Dukers DCGMA12 12" Heavy Duty Manual Countertop Gas Griddle, 1" Steel Plate, 29,000 BTU
The DCGMA12 is the heavy-duty version of the Dukers 12-inch griddle, with a full 1-inch steel plate and a deeper cooking surface. It is a smart pick for a small kitchen that wants a dedicated spot for eggs, smash burgers or quesadillas, and wants that spot to hold its heat under pressure.
A single 29,000 BTU/hr burner sits under the 1" polished steel plate, which gives you an 11.85" x 24" cooking area. The unit is 12" wide, 33-1/2" deep and 15-1/4" high, and weighs about 165 lb.
What you will notice in day-to-day use
- One burner, simple control. A single manual control runs the whole 12" plate, so there is nothing to program and very little to go wrong.
- Steady heat, edge to edge. A heavy 1" polished steel plate spreads the burner heat out and keeps it there, for fewer cold spots across the 11.85" x 24" cooking surface.
- Ready at the turn of a knob. Standby pilots keep every burner ready to light when the first order comes in.
- Easy grease management. A full-length seamless drip pan catches grease along the whole plate and lifts out for emptying and cleaning.
- Stainless, adjustable, solid. The stainless steel exterior and interior stand up to daily scrubbing, and adjustable stainless steel legs take the height from 15-1/4" up to 17-5/8".
Choosing your setup
Gas type: it runs on natural gas or LP; pick yours above. Every unit ships set for natural gas with an LP conversion kit in the box, and the conversion should be done by a qualified gas technician.
| Gas | Each burner | Total input | Gas pressure | Nozzle |
|---|---|---|---|---|
| Natural gas | 29,000 BTU/hr | 29,000 BTU/hr | 4" W.C. | #37 |
| Liquid propane | 29,000 BTU/hr | 29,000 BTU/hr | 10" W.C. | #51 |
Specifications
| Brand | Dukers |
| Model | DCGMA12 |
| Type | Countertop gas griddle, manual controls |
| Burners | 1 x 29,000 BTU/hr, standby pilot |
| Total input | 29,000 BTU/hr |
| Controls | Manual control |
| Griddle plate | 1" thick polished steel |
| Cooking area | 11.85" x 24" |
| Gas type | Ships for natural gas; LP conversion kit included |
| Gas connection | 3/4" NPT |
| Construction | Stainless steel exterior and interior |
| Legs | Adjustable, 15-1/4" – 17-5/8" high |
| Dimensions (W x D x H) | 12" x 33-1/2" x 15-1/4" |
| Net weight | 165 lb |
| Shipping weight | 180 lb |
Before it arrives
- Gas: 3/4" NPT inlet; a qualified installer should connect it and fit the LP kit if needed.
- Ventilation: install it under a commercial hood following your local code.
- Counter or stand: 12" wide and 33-1/2" deep, about 165 lb, so use a sturdy, non-combustible counter or stand and keep the clearances in the installation manual.
Warranty
1 year parts and labor from Dukers.
Specifications per Dukers data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
