The Pitco VF-35S is an ENERGY STAR gas floor fryer with 35 lb of oil over a 14" x 13-5/8" frying area, rated at 70,000 BTU/hr and configured for liquid propane.
ENERGY STAR Efficiency in a Value Fryer
The VF series brings modern gas efficiency to a free-standing, stand-alone floor fryer. The ENERGY STAR qualified VF35 uses about 40% less gas than a 65C+S while delivering the same production rate, and the VF65 gives larger kitchens a big 65 lb frypot at 95,000 BTU/hr.
A millivolt control with standing pilot needs no electrical connection, keeping the fryer simple, dependable and working through power outages.
Why Operators Choose It
- Lower gas bills: efficient burner design in a value-priced fryer (ENERGY STAR qualified on the VF35)
- Simple and dependable: millivolt control with standing pilot, no electricity required
- Built for daily use: stainless steel tank, front, door and sides
- Safety: pilot safety and high-temperature limit shut off gas automatically
Controls
Millivolt thermostat with standing pilot. Stand-alone fryer; not available with built-in filtration or in a battery.
Ideal For
- Independent restaurants and bars watching utility costs
- Concessions and secondary fry stations
- Operations replacing older, inefficient economy fryers
Specifications
| Model | VF-35S |
| Series | Pitco VF ENERGY STAR Gas |
| Fuel / power | Gas: Liquid Propane |
| Oil capacity | 35 lb |
| Frying area | 14" x 13-5/8" |
| Input | 70,000 BTU/hr |
| Standard control | Millivolt thermostat |
| Overall dimensions | 15-5/8" W x 32" D x 47-1/4" H |
| Gas connection | 3/4" NPT |
| Electrical | None required |
| Approx. shipping weight | 161 lbs. |
| Certifications | NSF, CSA, CE, ENERGY STAR |
| Warranty | 5-year Limited Frypot Parts |
Installation & Utility Requirements
- Gas connection: 3/4" NPT rear gas inlet
- Gas pressure: maximum 1/2 PSI supply to the combination gas valve; natural gas and LP (propane) models are not interchangeable without a factory conversion
- Electrical: none required; the standing pilot and millivolt valve are self-powered, so the fryer keeps working during a power outage
- Clearances: 6" from combustible construction at sides and rear (0" from non-combustible); 30" minimum clear aisle in front; do not curb mount
- Ventilation: install under a commercial exhaust hood; do not restrict flue gases or place hood drains over the flue
- Mobile installs: fryers on casters (and any fryer with basket lifts) must use a flexible gas hose with restraining cable per CSA/AGA requirements
What's Included
- Fry baskets
- Tube rack
- Removable basket hanger
- Drain line clean-out rod
Factory Options (Additional Cost)
- Casters
- Tank cover
- Portable filter systems
Warranty
Pitco warranty: 5-year Limited Frypot Parts. Use a qualified installer and register the fryer with Pitco after installation to keep coverage in force.
Specifications per Pitco data; subject to change by the manufacturer. Contact us for configuration help and control upgrades.
Warranty
Couldn't load pickup availability

