Serv-Ware SHPS-12 12" Countertop Hot Plate with 2 Burners, 25,000 BTU Each, Cast Iron Grates
Sometimes you just need two more burners. The Serv-Ware SHPS-12 adds them in a slim 12-inch countertop unit that slips beside a griddle or fryer, onto an equipment stand, or into a catering setup. It is a handy fit for taquerias, noodle and pho shops, coffee shops adding a lunch menu and any kitchen that has outgrown its range top.
Two octagonal burners are each rated at 25,000 BTU/hr, 50,000 BTU/hr in total, under heavy-duty cast iron grates. The unit measures 12" wide, 27-1/4" deep and 11-1/4" high.
What you will notice in day-to-day use
- Even heat under the pan. Octagonal burners spread the flame for more consistent heat across the bottom of the pot.
- Cooler front edge. The front edge stays cool to the touch, which helps cooks working close to the unit.
- Simple cleanup. A full-length seamless drip pan catches spills without corners for grime to hide in.
- Service from the front. Pilots are adjustable from the front, and the unit is serviceable from the front, so it can stay in place on the line.
- Stays put. Stainless steel legs have adjustable, non-skid feet for leveling on a counter.
Choosing your setup
Gas type: choose natural gas or LP above. The natural gas version ships with an LP conversion kit and regulator, and the LP version is built for propane with a natural gas conversion kit included. Burner ratings are the same for both.
| Gas type | Supply pressure (W.C.) | Open burner input |
|---|---|---|
| Natural gas | 4" | 25,000 BTU/hr per burner |
| LP (propane) | 10" | 25,000 BTU/hr per burner |
Specifications
| Brand | Serv-Ware |
| Model | SHPS-12 |
| Type | 12" countertop gas hot plate, 2 burners |
| Burners | 2 octagonal, 25,000 BTU/hr each |
| Total input | 50,000 BTU/hr |
| Grates | Heavy-duty cast iron |
| Controls | Manual, adjustable front-access pilots |
| Drip pan | Full-length, seamless |
| Gas connection | 3/4" gas line |
| Supply pressure | 4" W.C. natural gas, 10" W.C. LP |
| Construction | Stainless steel |
| Legs | Stainless steel, adjustable non-skid feet |
| Dimensions (W x D x H) | 12" x 27-1/4" x 11-1/4" |
| Shipping weight | 100 lb |
Before it arrives
- Gas: 3/4" gas line; have a qualified installer connect it. For a countertop unit, a flexible gas connector makes it easier to pull forward for cleaning.
- Counter: set it on a sturdy, non-combustible counter or equipment stand.
- Ventilation: install under a commercial hood following your local code.
Warranty
1 year parts and labor on the entire unit from Serv-Ware, counted from the installation date (up to 18 months from shipment), for commercial use in the United States. Labor must be performed by a qualified gas appliance service company approved by Serv-Ware.
Specifications per Serv-Ware data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
