Jackson DynaStar HH-E VER High Temp Door-Type Dishwasher, 40 Racks/Hr, Ventless 27" Tall Chamber
The Jackson DynaStar HH-E VER brings three big advantages together: a 27" tall chamber, dual dishwasher and potwasher certification, and a ventless energy recovery system that needs no hood. That makes it a smart choice for kitchens that wash large cookware but cannot add ductwork, such as hotel banquet spaces, schools in older buildings and leased restaurant sites.
It is rated at up to 40 racks per hour (38 at NSF-rated load time), about 1,000 dishes or 1,440 glasses. The standard cycle lasts 88 seconds, including a 30-second vent stage. Econo rinse uses 0.72 gallons per rack and Turbo uses 0.89. A built-in 40-70°F rise booster gives the 180°F final rinse, and a 2 HP pump powers the triple wash arm system.
What you will notice in day-to-day use
- No hood to buy or install. A two-pass energy recovery system pulls steam out of the chamber and reuses the heat.
- Cold water hookup. It is designed for 40-90°F incoming water, so no hot water line is needed.
- Tall work, one machine. Pots, pans and sheet trays up to 27" tall fit, and it is certified for both pots and dishes at every cycle.
- Door stays shut until it is safe. An interlock holds the door closed through the vent stage.
- Cycle for every load. Choose 88, 138 or 268 seconds.
- Clear readouts. The LED display and onboard diagnostics keep staff and technicians informed.
Choosing your setup
Electrical: pick the voltage and phase above that match your service. The table shows the standard single-point connection. 460V three-phase and dual-point wiring are factory options.
| Electrical service | Total load | Min. circuit ampacity | Max. overcurrent protection |
|---|---|---|---|
| 208V / 1-Phase | 75.9 A | 78.9 A | 90.0 A |
| 208V / 3-Phase | 49.3 A | 52.3 A | 60.0 A |
| 230V / 1-Phase | 83.0 A | 85.8 A | 90.0 A |
| 230V / 3-Phase | 52.9 A | 55.6 A | 60.0 A |
Specifications
| Brand | Jackson |
| Model | DynaStar HH-E VER |
| Type | Ventless tall chamber high temperature door-type dishwasher with energy recovery |
| Racks per hour | 40 (38 at NSF load time) |
| Dishes / glasses per hour | 1,000 / 1,440 |
| Cycle times | 88, 138 or 268 seconds (each includes a 30-second vent) |
| Water use | 0.72 gal per rack Econo (0.89 Turbo); 28.80 gal per hour Econo |
| Wash / rinse temperature (min.) | 150°F / 180°F |
| Booster heater | Built-in, 40-70°F rise, 1.66 gal tank |
| Tank heat | Electric; 8.0 gal wash tank |
| Wash pump | 2 HP stainless steel |
| Chamber clearance | 27" |
| Incoming water | 40-90°F, 15-65 PSI, 1/2" NPT |
| Drain | 1-1/2" ID |
| Heat output | 6,047 BTU/hr latent; 5,834 BTU/hr sensible |
| Electrical options | 208V or 230V, 1- or 3-Phase |
| Dimensions (W x D x H) | 30-1/2" x 32-1/8" x 71-1/2" |
| Height with door open | 91-1/4" |
| Shipping weight | 411 lb |
| Certifications | ENERGY STAR®; NSF/ANSI 3 (ETL Sanitation) |
Before it arrives
- Check ceiling height: the raised door needs 91-1/4".
- Supply cold water at 40-90°F and 15-65 PSI. A pressure regulator is only needed above 65 PSI.
- Have a licensed electrician run a dedicated circuit from the table above. No hood is required, but confirm with your inspector.
- Leave 7/16" behind the machine. The crated unit weighs 411 lb and stands 77" tall.
What's included
- Front and side stainless steel dress panels
- Adjustable bullet feet
Warranty
One-year parts and labor warranty from Jackson.
Specifications per Jackson WWS data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
