Beverage-Air WTFD32AHC-2 32" Worktop Two Drawer Freezer, 7.2 Cu. Ft.

Need prep space and cold storage in the same spot? The Beverage-Air WTFD32AHC-2 gives you a 32" stainless steel worktop with 7.2 cu. ft. of refrigerated storage underneath.

It measures 32" wide, 32" deep and 39-1/2" tall with two drawers. Inside you get 7.2 cu. ft. of net capacity. The cabinet holds down to -10°F and runs on a standard 115V circuit with a NEMA 5-15P plug.

What you will notice in day-to-day use

• Natural R290 refrigerant: The system runs on hydrocarbon R290, an efficient refrigerant that keeps the unit compliant with current DOE, EPA SNAP and CARB rules.
• Smart defrost: Adaptive defrost runs only when the coil needs it, which saves energy and avoids unnecessary temperature swings.
• Stainless steel top: The stainless steel top gives you a sturdy, sanitary surface for prep, equipment or service.
• Coated evaporator coil: An epoxy-coated evaporator coil resists corrosion from acidic foods and humid kitchens, helping the system last.
• Heavy-duty drawers: Drawers ride on stainless steel slides that pull out smoothly under load and lock in place so they cannot be yanked off by accident.
• Rolls out for cleaning: Casters with locking brakes let you roll the unit out to clean behind and under it, then lock it in place.

Choosing your setup

You can order this unit with a standard removable backsplash, a foamed-in backsplash, or a flat top with no backsplash. Choose with the Top selector above.

Specifications

Before it arrives

• Have a dedicated 115V outlet ready that matches the NEMA 5-15P plug on the 8' cord.
• Leave the clearance Beverage-Air specifies: 3" Bottom & 2" Rear.
• Allow about 48-1/2" of depth in front for drawers fully extended.
• Check your counter height: the unit stands 39-1/2" tall as shipped.
• Units are shipped self-contained; a remote refrigeration option is available from the factory and must be specified when ordering.
• Measure doorways and hallways on the delivery path against the cabinet size before it arrives.

Factory Options (Additional Cost)

• Stainless steel back and grille
• Stainless steel interior
• Cutting board
• 3” Casters
• 6” legs (stainless steel, black or seismic/flange)
• Low profile casters
• Remote option

Warranty

7 year warranty on parts, labor, and compressor from Beverage-Air.

Specifications per Beverage-Air data; subject to change by the manufacturer.