{"product_id":"univex-sfg600tmm-reversible-dough-sheeter-floor-model","title":"Univex SFG600TMM Reversible Dough Sheeter, Floor Model, 23.75\" Belt, 1 HP","description":"\u003cp\u003eThe Univex SFG600TMM pairs the 23.75\" wide belt with a full 1 hp chain drive and the longest tables in the 600 series short of the TL — 24\" × 63\" a side. It stands 72.8\" tall, occupies 35.4\" × 56\", and weighs 573 lbs.\u003c\/p\u003e\u003ch3\u003eWhere the extra horsepower goes\u003c\/h3\u003e\u003cp\u003eAgainst the SFG600TM, this machine keeps the belt width and adds a third again more motor: 1.00 hp against 0.75, drawing 4.48–9.11 amps against 2.60–7.35. Nothing about the cylinders, the thickness range or the reduction method changes. What changes is what the machine will take without complaining.\u003c\/p\u003e\u003cp\u003eA stiff, cold, low-hydration dough resists the cylinders hard, and the resistance rises as the gap closes. On the smaller motor that shows up as the drive labouring on the final passes; on this one it does not. For a bakery whose dough comes out of a retarder at 40°F and goes straight to the sheeter, that is the difference worth paying for — not speed, but the last two passes behaving like the first two.\u003c\/p\u003e\u003ch3\u003e63\" tables, and the frame that comes with them\u003c\/h3\u003e\u003cp\u003eThe tables step up to 24\" × 63\" a side, and the machine grows with them: 72.8\" tall rather than 61.4\", the same taller frame the TL uses. The folded length is published at 63\" (160 cm), and a sheet at full width and length is supported from cylinders to table end without a hand under it.\u003c\/p\u003e\u003cp\u003eThis is also the point in the range where the difference from the flagship narrows to two things. The TL shares this machine’s 1 hp motor and 72.8\" frame; what it adds is longer tables again and the cutting roller option. If cut strips are not part of the job, the TMM does the same sheeting work.\u003c\/p\u003e\u003ch3\u003eWhy Operators Choose It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 hp on the wide belt.\u003c\/strong\u003e A third more motor than the SFG600TM, at the same 23.75\" working width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24\" × 63\" tables.\u003c\/strong\u003e Sixteen inches more a side than the TM, for longer sheets supported end to end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFolds to 63\" long.\u003c\/strong\u003e Published for this model — useful for getting it into position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe TL’s frame and motor.\u003c\/strong\u003e Same 1 hp drive and 72.8\" height as the flagship, without the cutting-roller option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive voltage builds.\u003c\/strong\u003e 220 V three phase standard, with 115\/60\/1, 220\/60\/1, 400\/60\/1 and 400\/60\/3 available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterlocked guard and emergency stop.\u003c\/strong\u003e The documented safety set for the 600 series.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eControls\u003c\/h3\u003e\u003cp\u003eMain power switch, emergency stop switch, a direction control lever and a foot pedal for forward and reverse table travel.\u003c\/p\u003e\u003cp\u003eThickness is set by hand, at the cylinders.\u003c\/p\u003e\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cp\u003eWholesale bakeries, high-volume pizza operations, croissant and laminated pastry production, commissaries supplying several sites, and any kitchen sheeting stiff or cold dough through the full width of the belt.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSFG600TMM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReversible dough sheeter, floor model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBelt width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e23.75\" (60.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDough thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0\" to 1.9\" (0–4.8 cm), manually adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCylinders\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHard chrome polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.00 hp (0.75 kW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChain drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElectrical – standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220 V, 3 phase, 60 Hz, 4.48–9.11 A, NEMA L-15-20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElectrical – optional\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e115\/60\/1 · 220\/60\/1 · 400\/60\/1 · 400\/60\/3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e72.8\" (185 cm) H × 35.4\" (90 cm) W × 56\" (142 cm) D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength folded\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e63\" (160 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBase length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e29.625\" (75.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTables\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24\" × 63\", two\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e573 lbs. (260 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e683 lbs. (310 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting rollers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot offered on this model — SFG600TL only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInterlock switches on the guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne year, on-site parts and labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical Supply\u003c\/h3\u003e\u003cp\u003eAs standard this machine is wired 220 V three phase, 4.48–9.11 A, on a NEMA L-15-20 connection, and Univex will build it for 115\/60\/1, 220\/60\/1, 400\/60\/1 or 400\/60\/3 instead. The amp draw is the higher of the two figures in the 600 series, which follows from the larger motor. As elsewhere in the range, Univex’s product page shows 208-240\/60\/3 against the sheet’s 220 V, and the sheet is what we have published.\u003c\/p\u003e\u003ch3\u003eCutting rollers: TL only\u003c\/h3\u003e\u003cp\u003eUnivex restricts cutting roller attachments to the SFG600TL and states it in capitals on the sheet this machine shares. The TMM cannot be fitted with them, now or later. Since this model matches the TL on motor and frame, that restriction is often the deciding difference between the two — so if strip cutting is on the requirement list, it points at the TL and not at a cheaper machine with an attachment added.\u003c\/p\u003e\u003ch3\u003eStorage and handling\u003c\/h3\u003e\u003cp\u003eUnivex’s 600-series sheet says in one place that the tables fold for storage and movement and in another that sheeters cannot be stored in the folded position, because of the length of the tables and for safety reasons. Both sentences are Univex’s. We follow the restriction: fold the tables to move the machine, then put them down, and plan the floor to the tables-down depth of 56\".\u003c\/p\u003e\u003ch3\u003eAccessories\u003c\/h3\u003e\u003cp\u003eUnivex leaves the standard and optional accessory fields on this sheet blank, so there is no published crate list and we are not supplying one from imagination. The sole named factory option for the sheeter range is a prison package.\u003c\/p\u003e\u003ch3\u003eCertification\u003c\/h3\u003e\u003cp\u003eNo NSF, UL, cETLus, ETL or CSA mark is published by Univex for this machine or for any sheeter it builds. We carry no badge on this page because the manufacturer issues none.\u003c\/p\u003e\u003ch3\u003eFactory Options and Accessories (Additional Cost)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrison package, factory installed\u003c\/li\u003e\n\u003cli\u003eOptional 115\/60\/1, 220\/60\/1, 400\/60\/1 and 400\/60\/3 configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eOne year, on-site parts and labor.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications per Univex data; subject to change by the manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Univex","offers":[{"title":"Default Title","offer_id":51724375294248,"sku":"SFG600TMM","price":14986.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/5151\/1092\/files\/071-sfg600tmm.jpg?v=1776542210","url":"https:\/\/www.nishienterprise.com\/products\/univex-sfg600tmm-reversible-dough-sheeter-floor-model","provider":"Nishi Enterprise Inc","version":"1.0","type":"link"}