The Beverage-Air SPE36HC-10 is a 36" sandwich prep table built to keep sandwich and salad lines moving. Ingredients sit in a refrigerated rail up top, with 10.1 cu. ft. of backup storage underneath.
It measures 36" wide, 32" deep and 45" tall with two doors. Inside you get 10.1 cu. ft. of net capacity, 4 shelves and room for 10 1/6 size pans on top. The cabinet holds 36°F to 38°F and runs on a standard 115V circuit with a NEMA 5-15P plug.
What you will notice in day-to-day use
- Natural R290 refrigerant: The system runs on hydrocarbon R290, an efficient refrigerant that keeps the unit compliant with current DOE, EPA SNAP and CARB rules.
- Safe rail temperatures: Airflow across the rail keeps product in open pans below 41°F, so ingredients stay food safe through a busy service.
- Tool-free gaskets: Magnetic gaskets snap in by hand, so cleaning or replacing a worn seal takes minutes, not a service call.
- Smart defrost: Adaptive defrost runs only when the coil needs it, which saves energy and avoids unnecessary temperature swings.
- Easy-to-read electronic control: A digital controller shows the cabinet temperature at a glance and makes setpoint changes simple for any shift.
- Clean, durable interior: The corrosion-resistant aluminum liner is easy to wipe down and resists dents and stains.
Specifications
| Model | SPE36HC-10 |
| Type | Sandwich prep table |
| Exterior Dimensions (W x D x H) | 36" x 32" x 45" |
| Net Capacity | 10.1 cu. ft. |
| Doors | 2 |
| Shelves | 4 |
| Pan Capacity | (10) 1/6 size |
| Cutting Board Depth | 10" |
| Temperature | 36°F to 38°F |
| Compressor Location | Rear mounted |
| Exterior | Stainless steel with galvanized back & bottom |
| Interior | Corrosion resistant aluminum |
| Refrigerant | R290 (hydrocarbon) |
| Electrical | 115/60/1, 2 amps, NEMA 5-15P plug |
| Compressor | 1/6 HP |
| Shipping Weight (crated) | 252 lbs. |
| Warranty | 7 year warranty on parts, labor, and compressor |
Before it arrives
- Have a dedicated 115V outlet ready that matches the NEMA 5-15P plug on the 8' cord.
- Leave the clearance Beverage-Air specifies: 3" Bottom & 2" Rear.
- Units are shipped self-contained; a remote refrigeration option is available from the factory and must be specified when ordering.
- Measure doorways and hallways on the delivery path against the cabinet size before it arrives.
Factory Options (Additional Cost)
- Stainless steel back
- Stainless steel interior
- Left hinged door (at time of order)
- Clear lid
- Door lock
- Overshelves (single or double)
- Crumb catcher kit
- Richlite cutting board
- Night cover
- Epoxy coated shelves
- Shelf clips
- Shelf dividers
- Bottle organizer
- Bun rack
Warranty
7 year warranty on parts, labor, and compressor from Beverage-Air.
Specifications per Beverage-Air data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

