For delis, sub shops and salad concepts, the Beverage-Air SPE36HC-08-CL is a 36" sandwich prep table that keeps everything for the build within arm's reach.
It measures 36" wide, 38-1/4" deep and 50-1/2" tall with two doors. Inside you get 10 cu. ft. of net capacity, 4 shelves and room for 8 1/6 size pans on top. The cabinet holds 36°F to 38°F and runs on a standard 115V circuit.
What you will notice in day-to-day use
- Natural R290 refrigerant: The system runs on hydrocarbon R290, an efficient refrigerant that keeps the unit compliant with current DOE, EPA SNAP and CARB rules.
- Safe rail temperatures: Airflow across the rail keeps product in open pans below 41°F, so ingredients stay food safe through a busy service.
- Smart defrost: Adaptive defrost runs only when the coil needs it, which saves energy and avoids unnecessary temperature swings.
- Easy-to-read electronic control: A digital controller shows the cabinet temperature at a glance and makes setpoint changes simple for any shift.
- Doors that stay put: Self-closing doors swing shut on their own, and a stay-open stop holds them open while you load or restock.
- Tool-free gaskets: Magnetic gaskets snap in by hand, so cleaning or replacing a worn seal takes minutes, not a service call.
Specifications
| Model | SPE36HC-08-CL |
| Type | Sandwich prep table |
| Exterior Dimensions (W x D x H) | 36" x 38-1/4" x 50-1/2" |
| Net Capacity | 10 cu. ft. |
| Doors | 2 |
| Shelves | 4 |
| Pan Capacity | (8) 1/6 size |
| Temperature | 36°F to 38°F |
| Compressor Location | Rear mounted |
| Exterior | Stainless steel with galvanized back & bottom |
| Interior | Corrosion resistant aluminum |
| Refrigerant | R290 (hydrocarbon) |
| Electrical | 115/60/1, 2.0 amps |
| Compressor | 1/6 HP |
| Shipping Weight (crated) | 242 lbs. |
| Warranty | 7 year warranty on parts, labor, and compressor |
Before it arrives
- Plan for a 115/60/1 electrical connection near the installation spot.
- Leave the clearance Beverage-Air specifies: 3 3/16" bottom & 2" rear.
- Units are shipped self-contained; a remote refrigeration option is available from the factory and must be specified when ordering.
- Measure doorways and hallways on the delivery path against the cabinet size before it arrives.
Factory Options (Additional Cost)
- Stainless steel back
- Stainless steel interior
- Left hinged door (at time of order)
- Door lock
- Crumb catcher kit
- Richlite cutting board
- Epoxy coated shelves
- Shelf clips
- Shelf dividers
- Bottle organizer
- Bun rack
- Pan supports
- Pan support crossbar
- Pan configuration
Warranty
7 year warranty on parts, labor, and compressor from Beverage-Air.
Specifications per Beverage-Air data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

