MagiKitch'n FM-SMB-636 36" Floor Model Ceramic Coal Charbroiler, 7 Burners, 105,000 BTU/hr
For a lot of restaurants, 36 inches is the charbroiler size that just works: room for steaks, chicken and burgers together without eating up the line. The MagiKitch'n FM-SMB-636 is a floor model ceramic coal broiler for steakhouses, grills and busy casual dining kitchens.
Seven stainless steel burners deliver 105,000 BTU/hr (30.8 kW) in total under a ceramic coal screen, heating 810 sq. in. of cooking surface on one 32-3/4" x 24-3/4" floating steel grid. Individual front burner controls let you set up hot and moderate zones across the width.
What you will notice in day-to-day use
- Set up your zones. With seven burners, each with its own front control, you can sear on one side and finish or hold on the other.
- Coal-style heat. A ceramic coal screen spreads radiant heat to the grid for even marking and that familiar charbroiled flavor.
- Grates that stay flat. The free-floating grid of 1/2" steel rods is designed to move with the heat instead of warping, and a quick lift handle makes it easy to raise.
- Less grease on the line. Tilt the E-Z Tilt grid and grease runs forward into the front trough; a crumb tray below catches debris.
Choosing your setup
Gas type: this charbroiler is built for either natural gas or liquid propane; choose the gas your kitchen uses above. Prefer radiants? The FM-RMB-636 is the same broiler with V-shaped radiants.
| Gas | Supply pressure | Burner pressure |
|---|---|---|
| Natural gas | 7–10" W.C. | 4" W.C. |
| Liquid propane | 11–13" W.C. | 10" W.C. |
Specifications
| Brand | MagiKitch'n |
| Model | FM-SMB-636 |
| Type | Floor model gas charbroiler, ceramic coal, standard output |
| Burners | 7 stainless steel burners, individual front controls |
| Total input | 105,000 BTU/hr (30.8 kW) |
| Cooking area | 810 sq. in. |
| Top grid | 1 floating steel grid, 32-3/4" x 24-3/4", 1/2" steel rods, standard spacing |
| Heat source | Ceramic coal screen |
| Crumb trays | 1 |
| Grease management | E-Z Tilt top grid drains to front trough; water tubs |
| Service shelf | 6" stainless steel with towel bar |
| Construction | Fully insulated, double-walled cabinet; stainless steel on all four sides |
| Gas connection | 3/4" NPT supply; 3/4" regulator shipped unattached (safety pilot models use 1/2" NPT) |
| Footprint (W x D) | 36" x 35-1/2" |
| Net weight | 505 lb |
| Shipping weight | 555 lb |
| Certifications | CE, CSA Flame, CSA Star, NSF, Made in USA |
Before it arrives
- Gas: a qualified installer must fit the supplied 3/4" regulator before connecting the 3/4" NPT supply. On a stand with casters, use a flexible gas hose with a restraint (a 48" quick-disconnect hose and lanyard kit is offered).
- Ventilation: install under a commercial hood per local code; do not block the flue.
- Clearances: not for flush mounting. To combustibles keep 6" sides, 8" rear, 4" floor and 30" front; 0" to non-combustible.
- Delivery: about 555 lb crated; plan for a liftgate or dock.
Warranty
2 years parts and labor from MagiKitch'n.
Specifications per MagiKitch'n data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
