Jackson TempStar VER High Temp Door-Type Dishwasher, 41 Racks/Hr, Ventless with Energy Recovery
No hood, no hot water line? The Jackson TempStar VER is a ventless door-type dishwasher with a two-pass energy recovery system, so it runs on a cold water connection, an electrical circuit and a drain. It suits restaurants, bars and casinos in leased spaces or remodels where a new hood would be costly.
It washes up to 41 racks per hour (39 at NSF-rated load time), about 1,025 dishes or 1,476 glasses an hour, on 0.89 gallons of water per rack. The normal cycle runs 87 seconds, which includes a 30-second vent stage. A built-in 70°F rise booster with the Sani-Sure™ system brings the final rinse to 180°F, and the chamber clears 17-1/4".
What you will notice in day-to-day use
- Goes where a hood cannot. The ventless design needs no hood, opening up spots a standard door-type could never go.
- Cold water is all it needs. Energy recovery handles incoming water from 40°F to 90°F, so there is no need to run a hot water line to the dish area.
- The door stays shut until it is safe. A door interlock keeps the door locked while the cycle is running.
- Four timed cycles. Normal handles everyday plates; Medium, Heavy and Extra Heavy take on tougher loads.
- A clean final rinse. The self-draining stainless steel pump prevents detergent carryover.
Choosing your setup
Electrical: choose the voltage and phase above that fit your building. A kit lets you convert between three-phase and single-phase later, and a 460V version is listed as a factory option.
| Electrical service | Total load | Min. circuit ampacity | Max. overcurrent protection |
|---|---|---|---|
| 208V / 1-Phase | 75.2 A | 76.5 A | 80.0 A |
| 208V / 3-Phase | 45.6 A | 46.8 A | 50.0 A |
| 230V / 1-Phase | 82.7 A | 83.9 A | 90.0 A |
| 230V / 3-Phase | 49.8 A | 51.1 A | 60.0 A |
Specifications
| Brand | Jackson |
| Model | TempStar VER |
| Type | Ventless high temperature sanitizing door-type dishwasher with energy recovery |
| Racks per hour | 41 (39 at NSF load time) |
| Dishes / glasses per hour | 1,025 / 1,476 |
| Cycle times | 87, 147, 207 or 327 seconds (each includes a 30-second vent) |
| Water use | 0.89 gal per rack; 36.49 gal per hour |
| Wash / rinse temperature (min.) | 150°F / 180°F |
| Booster heater | Built-in, 70°F rise |
| Tank heat | Electric |
| Wash pump | 1 HP self-draining stainless steel |
| Chamber clearance | 17-1/4" |
| Incoming water | 40–90°F cold water, 10 PSI, 3/4" NPT |
| Drain | 1-1/2" NPT |
| Heat output | 2,100 BTU/hr latent; 4,685 BTU/hr sensible |
| Electrical options | 208V / 1-Phase, 208V / 3-Phase, 230V / 1-Phase, 230V / 3-Phase |
| Dimensions (W x D x H) | 32" x 30-7/8" x 82" |
| Net / shipping weight | 318 lb / 358 lb |
| Certifications | ENERGY STAR®; NSF/ANSI 3 (ETL Sanitation) |
Before it arrives
- Have a licensed electrician run a dedicated circuit sized from the table above.
- Plumb a 3/4" cold water line at 10 PSI and a 1-1/2" drain. The pressure regulator ships with the machine for your plumber to install.
- No hood is required. Leave at least 6" above the heat exchanger; the back can sit against the wall, with 4" at the side for corner installs.
- Some assembly is needed on site. The machine ships at 358 lb.
What's included
- Pressure regulator (installed by others)
- Stainless steel front dress panel
- Adjustable bullet feet
Warranty
One-year parts and labor warranty from Jackson.
Specifications per Jackson WWS data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
