Serv-Ware PP44-6-HC 48" Refrigerated Pizza Prep Table, 6 Pans, 12 Cu. Ft., R290, 115V
Small pizza shops, food trucks with a back kitchen and restaurants adding pizza to the menu often need a make line that fits a short wall. The Serv-Ware PP44-6-HC packs a refrigerated topping rail, a full-length cutting board and chilled storage below into a footprint under 48 inches wide.
The refrigerated base offers 12 cu. ft. of storage and holds 33°F – 41°F with a 1/2 HP compressor rated at 1,365 BTU/h. It runs on R290 hydrocarbon refrigerant and plugs into a standard 115V outlet, drawing 5 amps.
What you will notice in day-to-day use
- Toppings stay cold and organized. 6 included 1/3-size polycarbonate pans sit in the refrigerated rail right at the make line, with the cabinet below holding back-up product at 33°F – 41°F.
- A place to build pies. A plastic cutting board is included and runs the length of the work surface, so dough and toppings meet in one spot.
- Easy-to-read control. An electronic thermostat with a digital LED display shows the cabinet temperature at a glance, which makes line checks quick.
- Fewer defrost chores. The unit defrosts itself every 6 hours and evaporates the condensate automatically, so there is no drain pan to empty.
- Compact footprint. At 47-3/8" wide it slots into tight lines where a longer pizza table will not fit.
- Built to wipe down. A stainless steel exterior and 304 stainless framework stand up to flour, sauce and daily cleaning.
Specifications
| Brand | Serv-Ware |
| Model | PP44-6-HC |
| Type | Refrigerated pizza prep table |
| Pans | 6 x 1/3-size polycarbonate pans (included) |
| Cutting board | Plastic, included |
| Storage capacity | 12 cu. ft. |
| Temperature range | 33°F – 41°F |
| Controls | Electronic thermostat, digital LED display |
| Defrost | Automatic, every 6 hours; automatic condensate evaporation |
| Compressor | 1/2 HP |
| Refrigeration capacity | 1,365 BTU/h |
| Refrigerant | R290 (hydrocarbon), 3.7 oz. |
| Shelves | 1 epoxy coated wire shelf per door |
| Construction | Stainless steel exterior, AISI 304 stainless framework; painted aluminum interior with 304 stainless floor; CFC-free foam insulation |
| Gaskets | Magnetic, tool-free replacement |
| Electrical | 115V / 60Hz / 1-phase, 5 A, NEMA 5-15P plug |
| Dimensions (W x D x H) | 47-3/8" x 32-1/4" x 41-1/4" |
| Shipping weight | 290 lb |
Before it arrives
- Power: plugs into a standard 115V NEMA 5-15 outlet (5 A); a dedicated circuit is recommended.
- Location: it is designed for indoor, climate-controlled kitchens with good air flow; keep it away from ovens and other high heat sources.
- Delivery: it is 47-3/8" wide, 32-1/4" deep and ships at about 290 lb; measure doorways and plan for a liftgate.
Warranty
3 years parts and labor on the entire unit, plus an additional 5 years of coverage on the compressor (part only), from Serv-Ware. Labor coverage applies in the United States, for commercial use.
Specifications per Serv-Ware data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
