Jackson DynaStar VER High Temp Door-Type Dishwasher, 40 Racks/Hr, Ventless with Energy Recovery
No hood, no ductwork, no problem. The Jackson DynaStar VER is a ventless high temperature door-type dishwasher that recovers its own steam, so it fits where a hooded machine cannot. Think hotel pantries, older buildings and restaurants whose dish area cannot be vented.
It is rated for up to 40 racks per hour (38 at NSF-rated load time), around 1,000 dishes or 1,440 glasses. The standard cycle runs 88 seconds, including a 30-second vent stage, and Econo rinse uses just 0.70 gallons per rack (0.89 on Turbo). A built-in 40-70°F rise booster delivers the 180°F final rinse, and the chamber clears 17-1/2".
What you will notice in day-to-day use
- Install it almost anywhere. The two-pass energy recovery system condenses steam inside the machine, so no vent hood is required.
- One cold water line. It runs on a single 40-90°F cold water connection, which keeps plumbing simple.
- No steam in the face. A door interlock keeps the door shut until the vent stage finishes.
- Compact profile. The heat exchanger is built into the body, so overall height stays at 62-3/8".
- Three cycle lengths. Pick 88, 138 or 268 seconds depending on how heavy the soil is.
- Service-friendly. An LED display, diagnostics and a delime cycle ease daily care.
Choosing your setup
Electrical: pick the voltage and phase above that match your service. The figures below are for the standard single-point connection. Dual-point wiring and 460V three-phase are factory options, and the unit converts between three-phase and single-phase with a kit.
| Electrical service | Total load | Min. circuit ampacity | Max. overcurrent protection |
|---|---|---|---|
| 208V / 1-Phase | 68.8 A | 70.1 A | 75.0 A |
| 208V / 3-Phase | 42.2 A | 43.4 A | 45.0 A |
| 230V / 1-Phase | 77.1 A | 78.4 A | 80.0 A |
| 230V / 3-Phase | 47.0 A | 48.2 A | 50.0 A |
Specifications
| Brand | Jackson |
| Model | DynaStar VER |
| Type | Ventless high temperature sanitizing door-type dishwasher with energy recovery |
| Racks per hour | 40 (38 at NSF load time) |
| Dishes / glasses per hour | 1,000 / 1,440 |
| Cycle times | 88, 138 or 268 seconds (each includes a 30-second vent) |
| Water use | 0.70 gal per rack Econo (0.89 Turbo); 28.00 gal per hour Econo |
| Wash / rinse temperature (min.) | 150°F / 180°F |
| Booster heater | Built-in, 40-70°F rise, 1.66 gal tank |
| Tank heat | Electric; 8.0 gal wash tank |
| Wash pump | 1 HP stainless steel |
| Chamber clearance | 17-1/2" |
| Incoming water | 40-90°F cold, 15-65 PSI, 1/2" NPT |
| Drain | 1-1/2" ID |
| Heat output | 6,047 BTU/hr latent; 5,834 BTU/hr sensible |
| Electrical options | 208V or 230V, 1- or 3-Phase |
| Dimensions (W x D x H) | 29-1/4" x 35-1/8" x 62-3/8" |
| Height with door open | 75-3/4" |
| Shipping weight | 391 lb |
| Certifications | ENERGY STAR®; NSF/ANSI 3 (ETL Sanitation) |
Before it arrives
- Have a licensed electrician run a dedicated circuit sized from the table above.
- Supply cold water at 40-90°F and 15-65 PSI. The pumped rinse means a pressure regulator is only needed above 65 PSI.
- No hood is required, but confirm with your local inspector. The machine can sit tight to the rear wall; corner installs need 4-1/4" at the side.
- Plan for 75-3/4" of height with the door raised. The crated unit weighs 391 lb.
What's included
- Front and side stainless steel dress panels
- Adjustable bullet feet
Warranty
One-year parts and labor warranty from Jackson.
Specifications per Jackson WWS data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
