MagiKitch'n FM-SMB-672 72" Floor Model Ceramic Coal Charbroiler, 16 Burners, 240,000 BTU/hr
The MagiKitch'n FM-SMB-672 is the largest of the standard-output FM-SMB floor broilers: six feet of ceramic coal charbroiling for operations that live and die by the grill. Think high-volume steakhouses, rodizio and barbecue concepts, banquet kitchens and institutional feeding where one station has to cook for hundreds.
Sixteen stainless steel burners deliver a total of 240,000 BTU/hr (70 kW) under a ceramic coal screen, heating 1,704 sq. in. of cooking area. Every burner has an individual front control, so you can split the 72-inch top into as many heat zones as your menu needs.
What you will notice in day-to-day use
- The most grill in the series. More than 1,700 sq. in. of cooking area lets one cook handle volume that would otherwise take two broilers.
- Zone it however you like. Sixteen independently controlled burners make it easy to keep a hot sear zone, a finishing zone and a holding area side by side.
- Traditional coal-bed character. The ceramic coal screen radiates heat evenly to the grid for consistent marking.
- Grease handled at the front. The E-Z Tilt grid drains forward to the trough, and three crumb trays catch drippings across the width.
Choosing your setup
Gas type: this charbroiler is built for either natural gas or liquid propane; choose the gas your kitchen uses above. Prefer radiants? The FM-RMB-672 is the same broiler with V-shaped radiants.
| Gas | Supply pressure | Burner pressure |
|---|---|---|
| Natural gas | 7–10" W.C. | 4" W.C. |
| Liquid propane | 11–13" W.C. | 10" W.C. |
Specifications
| Brand | MagiKitch'n |
| Model | FM-SMB-672 |
| Type | Floor model gas charbroiler, ceramic coal, standard output |
| Burners | 16 stainless steel burners, individual front controls |
| Total input | 240,000 BTU/hr (70 kW) |
| Cooking area | 1,704 sq. in. |
| Top grid | Free-floating steel, 1/2" rods, round rod standard spacing |
| Heat source | Ceramic coal screen |
| Crumb trays | 3 |
| Grease management | E-Z Tilt top grid drains to front trough; water tubs |
| Service shelf | 6" stainless steel with towel bar |
| Construction | Fully insulated, double-walled cabinet; stainless steel on all four sides |
| Gas connection | 3/4" NPT supply; 3/4" regulator shipped unattached (safety pilot models use 1/2" NPT) |
| Footprint (W x D) | 72" x 35-1/2" |
| Net weight | 950 lb |
| Shipping weight | 998 lb |
| Certifications | CE, CSA Flame, CSA Star, NSF, Made in USA |
Before it arrives
- Gas: a qualified installer must fit the supplied 3/4" regulator before connecting the 3/4" NPT supply. On a stand with casters, use a flexible gas hose with a restraint (a 48" quick-disconnect hose and lanyard kit is offered).
- Ventilation: install under a commercial hood per local code; do not block the flue.
- Clearances: not for flush mounting. To combustibles keep 6" sides, 8" rear, 4" floor and 30" front; 0" to non-combustible.
- Delivery: about 998 lb crated; plan for a liftgate or dock.
Warranty
2 years parts and labor from MagiKitch'n.
Specifications per MagiKitch'n data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
