Nachos, French onion soup, open-faced sandwiches and a quick finish on a casserole all need the same thing: fast, even top heat. The Serv-Ware SGCM-36 is a 36-inch gas cheesemelter that delivers it with an oversized infrared burner, making it a handy finishing station for Mexican kitchens, pubs, diners and Italian restaurants.
One 30,000 BTU/hr infrared burner covers the full cooking area and heats up instantly, so there is no waiting for a preheat. The chrome wire grid slides into three rack positions, the controls are simple manual knobs, and a standby pilot keeps it ready to light. It measures 36" wide, 19" deep and 16-1/2" high.
What you will notice in day-to-day use
- Ready when the plate is. The infrared burner comes up to heat almost immediately, which saves gas compared with leaving a broiler idling all shift.
- Even melting edge to edge. An extra-large burner spreads heat across the whole cooking area, so cheese on the outside of the tray melts as evenly as the middle.
- Three heights. Move the chrome wire grid between three rack positions to go from a gentle melt to a hard brown.
- Less mess. An oil collector at the bottom catches drips before they reach the counter.
- Tough controls. Zinc alloy knobs with a chrome finish stand up to busy hands, and the front and sides are stainless steel.
Choosing your setup
Gas type: the SGCM-36 converts easily between natural gas and propane. Have a qualified technician set it for the gas your kitchen uses; supply pressures are below.
| Gas type | Supply pressure (W.C.) |
|---|---|
| Natural gas | 4" |
| LP (propane) | 10" |
Specifications
| Brand | Serv-Ware |
| Model | SGCM-36 |
| Type | Gas cheesemelter, infrared burner, manual control |
| Total input | 30,000 BTU/hr |
| Burner | Extra-large infrared burner, standby pilot |
| Rack | Chrome wire grid, 3 rack positions |
| Grease management | Bottom oil collector |
| Gas connection | 3/4" gas line |
| Supply pressure | 4" W.C. natural gas; 10" W.C. LP |
| Construction | Stainless steel front and sides; chrome-finished zinc alloy knobs |
| Dimensions (W x D x H) | 36" x 19" x 16-1/2" |
| Shipping weight | 37 lb |
Before it arrives
- Gas: plan for a 3/4" gas line and have a qualified installer connect it and convert it to LP if needed.
- Ventilation: install under a commercial hood following your local code.
- Placement: mounting method is not specified in the data, so confirm how it will sit (counter, shelf or range top) and the required clearances with the installation manual.
Warranty
1 year parts and labor from Serv-Ware, counted from the original installation date (up to a maximum of 18 months from shipment), for commercial use in the United States; warranty labor must be done by a qualified gas appliance service company.
Specifications per Serv-Ware data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

