Big pots of stock, soup, pho broth, chili or boiling pasta water tie up a range burner for hours. A dedicated stock pot range moves that work to the floor, where heavy pots are easier and safer to handle. The Dukers DCSPA1 is a single-burner unit for restaurants, ramen and pho shops, and catering kitchens that keep a big pot going all day.
Its heavy-duty cast iron three-ring burner is rated at a total of 80,000 BTU/hr, listed by Dukers as two 40,000 BTU/hr sections with inner and outer rings on separate manual controls. The cooking area is 18" x 18", and the unit measures 18" wide by 24-1/4" deep. Adjustable stainless steel legs set the height anywhere from 22-3/4" to 24-1/2".
What you will notice in day-to-day use
- From simmer to rolling boil. Separate controls for the inner and outer rings let you run just the center for a gentle simmer or both for maximum heat.
- Always ready to light. Two continuous pilots on the burner, with stainless steel pilot tubing, keep ignition simple.
- Built to carry weight. Heavy-duty cast iron grates support large, full stock pots.
- Set the working height. Adjustable stainless steel legs raise or lower the top between 22-3/4" and 24-1/2".
- Easy clean-up. A full-length seamless drip pan catches boil-overs.
Choosing your setup
Gas type: the stock pot range works on natural gas or propane, and a regulator comes standard. Choose the gas your kitchen uses above so it is set up correctly.
| Gas | Gas pressure | Orifice |
|---|---|---|
| Natural gas | 5" W.C. | #32 |
| Liquid propane | 10" W.C. | #48 |
Specifications
| Brand | Dukers |
| Model | DCSPA1 |
| Type | Gas stock pot range, single burner, on legs |
| Burners | 1 cast iron three-ring burner (inner and outer rings; Dukers lists 2 x 40,000 BTU/hr) |
| Total input | 80,000 BTU/hr |
| Controls | Manual; inner and outer rings controlled independently |
| Pilots | 2 continuous standing pilots per burner, stainless steel pilot tubing |
| Cooking area | 18" x 18" |
| Grates | Heavy-duty cast iron |
| Drip pan | Full-length, seamless |
| Construction | Stainless steel sides, front valve cover and legs |
| Gas pressure | 5" W.C. natural gas / 10" W.C. propane |
| Gas connection | 3/4" NPT, rear, regulator included |
| Dimensions (W x D x H) | 18" x 24-1/4" x 22-3/4" |
| Height adjustment | 22-3/4" to 24-1/2" with adjustable stainless steel legs |
Before it arrives
- Gas: 3/4" NPT connection at the rear, with a regulator included. Have a qualified installer make the connection.
- Ventilation: install under a commercial exhaust hood, as your local code requires.
- Floor and space: it sits on the floor at 24-1/4" deep; full stock pots are heavy, so place it where the floor is level and there is room to lift and pour safely.
Warranty
1 year parts and labor from Dukers.
Specifications per Dukers data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

