Groen AH/1E-20 20 Gallon Steam Jacketed Kettle - Stationary, Natural Gas
Leveled once on its legs and left there, the AH/1E-20 holds 20 gallons for as long as the kitchen keeps it. A self-contained steam source under the vessel is fired on natural gas, so the kettle needs a fuel connection and ventilation but no boiler behind it. It is bought where the batch is made in quantity rather than to order.
The heat path runs from steam to wall to food, and the wall never exceeds the temperature of the steam behind it. The jacket is rated to 30 PSI maximum. The vessel does not tilt, so the batch is worked and emptied where it cooked and nothing in the mounting moves during a shift.
The body is type 316 stainless in one solid piece, so there is no lap joint inside to hold a residue. The wetted liner is 316 stainless, chosen for product that would pit a lighter grade over time. The cooking temperature is held by a thermostat, and a pressure gauge and indicator lights report what is happening inside, with a power switch behind them. It carries CSA, NSF and ASME listings.
The AH/1E-20 measures 26 Inch by 30-3/8 Inch and stands 29-7/8 Inch high, which is the floor area to mark out before anything else is placed. The site needs natural gas at the burner and extraction over the kettle. Nothing about it is movable afterwards, which makes the layout decision the important one.
Features
- 20 Gallons capacity — soup for a mid-size dining room.
- Type 316 stainless — the grade for stocks, brines and tomato.
- Self-contained gas steam source — no house boiler needed.
- Jacket safety valve — over-pressure relieved mechanically.
- 30 PSI maximum working pressure — a ceiling on the sheet.
- Stands 29-7/8 Inch high — clears a standard bench run.
- Adjustable feet — levelled on site for a gravity drain.
- Non-tilting — fewer moving parts, lower cost.
- ASME shop inspected and stamped — a certified pressure vessel.
- 115 V single-phase control supply — the small electrical load is stated.
Specifications
| Model | AH/1E-20 |
| Series | AH/1E gas stationary floor kettle |
| Category | Steam Jacketed Kettle |
| Capacity | 20 Gallons |
| Heat Source | Gas (self-contained steam source) |
| Voltage | 115 V |
| Phase | Single Phase |
| Amps | 2 A (60 Hz control supply) |
| Working Pressure | 30 PSI maximum |
| Tilt | Stationary (non-tilting) |
| Mount | Stationary floor kettle on 3 adjustable legs |
| Controls | Thermostat, pressure gauge, power switch, indicator lights, safety valve |
| Width | 26 Inch |
| Depth | 30-3/8 Inch |
| Height | 29-7/8 Inch |
| Construction | Type 316 stainless steel, solid one-piece construction |
| Liner | Type 316 stainless steel |
| Certifications | CSA, NSF, ASME |
Couldn't load pickup availability

