MagiKitch'n FM-SMB-624 24" Floor Model Ceramic Coal Charbroiler, 4 Burners, 60,000 BTU/hr
Short on line space but still want real char marks? The MagiKitch'n FM-SMB-624 packs a ceramic coal charbroiler into a 24-inch floor model, a smart fit for a bistro with a short hot line or a bar grilling burgers to order.
Four stainless steel burners put out a total of 60,000 BTU/hr (17.6 kW) beneath a ceramic coal screen, giving you 513 sq. in. of cooking area on a single 20-3/4" x 24-3/4" floating steel grid. Each burner has its own front control, so you can run the whole top hot or keep part of it gentler for holding.
What you will notice in day-to-day use
- Classic coal-bed flavor. The ceramic coal screen sits over the burners and radiates heat up to the grid, giving you the look and taste guests expect from a charbroiler.
- No warping, even after years of heat. The free-floating top grid uses 1/2" steel rods that expand and contract freely instead of buckling.
- Grease goes where you want it. The E-Z Tilt grid drains grease forward into the front trough, and a crumb tray catches what falls through.
- Plate-up space right at hand. A 6" stainless service shelf with towel bar runs along the front for tongs, plates and side towels.
Choosing your setup
Gas type: this charbroiler is built for either natural gas or liquid propane; choose the gas your kitchen uses above. Prefer radiants? The FM-RMB-624 is the same broiler with V-shaped radiants.
| Gas | Supply pressure | Burner pressure |
|---|---|---|
| Natural gas | 7–10" W.C. | 4" W.C. |
| Liquid propane | 11–13" W.C. | 10" W.C. |
Specifications
| Brand | MagiKitch'n |
| Model | FM-SMB-624 |
| Type | Floor model gas charbroiler, ceramic coal, standard output |
| Burners | 4 stainless steel burners, individual front controls |
| Total input | 60,000 BTU/hr (17.6 kW) |
| Cooking area | 513 sq. in. |
| Top grid | 1 floating steel grid, 20-3/4" x 24-3/4", 1/2" steel rods, standard spacing |
| Heat source | Ceramic coal screen |
| Crumb trays | 1 |
| Grease management | E-Z Tilt top grid drains to front trough; water tubs |
| Service shelf | 6" stainless steel with towel bar |
| Construction | Fully insulated, double-walled cabinet; stainless steel on all four sides |
| Gas connection | 3/4" NPT supply; 3/4" regulator shipped unattached (safety pilot models use 1/2" NPT) |
| Footprint (W x D) | 24" x 35-1/2" |
| Net weight | 350 lb |
| Shipping weight | 401 lb |
| Certifications | CE, CSA Flame, CSA Star, NSF, Made in USA |
Before it arrives
- Gas: a qualified installer must fit the supplied 3/4" regulator before connecting the 3/4" NPT supply. On a stand with casters, use a flexible gas hose with a restraint (a 48" quick-disconnect hose and lanyard kit is offered).
- Ventilation: install under a commercial hood per local code; do not block the flue.
- Clearances: not for flush mounting. To combustibles keep 6" sides, 8" rear, 4" floor and 30" front; 0" to non-combustible.
- Delivery: about 401 lb crated; plan for a liftgate or dock.
Warranty
2 years parts and labor from MagiKitch'n.
Specifications per MagiKitch'n data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
