The MagiKitch'n MKG-60-ST is the griddle for kitchens that care about exact numbers. It pairs a 60-inch, 1" thick polished steel plate with solid state thermostats, so it suits operators who cook delicate items next to hard sears: brunch restaurants doing eggs and crepes, teppanyaki-style counters, hotel kitchens and busy diners.
Total input is 150,000 BTU/hr from ten stainless steel venturi burners spaced every 6 inches. Five solid state thermostats, one per 12-inch zone, hold anywhere from 150°F – 550°F, the widest range in the MKG line, and the matchless ignition lights the pilots as soon as the power is on. Cooking surface: 59-3/4" x 24".
What you will notice in day-to-day use
- Low and slow, or very hot. Starting at 150°F, the solid state controls can gently hold or warm product in one zone while another runs at 550°F.
- Tight, responsive control. Probes embedded in the plate feed the thermostats the real surface temperature, so they correct quickly after a heavy load.
- A thick plate that keeps its heat. The 1" polished plate stores plenty of energy and spreads it evenly from edge to edge.
- Easy start-up. Matchless ignition and recessed pilot-ready lights mean no matches or spark buttons at opening time, and safety pilots shut off on flame loss.
- Cleanup that does not drag on. A 3-1/2" front trough and welded chute feed a 3.75 gallon grease box with a splash-zone compartment; smooth stainless sides and no exposed fasteners wipe down fast.
Choosing your setup
Gas type: available for natural gas or liquid propane; choose the gas your kitchen uses above. Pressures for each gas:
| Gas | Supply pressure | Burner (manifold) pressure |
|---|---|---|
| Natural gas | 7" – 14" W.C. | 4" W.C. |
| Liquid propane | 12" – 14" W.C. | 10" W.C. |
If you do not need the 150°F low end, the MKG-60-E with electric thermostats (200°F – 550°F) is the alternative, and 24", 36" and 48" widths are also offered.
Specifications
| Brand | MagiKitch'n |
| Model | MKG-60-ST |
| Type | Countertop gas griddle, solid state thermostat controls, matchless ignition |
| Total input | 150,000 BTU/hr |
| Burners | 10 x 15,000 BTU/hr stainless steel venturi burners, one every 6" |
| Controls | 5 solid state thermostats, one every 12", 150°F – 550°F; probes embedded in the plate |
| Ignition | Matchless 24VAC ignition, safety pilot with flame-loss shutoff (one pilot per two zones) |
| Griddle plate | 1" thick polished steel |
| Cooking area | 59-3/4" W x 24" D |
| Grease management | 3-1/2" front trough, fully welded chute, 3.75 gal grease box (left) with splash-zone compartment |
| Construction | Double-walled stainless steel sides, tapered back splash, solid-panel cabinet base, no exposed fasteners |
| Legs | 4", removable |
| Gas connection | 3/4"; regulator and shutoff factory installed |
| Electrical (controls) | 115V, 50/60 Hz, 1.10 A |
| Dimensions (W x D x H) | 60" x 31-9/16" x 23-9/32" |
| Net weight | 700 lb |
| Shipping weight | 750 lb (crate 75" x 45" x 40") |
| Certifications | CE, CSA Flame, CSA Star, NSF, Made in USA |
Before it arrives
- Gas and power: 3/4" gas inlet; a qualified installer should connect it and confirm supply pressure. The matchless ignition and thermostats also need a 115V outlet (1.10 A).
- Ventilation: install under a commercial hood and do not block the flue at the rear, per your local code.
- Clearance: keep 6" at the rear and 2" at the sides from combustible surfaces (0" sides next to non-combustible). If you mount it on a stand with casters, use a flexible gas hose with a restraint.
- Delivery: approx. 750 lb shipping weight on a 75" x 45" x 40" crate; any stand ships separately, so plan for a liftgate and a few hands.
Warranty
2 years parts and labor from MagiKitch'n.
Specifications per MagiKitch'n data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

