Beverage-Air WTRD72AHC-2 72" Worktop Two Drawer Two Door Refrigerator, 17.9 Cu. Ft.

The Beverage-Air WTRD72AHC-2 is a 72" worktop refrigerator that does two jobs: a stainless steel work surface on top and 17.9 cu. ft. of cold storage below.

It measures 72" wide, 32" deep and 39-5/8" tall with two doors and two drawers. Inside you get 17.9 cu. ft. of net capacity. The cabinet holds 36°F to 38°F and runs on a standard 115V circuit with a NEMA 5-15P plug.

What you will notice in day-to-day use

• Natural R290 refrigerant: The system runs on hydrocarbon R290, an efficient refrigerant that keeps the unit compliant with current DOE, EPA SNAP and CARB rules.
• Easy-to-read electronic control: A digital controller shows the cabinet temperature at a glance and makes setpoint changes simple for any shift.
• Built-in thermometer: An interior thermometer lets staff confirm temperature at a glance during line checks.
• Doors that stay put: Self-closing doors swing shut on their own, and a stay-open stop holds them open while you load or restock.
• Smart defrost: Adaptive defrost runs only when the coil needs it, which saves energy and avoids unnecessary temperature swings.
• Heavy-duty drawers: Drawers ride on stainless steel slides that pull out smoothly under load and lock in place so they cannot be yanked off by accident.

Choosing your setup

You can order this unit with a standard removable backsplash, a foamed-in backsplash, or a flat top with no backsplash. Choose with the Top selector above.

Specifications

Before it arrives

• Have a dedicated 115V outlet ready that matches the NEMA 5-15P plug on the 8' cord.
• Leave the clearance Beverage-Air specifies: 3" Bottom & 2" Rear.
• Check your counter height: the unit stands 39-5/8" tall as shipped.
• Units are shipped self-contained; a remote refrigeration option is available from the factory and must be specified when ordering.
• Measure doorways and hallways on the delivery path against the cabinet size before it arrives.

Factory Options (Additional Cost)

• Stainless steel back
• Stainless steel interior
• 16 Gauge stainless steel top
• Additional shelves
• Shelf clips
• Right or left hinged door
• Locks (solid doors only)
• Bun rack
• Wire shelf divider
• Cutting board
• 3” Casters
• 6” legs (stainless steel, black or seismic/flange)
• Low profile casters
• Roller kit

Warranty

7 year warranty on parts, labor, and compressor from Beverage-Air.

Specifications per Beverage-Air data; subject to change by the manufacturer.