High-volume pizzerias, college-town shops and catering kitchens that run a full topping line need a make table that keeps up. The Serv-Ware PP93-12-HC stretches more than 94 inches, with twelve pans along the rail and the largest refrigerated base in the series underneath.
The refrigerated base offers 32 cu. ft. of storage and holds 33°F – 41°F with a 3/4 HP compressor rated at 1,877 BTU/h. It runs on R290 hydrocarbon refrigerant and plugs into a standard 115V outlet, drawing 5.5 amps.
What you will notice in day-to-day use
- Toppings stay cold and organized. 12 included 1/3-size polycarbonate pans sit in the refrigerated rail right at the make line, with the cabinet below holding back-up product at 33°F – 41°F.
- A place to build pies. A plastic cutting board is included and runs the length of the work surface, so dough and toppings meet in one spot.
- Easy-to-read control. An electronic thermostat with a digital LED display shows the cabinet temperature at a glance, which makes line checks quick.
- Fewer defrost chores. The unit defrosts itself every 6 hours and evaporates the condensate automatically, so there is no drain pan to empty.
- A full make line in one piece. Twelve pans across the rail leave room for specialty toppings alongside the everyday ones, so cooks are not running to the walk-in mid-shift.
- Extra cooling muscle. A larger 3/4 HP compressor handles the bigger cabinet and the frequent door openings of a long line.
Specifications
| Brand | Serv-Ware |
| Model | PP93-12-HC |
| Type | Refrigerated pizza prep table |
| Pans | 12 x 1/3-size polycarbonate pans (included) |
| Cutting board | Plastic, included |
| Storage capacity | 32 cu. ft. |
| Temperature range | 33°F – 41°F |
| Controls | Electronic thermostat, digital LED display |
| Defrost | Automatic, every 6 hours; automatic condensate evaporation |
| Compressor | 3/4 HP |
| Refrigeration capacity | 1,877 BTU/h |
| Refrigerant | R290 (hydrocarbon), 3.7 oz. |
| Shelves | 1 epoxy coated wire shelf per door |
| Construction | Stainless steel exterior, AISI 304 stainless framework; painted aluminum interior with 304 stainless floor; CFC-free foam insulation |
| Gaskets | Magnetic, tool-free replacement |
| Electrical | 115V / 60Hz / 1-phase, 5.5 A, NEMA 5-15P plug |
| Dimensions (W x D x H) | 94-1/4" x 32-1/4" x 41-1/4" |
| Shipping weight | 575 lb |
Before it arrives
- Power: plugs into a standard 115V NEMA 5-15 outlet (5.5 A); a dedicated circuit is recommended.
- Location: it is designed for indoor, climate-controlled kitchens with good air flow; keep it away from ovens and other high heat sources.
- Delivery: it is 94-1/4" wide, 32-1/4" deep and ships at about 575 lb; measure doorways and plan for a liftgate.
Warranty
3 years parts and labor on the entire unit, plus an additional 5 years of coverage on the compressor (part only), from Serv-Ware. Labor coverage applies in the United States, for commercial use.
Specifications per Serv-Ware data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

