If you are building sandwiches, wraps or salads in a tight space, the Dukers DSP29-8-S1 gives you a full prep station in about 29 inches of floor. There is a refrigerated pan rail on top, a cutting board in front and a single-door cabinet below for backup stock. Delis, cafés, food trucks with room for a plug-in unit and small kitchens adding a cold station will get a lot out of it.
Inside is 6.56 cubic feet of storage kept between 33°F and 41°F by a 1/5 HP compressor using R290 natural refrigerant. It runs on 115V at 2.0 amps (225 watts), and eight 1/6-size, 6" deep pans come with it, ready to fill.
What you will notice in day-to-day use
- Everything in arm's reach. Eight pans across the top and a 29" x 14-1/2" cutting board below them make it a one-step-wide build station.
- A door that cooperates. The self-closing door stays open past 60° while you load, then swings shut on its own; the hinges have a lifetime warranty.
- Flexible storage below. A coated, adjustable shelf resists peeling and rust and can move to suit cases or deep containers.
- Clean-up is quick. Stainless steel inside and out, a sealed floor and rounded interior corners leave little for grime to cling to.
- Easy to service and move. The compressor sits at the back, easy to reach, and 6" locking casters let you roll it out to clean.
Specifications
| Brand | Dukers |
| Model | DSP29-8-S1 |
| Type | Refrigerated sandwich / salad prep table, 1 door |
| Capacity | 6.56 cu. ft. |
| Temperature range | 33°F – 41°F |
| Top rail | 8 x 1/6-size 6" deep plastic pans included |
| Cutting board | 29" x 14-1/2" |
| Door | 1 solid, self-closing with stay-open feature, recessed handle |
| Shelves | 1 coated adjustable shelf |
| Construction | Stainless steel interior and exterior |
| Controls | Digital, LED display |
| Compressor | 1/5 HP, rear-mounted |
| Refrigerant | R290 (2.82 oz) |
| Defrost | Automatic |
| Electrical | 115V / 60 Hz, 2.0 A, 225 W, NEMA 5-15P plug |
| Dimensions (W x D x H) | 29-1/8" x 31-1/2" x 44" (height includes casters) |
| Shipping dimensions (W x D x H) | 33-3/8" x 35-7/8" x 48-3/8" |
| Net weight | 202 lb |
| Mobility | 6" locking swivel casters |
| Ambient rating | Up to 100.4°F |
| Certifications | ETL Listed, ETL Sanitation, NSF/ANSI 7 |
Before it arrives
- Power: a standard 115V NEMA 5-15 outlet is all it needs; a dedicated circuit is best for refrigeration.
- Space: the listed width does not include about 1/5" on each side for the cutting board pins, and the depth does not include 1" for the rear bumpers, so allow a little extra when measuring your counter run.
- Delivery: it ships at about 33-3/8" x 35-7/8" x 48-3/8" and weighs 202 lb, so measure the route in.
Warranty
3 years parts and labor, plus 5 years on the compressor, from Dukers.
Specifications per Dukers data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

