The Beverage-Air DPD119HC-4 is a 119" pizza prep table that gives pizza makers a deep cutting board, a refrigerated topping rail and 42.2 cu. ft. of storage below.
It measures 119" wide, 38-1/8" deep and 54-3/8" tall with two doors and four drawers. Inside you get 42.2 cu. ft. of net capacity and room for 5 full & 1 third pans on top. The cabinet holds 36°F to 38°F and runs on a standard 115V circuit with a NEMA 5-15P plug.
What you will notice in day-to-day use
- Natural R290 refrigerant: The system runs on hydrocarbon R290, an efficient refrigerant that keeps the unit compliant with current DOE, EPA SNAP and CARB rules.
- Smart defrost: Adaptive defrost runs only when the coil needs it, which saves energy and avoids unnecessary temperature swings.
- Reversible doors: Doors can be re-hung in the field to suit your floor plan.
- Insulated hood: A matching stainless steel hood covers the rail between shifts to hold cold and keep the pans clean.
- Coated evaporator coil: An epoxy-coated evaporator coil resists corrosion from acidic foods and humid kitchens, helping the system last.
- Clean, durable interior: The corrosion-resistant aluminum liner is easy to wipe down and resists dents and stains.
Specifications
| Model | DPD119HC-4 |
| Type | Pizza prep table |
| Exterior Dimensions (W x D x H) | 119" x 38-1/8" x 54-3/8" |
| Net Capacity | 42.2 cu. ft. |
| Doors | 2 |
| Drawers | 4 |
| Shelves | 4 |
| Pan Capacity | 5 full & 1 third |
| Cutting Board Depth | 19" |
| Temperature | 36°F to 38°F |
| Compressor Location | Side mounted |
| Exterior | Stainless steel with galvanized back & bottom |
| Interior | Corrosion-resistant aluminum |
| Refrigerant | R290 (hydrocarbon) |
| Electrical | 115/60/1, 7.8 amps, NEMA 5-15P plug |
| Compressor | 1/2 HP |
| Shipping Weight (crated) | 724 lbs. |
| Warranty | 7 year warranty on parts, labor, and compressor |
Before it arrives
- Have a dedicated 115V outlet ready that matches the NEMA 5-15P plug on the 8' cord.
- Leave the clearance Beverage-Air specifies: 3" Bottom & 2" Rear.
- Allow about 58-1/8" of depth in front for doors open at 90°.
- Units are shipped self-contained; a remote refrigeration option is available from the factory and must be specified when ordering.
- Measure doorways and hallways on the delivery path against the cabinet size before it arrives.
Factory Options (Additional Cost)
- Stainless steel back
- Stainless steel interior
- Clear lid
- Overshelf kits
- Additional shelves
- Shelf clips
- Pan support
- Door locks
- Composite cutting board
- Thermometer
- Night cover
- Bun tray rack
- 6" Casters
- 6” Legs black or seismic/flanged
Warranty
7 year warranty on parts, labor, and compressor from Beverage-Air.
Specifications per Beverage-Air data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability

