Serv-Ware DD24-1-HC 24" Draft Beer Dispenser, 1 Tower, 1 Faucet, 7.2 Cu. Ft., 115V

Want draft beer without giving up a big chunk of the bar? The Serv-Ware DD24-1-HC is a 24-inch kegerator with a single tower and one faucet, sized for a small pub, taproom corner, café or restaurant that pours one house beer and wants it served cold and fresh.

The cabinet holds 7.2 cu. ft. at 33°F – 41°F, cooled by a 1/8 HP compressor with R600 hydrocarbon refrigerant. It plugs into a standard 115V outlet (NEMA 5-15P) and draws only 3 amps. Overall size is 24-1/8" W x 31-7/8" D x 39-1/2" H.

What you will notice in day-to-day use

• Small footprint. At about 24" wide it slides into tight spaces behind a bar or counter.
• Less foam, less waste. A 3" diameter insulated stainless steel beer column is designed to carry cold air up to the tower, which helps reduce foaming and the beer you lose to it.
• Fits the kegs you buy. The interior is designed to take a variety of keg sizes, including half-barrel, quarter and slim quarter kegs.
• Secure and self-closing. Doors close on their own and lock, so the cooler stays cold and your inventory stays put after hours.
• Easy to keep running. The installation board removes for quick access to the condenser coil, and the magnetic gaskets can be swapped without tools.

Specifications

Before it arrives

• Power: a standard 115V grounded outlet with a NEMA 5-15P receptacle.
• Location: set it indoors in a climate-controlled area away from heat sources and keep about 3" between the back and the wall for airflow.
• Casters: the casters ship loose, so fit them before moving the cooler into place.
• Delivery: shipping weight is about 195 lb; measure doorways against the 24-1/8" x 31-7/8" footprint.

Warranty

Three years parts and labor on the entire unit (United States, commercial use), plus an additional five years on the compressor (part only), from Serv-Ware.

Specifications per Serv-Ware data; subject to change by the manufacturer.