Dukers DSP72-18-S3 72" 3-Door Sandwich Prep Table, 18 Pans, 17.58 Cu. Ft., Stainless Steel

For the busiest cold lines, a six-foot prep table with three doors underneath is about as much station as one unit can give you. The Dukers DSP72-18-S3 lines up eighteen pans of ingredients over a long cutting board, with three refrigerated sections below for backup product. It is built for sub and deli chains, cafeterias, stadium concessions and catering kitchens that assemble food in volume.

The base holds 17.58 cubic feet between 33°F and 41°F, cooled by a 1/3 HP compressor on R290 natural refrigerant. Despite the size it runs on 115V at 3.4 amps (380 watts), and eighteen 1/6-size, 6" deep pans are included.

What you will notice in day-to-day use

• Three sections, three shelves. Each door opens onto its own section with a coated adjustable shelf that resists peeling and rust.
• A full assembly line. Eighteen pans and a 72" x 14-1/2" cutting board let several cooks build side by side.
• Doors that help you out. Self-closing doors stay open past 60° while you load and close on their own; hinges carry a lifetime warranty.
• Easy to keep clean. Stainless steel inside and out, sealed floors and rounded corners make daily wipe-downs fast.
• Accessible and mobile. The compressor sits at the back with a dust-resistant condenser, and 6" locking casters let you roll the unit out.

Specifications

Before it arrives

• Power: a standard 115V NEMA 5-15 outlet is all it needs; a dedicated circuit is best for refrigeration.
• Space: the listed width does not include about 1/5" on each side for the cutting board pins, and the depth does not include 1" for the rear bumpers, so allow a little extra when measuring your counter run.
• Delivery: it ships at about 76-3/4" x 35-7/8" x 48-3/8" and weighs 341 lb, so measure the route in.

Warranty

3 years parts and labor, plus 5 years on the compressor, from Dukers.

Specifications per Dukers data; subject to change by the manufacturer.