Build orders faster with the Beverage-Air SPED72HC-24M-6, a 72" sandwich prep table that keeps toppings cold in the rail and restock below in 20 cu. ft. of refrigerated storage.
It measures 72" wide, 38-3/8" deep and 49" tall with six drawers. Inside you get 20 cu. ft. of net capacity and room for 24 1/6 size pans on top. The cabinet holds 36°F to 38°F and runs on a standard 115V circuit with a NEMA 5-15P plug.
What you will notice in day-to-day use
- Natural R290 refrigerant: The system runs on hydrocarbon R290, an efficient refrigerant that keeps the unit compliant with current DOE, EPA SNAP and CARB rules.
- Safe rail temperatures: Airflow across the rail keeps product in open pans below 41°F, so ingredients stay food safe through a busy service.
- Removable cutting board: The full-length polyethylene cutting board lifts out for washing at the sink.
- Smart defrost: Adaptive defrost runs only when the coil needs it, which saves energy and avoids unnecessary temperature swings.
- Heavy-duty drawers: Drawers ride on stainless steel slides that pull out smoothly under load and lock in place so they cannot be yanked off by accident.
- Tool-free gaskets: Magnetic gaskets snap in by hand, so cleaning or replacing a worn seal takes minutes, not a service call.
Specifications
| Model | SPED72HC-24M-6 |
| Type | Sandwich prep table |
| Exterior Dimensions (W x D x H) | 72" x 38-3/8" x 49" |
| Net Capacity | 20 cu. ft. |
| Drawers | 6 |
| Pan Capacity | (24) 1/6 size |
| Cutting Board Depth | 10" |
| Temperature | 36°F to 38°F |
| Compressor Location | Rear mounted |
| Exterior | Stainless steel with galvanized back & bottom |
| Interior | Corrosion resistant aluminum |
| Refrigerant | R290 (hydrocarbon) |
| Electrical | 115/60/1, 5.4 amps, NEMA 5-15P plug |
| Compressor | 1/3 HP |
| Shipping Weight (crated) | 496 lbs. |
| Warranty | 7 year warranty on parts, labor, and compressor |
Before it arrives
- Have a dedicated 115V outlet ready that matches the NEMA 5-15P plug on the 8' cord.
- Leave the clearance Beverage-Air specifies: 3" Bottom & 2" Rear.
- Allow about 57-7/8" of depth in front for drawers fully extended.
- Units are shipped self-contained; a remote refrigeration option is available from the factory and must be specified when ordering.
- Measure doorways and hallways on the delivery path against the cabinet size before it arrives.
Factory Options (Additional Cost)
- Stainless steel back
- Stainless steel interior
- Clear lid
- Overshelves (single or double)
- Crumb catcher kit
- Richlite cutting board
- Night cover
- Bottle organizer
- Bun rack
- Epoxy coated shelves
- Shelf clips
- Shelf dividers
- Pan supports
- Pan support crossbar
Warranty
7 year warranty on parts, labor, and compressor from Beverage-Air.
Specifications per Beverage-Air data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

