Beverage-Air WTRD36AHC-2 36" Worktop Two Drawer Refrigerator, 8.5 Cu. Ft.

The Beverage-Air WTRD36AHC-2 turns a stretch of floor into a prep station: a 36" worktop refrigerator with a durable stainless top and 8.5 cu. ft. of storage below.

It measures 36" wide, 32" deep and 39-5/8" tall with two drawers. Inside you get 8.5 cu. ft. of net capacity. The cabinet holds 36°F to 38°F and runs on a standard 115V circuit with a NEMA 5-15P plug.

What you will notice in day-to-day use

• Natural R290 refrigerant: The system runs on hydrocarbon R290, an efficient refrigerant that keeps the unit compliant with current DOE, EPA SNAP and CARB rules.
• Easy-to-read electronic control: A digital controller shows the cabinet temperature at a glance and makes setpoint changes simple for any shift.
• Stainless steel top: The stainless steel top gives you a sturdy, sanitary surface for prep, equipment or service.
• Smart defrost: Adaptive defrost runs only when the coil needs it, which saves energy and avoids unnecessary temperature swings.
• Coated evaporator coil: An epoxy-coated evaporator coil resists corrosion from acidic foods and humid kitchens, helping the system last.
• Heavy-duty drawers: Drawers ride on stainless steel slides that pull out smoothly under load and lock in place so they cannot be yanked off by accident.

Choosing your setup

You can order this unit with a standard removable backsplash, a foamed-in backsplash, or a flat top with no backsplash. Choose with the Top selector above.

Specifications

Before it arrives

• Have a dedicated 115V outlet ready that matches the NEMA 5-15P plug on the 8' cord.
• Leave the clearance Beverage-Air specifies: 3" Bottom & 2" Rear.
• Allow about 47-1/2" of depth in front for drawers fully extended.
• Check your counter height: the unit stands 39-5/8" tall as shipped.
• Units are shipped self-contained; a remote refrigeration option is available from the factory and must be specified when ordering.
• Measure doorways and hallways on the delivery path against the cabinet size before it arrives.

Factory Options (Additional Cost)

• Stainless steel back
• Stainless steel interior
• 16 Gauge stainless steel top
• Cutting board
• 3” Casters
• 6” Legs (stainless steel, black or seismic/flange)
• Low profile casters
• Roller kit
• Remote option

Warranty

7 year warranty on parts, labor, and compressor from Beverage-Air.

Specifications per Beverage-Air data; subject to change by the manufacturer.