Dukers DCGM36 36" Manual Countertop Gas Griddle, 3/4" Steel Plate, 3 Burners, 90,000 BTU

If your griddle is the busiest station in the kitchen, three feet of plate gives the crew room to breathe. The Dukers DCGM36 is a 36-inch manual countertop griddle for diners, breakfast spots and burger joints that cook a lot of product at once.

Three 30,000 BTU/hr burners deliver 90,000 BTU/hr to a 3/4" polished steel plate with 35.86" x 20.50" of cooking space. It is 36" wide, 30" deep and 15-1/4" high, and weighs about 245 lb.

What you will notice in day-to-day use

• Heavy plate, even results. 3/4" thick polished steel gives you the mass for consistent browning on pancakes, patties and grilled sandwiches alike.
• Simple, reliable controls. Manual valves every 12" are easy for any cook to learn, and each section adjusts on its own.
• Quick to fire up. Standby pilots on each burner mean lighting up in the morning takes seconds.
• Cleanup that does not drag on. The full-length seamless drip pan pulls out and washes easily, and the stainless steel body wipes down at closing.
• Fits your setup. Adjustable stainless steel legs raise the griddle from 15-1/4" to 17-5/8", and the stainless steel body is easy to keep clean.

Choosing your setup

Gas type: choose natural gas or LP above to match your kitchen. Dukers ships each griddle set for natural gas and includes the LP conversion kit; per-gas values are below.

Specifications

Before it arrives

• Gas: 3/4" NPT inlet; a qualified installer should connect it and fit the LP kit if needed.
• Ventilation: install it under a commercial hood following your local code.
• Counter or stand: 36" wide and 30" deep, about 245 lb, so use a sturdy, non-combustible counter or stand and keep the clearances in the installation manual.

Warranty

1 year parts and labor from Dukers.

Specifications per Dukers data; subject to change by the manufacturer.