The MagiKitch'n CM-RMB-624 brings radiant charbroiling to kitchens that only have two feet to spare. This 24" countertop gas charbroiler is a good match for cafes, bars, delis and smaller restaurants adding grilled sandwiches, burgers and chicken, and it can be installed on a work table, a counter or a properly insulated refrigerated or freezer base.
Four stainless steel burners provide 60,000 BTU/hr in total, each topped by a V-shaped radiant. Together they heat a single 20-3/4" x 24-3/4" floating steel grid with 513 square inches of cooking area.
What you will notice in day-to-day use
- Steady radiant heat. V-shaped radiants over each burner spread the flame into even heat and vaporize drippings for real grilled flavor.
- Control burner by burner. Each of the four burners has its own front control, so you can run a hot side and a gentler side on the same grid.
- Water tub underneath. The CM series uses water tubs below the burners to catch debris, which makes the end-of-day cleanup simpler.
- A grid built for daily heat. The free floating 1/2" steel rod grid expands and contracts without warping, and the E-Z Tilt design drains grease into the front trough.
- Sturdy, insulated cabinet. Double walled and fully insulated, with stainless steel on all four sides and a 6" stainless service shelf with towel bar.
Choosing your setup
Gas type: this charbroiler is offered for natural gas or liquid propane (LP); choose the gas your kitchen uses above. The 60,000 BTU/hr rating is the total input. A 3/4" gas regulator ships unattached and must be installed on the supply before the gas line is connected. Supply and burner pressures are below.
| Gas | Supply pressure | Burner pressure |
|---|---|---|
| Natural gas | 7–10" W.C. | 4" W.C. |
| Liquid propane | 11–13" W.C. | 10" W.C. |
The CM series is also offered in 36", 48", 60" and 72" widths, with ceramic coal (CM-SMB) versions and high-output (-H) models.
Specifications
| Brand | MagiKitch'n |
| Model | CM-RMB-624 |
| Type | Countertop gas charbroiler, radiant |
| Burners | 4 stainless steel burners, individual front controls |
| Total input | 60,000 BTU/hr (17.6 kW) |
| Heat source | V-shaped stainless radiants |
| Cooking area | 513 sq. in. |
| Top grid | 1 floating steel grid, 20-3/4" x 24-3/4", 1/2" round steel rods, standard spacing, E-Z Tilt |
| Debris collection | Water tub |
| Service shelf | 6" stainless steel with towel bar |
| Gas connection | 3/4" NPT supply connection, 3/4" regulator shipped unattached |
| Construction | Double walled, fully insulated cabinet; stainless steel on all four sides |
| Footprint (W x D) | 24" x 35-1/2" |
| Net weight | 362 lb |
| Shipping weight | 412 lb |
| Shipping crate (H x W x L) | 26" x 42" x 42" |
| Certifications | CE, CSA Flame, CSA Star, NSF, Made in USA |
Before it arrives
- Gas: have a qualified installer fit the supplied 3/4" regulator, then connect to the 3/4" NPT inlet. Size the supply line to hold burner pressure with every gas appliance on the line running.
- Ventilation: install under a commercial hood following local code; do not block the flue or place hood drains over it.
- Clearance: keep 6" at the sides, 8" at the rear and 4" at the floor from combustible materials (0" sides and rear to non-combustible), and allow a 30" aisle in front. Indoor use only.
- Delivery: ships crated at about 412 lb (26" x 42" x 42" H x W x L), so plan for a liftgate or dock and enough hands to set it in place.
Warranty
2 years parts and labor from MagiKitch'n.
Specifications per MagiKitch'n data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

