Jackson Conserver XL-E-FL Low Temp Door-Type Dishwasher, 41 Racks/Hr, Front-Loading Design
No room for dish tables? The Jackson Conserver XL-E-FL loads from the front, so it can slot into a tight kitchen, bar or casino back room without the straight-through layout a standard door-type needs. It sanitizes chemically and runs on 115V power, making it an easy addition where space and utilities are limited.
It handles up to 41 racks per hour (30 at the NSF-rated load time for front-opening machines), or about 1,025 dishes or 1,476 glasses an hour. Each 87-second cycle uses 1.02 gallons of water per rack. Wash and rinse water need to be at least 120°F (140°F recommended), and inside clearance is 17-15/16".
What you will notice in day-to-day use
- Small footprint, full door-type capacity. At 25-1/4" wide, it washes a full rack without side tables.
- Fresh rinse water each cycle. The fill-and-dump system replaces the used wash water with a clean rinse every time.
- Starts when the door shuts. Load the rack, close the door and the cycle runs on its own.
- Product alerts. Built-in chemical pumps with priming switches do the dosing, and indicator lights flag low detergent or sanitizer.
- Stainless where it counts. A self-draining stainless steel pump stops soil and detergent carrying over into the rinse.
Choosing your setup
Power: this model runs on 115V single-phase power with a 10.0 A total load. Plan for a circuit with at least 12.5 A of ampacity and a 20 A maximum overcurrent device. Jackson lists a 230V version as an option.
Specifications
| Brand | Jackson |
| Model | Conserver XL-E-FL |
| Type | Front-loading low temperature chemical sanitizing door-type dishwasher |
| Racks per hour | 41 (30 at NSF load time for front-opening machines) |
| Dishes / glasses per hour | 1,025 / 1,476 |
| Cycle time | 87 seconds |
| Water use | 1.02 gal per rack; 41.82 gal per hour |
| Wash / rinse temperature | 120°F minimum, 140°F recommended |
| Booster heater | Not required (chemical sanitizing) |
| Wash pump | 1 HP self-draining stainless steel |
| Chamber clearance | 17-15/16" |
| Incoming water | 120°F min. (140°F recommended), 20 ± 5 PSI, 1/2" NPT |
| Drain | 2" NPT |
| Electrical | 115V / 1-Phase; 10.0 A total load |
| Dimensions (W x D x H) | 25-1/4" x 30-5/16" x 68-1/2" |
| Net / shipping weight | 215 lb / 240 lb |
| Certifications | ENERGY STAR®; NSF/ANSI 3 (ETL Sanitation) |
Before it arrives
- Ask a licensed electrician to install a dedicated 115V circuit that meets the ratings above.
- Provide water at 120°F or more and 20 ± 5 PSI. Jackson recommends a tank-type water heater and does not endorse tankless heaters for its machines.
- Keep 4" of wall clearance and leave open floor space in front for the door. The unit has an air gap instead of a vacuum breaker, plus adjustable bullet feet with flanged rear feet.
Warranty
One-year parts and labor warranty from Jackson.
Specifications per Jackson WWS data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
