaster |
| Model | 3A20AT09 |
| Type | Built-in electric drawer warmer, 1 drawer |
| Pan capacity | 1 x 16" x 16" x 5" deep pan (removable stainless pan furnished) |
| Controls | Hydraulic thermostat, 100°F – 200°F with OFF position, signal light, knob guard, "safety zone" green marking, moist/crisp control |
| Thermostats | 1 |
| Heating | Tubular heating elements |
| Drawer | Positive-action spring-loaded latch, third-member suspension rails with 20 bearings per drawer |
| Construction | Stainless steel exterior and drawer fronts, aluminized steel inner lining, welded and reinforced sheet steel frame; insulated on all six sides |
| Electrical | 120V, single phase, 450 W, 3.91 A, field wired |
| Dimensions (W x D x H) | 23-1/16" x 23" x 12-1/8" |
| Approx. shipping weight | 82 lb |
| Certifications | cETLus, ETL Sanitation, Made in USA |
Before it arrives
- Power: field wired to a dedicated 120V circuit; have an electrician make the connection.
- Cut-out: plan the cabinet opening for a 23-1/16" W x 23" D x 12-1/8" H unit.
- Manual: follow the owner’s manual for installation details.
Warranty
1 year parts and labor from Toastmaster.
Specifications per Toastmaster data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

