Jackson AJX-66CEL Low Temp Conveyor Dishwasher, 209 Racks/Hr, 22" Pre-Wash, Chemical Sanitizing
For a high-volume dish room that runs on chemical sanitizing, the Jackson AJX-66CEL brings a 22" pre-wash and conveyor capacity without a booster heater. Everything runs at 140°F, which makes it a practical choice for schools, nursing care facilities and correctional kitchens working with limited hot water or electrical service.
Jackson rates it for 209 racks per hour (5,225 dishes or 7,524 glasses) at a top conveyor speed of 5.75 feet per minute. It uses 0.78 gallons per rack, about 163 gallons an hour. The pre-wash runs at 110-140°F, and the wash and chemical sanitizing rinse at 140°F minimum. Chamber clearance is a generous 25".
What you will notice in day-to-day use
- Scrapes before it washes. Two upper and one lower arm in the 22" pre-wash, driven by their own 1.0 HP pump, loosen heavy soil early.
- No booster to buy or wire. Chemical sanitizing at 140°F means no booster heater.
- Handles bulky pieces. Sheet pans and mixing bowls clear the 25" chamber.
- Adjustable for the mess. Adjust-A-Peak™ lets you slow the conveyor for longer wash and rinse contact.
- Uses less chemical. EnergyGuard™ controls operate the machine only when a rack is being washed or rinsed, cutting idle energy and chemical use.
Choosing your setup
Electrical: pick the voltage and phase above that match your service; 460V is listed as a factory option. Amperage figures were not in the Jackson data we had, so have your electrician size the circuit from the installation documents.
Direction: the conveyor runs left-to-right or right-to-left as you face the machine. Pick the direction above that suits your dish room layout.
Specifications
| Brand | Jackson |
| Model | AJX-66CEL |
| Type | Chemical sanitizing (low temperature) rack conveyor dishwasher, 22" pre-wash |
| Racks per hour | 209 |
| Dishes / glasses per hour | 5,225 / 7,524 |
| Conveyor speed (max.) | 5.75 ft/min |
| Water use | 0.78 gal/rack; 163.02 gal/hr; 2.74 GPM |
| Pre-wash / wash / rinse temp. | 110-140°F / 140°F min. / 140°F min. |
| Booster heater | Not required (chemical sanitizing) |
| Tank heat | Electric, 18 kW |
| Tank capacity | Pre-wash 17.25 gal; wash 21 gal |
| Pumps | Pre-wash 1.0 HP; wash 2.0 HP; drive 1/4 HP |
| Chamber clearance | 25" |
| Incoming water | 140°F min., 15 PSI, 3/4" NPT |
| Drain / venting | 1-1/2" NPT / 600 CFM total |
| Electrical options | 208V / 1-Phase, 208V / 3-Phase, 230V / 1-Phase, 230V / 3-Phase |
| Dimensions (W x D x H) | 84" x 25" x 75-1/2"; 66" between tables |
| Net / shipping weight | 800 lb / 1,000 lb |
| Certifications | NSF/ANSI 3 |
Before it arrives
- A licensed electrician should provide a dedicated circuit.
- Supply 140°F water at 15 PSI to the main inlet and 110-140°F water to the pre-wash inlet, and set up sanitizer and detergent with your chemical provider. Keep the 1-1/2" drain full size with an air gap.
- Exhaust is 200 CFM in and 400 CFM out. Allow for a 96" long crate of about 1,000 lb.
Warranty
One-year parts and labor warranty from Jackson.
Specifications per Jackson WWS data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
