Serv-Ware DD49-2-HC 49" Draft Beer Dispenser, 2 Towers, 2 Faucets, 10.45 Cu. Ft., 115V

Two towers, one faucet each, on a 49-inch base: the Serv-Ware DD49-2-HC lets two bartenders pour at the same time without reaching across each other. It is a good match for busy bars, sports grills and restaurants that want two draft lines spread across the back bar.

The cabinet holds 10.45 cu. ft. at 33°F – 41°F, cooled by a 2/5 HP compressor with R290 hydrocarbon refrigerant. It plugs into a standard 115V outlet (NEMA 5-15P) and draws only 3 amps. Overall size is 49-1/8" W x 24-3/8" D x 42-1/8" H.

What you will notice in day-to-day use

• Two pour points. Separate towers spread the faucets apart so two staff members can pour without crowding.
• Less foam, less waste. A 3" diameter insulated stainless steel beer column is designed to carry cold air up to the tower, which helps reduce foaming and the beer you lose to it.
• Secure and self-closing. Doors close on their own and lock, so the cooler stays cold and your inventory stays put after hours.
• Fits the kegs you buy. The interior is designed to take a variety of keg sizes, including half-barrel, quarter and slim quarter kegs.

Specifications

Before it arrives

• Power: a standard 115V grounded outlet with a NEMA 5-15P receptacle.
• Location: set it indoors in a climate-controlled area away from heat sources and leave room behind and around it for airflow.
• Casters: the casters ship loose, so fit them before moving the cooler into place.
• Delivery: shipping weight is about 285 lb; measure doorways against the 49-1/8" x 24-3/8" footprint.

Warranty

Three years parts and labor on the entire unit (United States, commercial use), plus an additional five years on the compressor (part only), from Serv-Ware.

Specifications per Serv-Ware data; subject to change by the manufacturer.