Serv-Ware SGR-6B-C 36" Commercial Range with 6 Open Burners and Convection Oven, 211,000 BTU

If your oven does as much work as your burners, the Serv-Ware SGR-6B-C is worth a close look. It pairs six open burners with a convection oven base, so a fan moves hot air around the cavity for more even browning and faster batch baking. Bakery-cafés, pizzerias, catering kitchens and restaurants that roast and bake through the day will get the most from it.

Each open burner is rated at 30,000 BTU/hr and the oven uses a 31,000 BTU/hr U-shaped burner, for 211,000 BTU/hr in total. The oven thermostat adjusts from 250°F to 500°F and takes a full-size sheet pan side-to-side or front-to-back. The convection fan runs on 120V, 60 Hz, single-phase power.

What you will notice in day-to-day use

• More even bakes. Circulating air helps cookies, sheet-pan vegetables and roasts color evenly from rack to rack.
• Six burners up top. 30,000 BTU/hr per burner keeps stocks, sauces and sauté pans moving together.
• Easy grate handling. Heavy-duty cast grates in 12" x 12" sections lift out one at a time.
• Cleaner pilots. Covered pilots and burner covers help prevent clogging from spills; the pilot is stainless steel.
• Less mess underneath. A pull-out crumb tray with rounded edges catches debris from the burners.
• Level and steady. A fully welded frame sits on 6" adjustable heavy-duty stainless steel legs.

Choosing your setup

Gas type: Serv-Ware lists supply pressures of 4" W.C. for natural gas and 10" W.C. for LP. Let us know which gas your kitchen uses when ordering so we can confirm the correct configuration.

Specifications

Before it arrives

• Gas: 3/4" NPT connection; have a qualified installer connect it to a supply of the correct pressure.
• Power: the convection fan needs a 120V, 60 Hz, single-phase outlet within reach of the range.
• Ventilation: install under a commercial hood following your local code.
• Delivery: 36" wide, 35" deep and 60" tall, about 368 lb shipping weight; plan for a liftgate or dock.

Warranty

1 year parts and labor on the entire unit from Serv-Ware, counted from the installation date (up to 18 months from shipment), for commercial use in the United States. Labor must be performed by a qualified gas appliance service company approved by Serv-Ware.

Specifications per Serv-Ware data; subject to change by the manufacturer.