The Beverage-Air SPE60HC-S is a 60-5/8" refrigerated salad bar built to keep sandwich and salad lines moving. Ingredients sit in a refrigerated rail up top, with 16 cu. ft. of backup storage underneath.
It measures 60-5/8" wide, 30-1/8" deep and 36-7/8" tall with two doors. Inside you get 16 cu. ft. of net capacity, 4 shelves and room for 4" Deep 12 1/3 size pans on top. The cabinet holds 36°F to 38°F and runs on a standard 115V circuit with a NEMA 5-15P plug.
What you will notice in day-to-day use
- Natural R290 refrigerant: The system runs on hydrocarbon R290, an efficient refrigerant that keeps the unit compliant with current DOE, EPA SNAP and CARB rules.
- Smart defrost: Adaptive defrost runs only when the coil needs it, which saves energy and avoids unnecessary temperature swings.
- Reversible doors: Doors can be re-hung in the field to suit your floor plan.
- Coated evaporator coil: An epoxy-coated evaporator coil resists corrosion from acidic foods and humid kitchens, helping the system last.
- Doors that stay put: Self-closing doors swing shut on their own, and a stay-open stop holds them open while you load or restock.
- Clean, durable interior: The corrosion-resistant aluminum liner is easy to wipe down and resists dents and stains.
Specifications
| Model | SPE60HC-S |
| Type | Refrigerated salad bar |
| Exterior Dimensions (W x D x H) | 60-5/8" x 30-1/8" x 36-7/8" |
| Net Capacity | 16 cu. ft. |
| Doors | 2 |
| Shelves | 4 |
| Pan Capacity | 4" Deep (12) 1/3 size |
| Temperature | 36°F to 38°F |
| Compressor Location | Rear mounted |
| Exterior | Stainless steel with galvanized back & bottom |
| Interior | Corrosion resistant aluminum |
| Refrigerant | R290 (hydrocarbon) |
| Electrical | 115/60/1, 5.4 amps, NEMA 5-15P plug |
| Compressor | 1/3 HP |
| Shipping Weight (crated) | 352 lbs. |
| Warranty | 7 year warranty on parts, labor, and compressor |
Before it arrives
- Have a dedicated 115V outlet ready that matches the NEMA 5-15P plug on the 8' cord.
- Leave the clearance Beverage-Air specifies: 3" bottom & 2" rear.
- Allow about 53-3/8" of depth in front for doors open at 90°.
- Measure doorways and hallways on the delivery path against the cabinet size before it arrives.
Factory Options (Additional Cost)
- Stainless steel exterior with finished back
- Stainless steel interior
- Sneeze guard panel for dual side service
- Sneed guard panel for single side service
- Foldable tray slides
- Door locks
- 3” casters or 6” legs
- Low profile casters
- Shelf dividers
- Pan Supports
Warranty
7 year warranty on parts, labor, and compressor from Beverage-Air.
Specifications per Beverage-Air data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

