MagiKitch'n MKG-60 60" Countertop Griddle, 1" Thick Polished Plate, Snap Action Thermostats, 150,000 BTU
Five feet of flat top is a serious production tool, and the MagiKitch'n MKG-60 is built for exactly that. With a 1-inch thick polished plate and five thermostat zones, it suits banquet and catering kitchens, large cafeterias, casinos and the busiest breakfast restaurants that need to cook a lot of food in one place.
Ten stainless steel venturi burners, 15,000 BTU/hr every 6 inches, add up to 150,000 BTU/hr. Five snap action thermostats, one every 12 inches, hold the plate between 200°F and 450°F across a 59-3/4" wide by 24" deep cooking surface.
What you will notice in day-to-day use
- Biggest surface in the series. Nearly 60" of usable steel means more pancakes, more patties and more grilled sandwiches per batch.
- Five zones to manage the load. Run each 12" section at its own temperature, or turn zones off in slow periods to cut gas use.
- Controls anyone can run. Snap action thermostats and a recessed piezo spark ignitor make it easy to light and set, and each pilot has a flame loss safety shutoff.
- Even heat, plenty of it. All-stainless independent venturi burners every 6" and a 1" thick plate keep heat steady from end to end.
- Grease management sized for the job. A spatula-wide 3-1/2" front trough and welded chute drain into a 3.75 gallon grease box with splash zone compartment.
Choosing your setup
Gas type: this griddle is offered for natural gas or liquid propane (LP); choose the gas your kitchen uses above. The gas regulator and shutoff come factory installed. Burner and supply pressures for each gas are below.
| Gas | Burner pressure | Supply pressure |
|---|---|---|
| Natural gas | 4" W.C. | 7" – 14" W.C. |
| Liquid propane | 10" W.C. | 12" – 14" W.C. |
Need a smaller size? The MKG series also comes in 24", 36" and 48" widths, and those sizes are available with electric or solid state thermostats.
Specifications
| Brand | MagiKitch'n |
| Model | MKG-60 |
| Type | Countertop gas griddle, snap action thermostat controls |
| Total input | 150,000 BTU/hr |
| Burners | 10 all-stainless independent venturi burners, 15,000 BTU/hr every 6" |
| Controls | 5 snap action thermostats (one every 12"), 200°F – 450°F |
| Ignition | Piezo spark ignitor (push-button pilot lighting); safety pilot with flame loss shutoff (one pilot per up to two zones) |
| Griddle plate | 1" thick polished steel |
| Cooking area | 59-3/4" W x 24" D |
| Grease management | 3-1/2" spatula-wide front trough, fully welded chute, 3.75 gal grease box (left) with splash zone compartment |
| Construction | Double-walled stainless steel sides, tapered splash back, extra smooth 11 ga. skirting, solid-panel cabinet base, no exposed fasteners |
| Legs | 4", removable for flush mounting |
| Gas connection | 3/4" |
| Dimensions (W x D x H) | 60" x 31-9/16" x 23-9/32" |
| Net weight | 700 lb |
| Shipping weight | 750 lb (approx.) |
| Certifications | CSA Flame, CSA Star, NSF, CE, Made in USA |
Before it arrives
- Gas: 3/4" gas connection; a qualified installer should size the supply line to hold burner pressure with every appliance on full.
- Ventilation: install under a commercial hood following local code, and do not block the flue or place hood drains over it.
- Clearance: keep 6" at the rear and 2" at the sides from combustible surfaces (0" sides next to non-combustible). If you mount it on a stand with casters, use a flexible gas hose with a restraint.
- Delivery: ships crated at about 750 lb (75" x 45" x 40"); stands ship separately.
Warranty
2 years parts and labor from MagiKitch'n.
Specifications per MagiKitch'n data; subject to change by the manufacturer.
Warranty
Couldn't load pickup availability
