{"product_id":"univex-sfg600tm-reversible-dough-sheeter-floor-model","title":"Univex SFG600TM Reversible Dough Sheeter, Floor Model, 23.75\" Belt, 3\/4 HP","description":"\u003cp\u003eThe Univex SFG600TM is the entry point to the wide-belt 600 series: a 23.75\" belt — four inches wider than anything in the 500 line — on 47\" tables, driven by a 3\/4 hp chain drive. It weighs 512 lbs. and stands 61.4\" tall on a 36.6\" × 55.9\" footprint.\u003c\/p\u003e\u003ch3\u003eThe wide belt on the smaller motor\u003c\/h3\u003e\u003cp\u003eThis model is the one place in the Univex range where belt width and motor size come apart. The SFG600TM carries the full 23.75\" working width of the 600 series but keeps the 3\/4 hp motor of the 500 series — the TMM and the TL above it both step up to 1 hp. That is a deliberate price point, and whether it suits you depends on what you sheet.\u003c\/p\u003e\u003cp\u003eWidth is about how much dough crosses the cylinders per pass; power is about how stiff that dough can be. A wide belt on a 3\/4 hp drive handles large, well-hydrated sheets comfortably and will work harder on cold, tight, low-hydration dough than the 1 hp machines will. If your production is laminated pastry and pizza at normal hydration, this is the sensible buy; if it is stiff bread dough straight out of the retarder, look at the TMM.\u003c\/p\u003e\u003ch3\u003e47\" tables, and the extra width that comes with them\u003c\/h3\u003e\u003cp\u003eThe tables are 24\" × 47\" against the SFG500TM’s 20\" × 47\" — same length, four inches more across, matching the wider belt. In practice that means a sheet at full belt width is fully supported rather than overhanging the table edges, which is what keeps the edges of a wide sheet from stretching thin as it comes through.\u003c\/p\u003e\u003cp\u003eFour voltage builds are available, including the 115 V single-phase option that the 500 series does not offer — useful on a site that cannot supply three phase to the machine’s position.\u003c\/p\u003e\u003ch3\u003eWhy Operators Choose It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull 23.75\" belt.\u003c\/strong\u003e The 600 series working width, four inches wider than any 500-series machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4 hp chain drive.\u003c\/strong\u003e The 600 series at its lowest power rating; the TMM and TL use 1 hp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24\" × 47\" tables.\u003c\/strong\u003e Wide enough to support a full-width sheet along its whole length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe widest voltage choice in the range.\u003c\/strong\u003e 220 V three phase standard, plus 115\/60\/1, 220\/60\/1, 400\/60\/1 and 400\/60\/3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduction to 1.9\", by hand.\u003c\/strong\u003e Cylinder separation set manually, table reversed on a foot pedal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuard interlocks.\u003c\/strong\u003e The drive stops if the safety guard is opened.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eControls\u003c\/h3\u003e\u003cp\u003eMain power switch, emergency stop switch, a direction control lever and a foot pedal for forward and reverse table travel.\u003c\/p\u003e\u003cp\u003eCylinder separation — and therefore dough thickness — is set by hand.\u003c\/p\u003e\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cp\u003ePizzerias working wide skins, bakeries laminating in volume, pastry kitchens, tortilla and flatbread production, and operations that want the 600 series belt without paying for the larger machines above it.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSFG600TM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReversible dough sheeter, floor model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBelt width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e23.75\" (60.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDough thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0\" to 1.9\" (0–4.8 cm), manually adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCylinders\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHard chrome polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.75 hp (0.55 kW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChain drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElectrical – standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220 V, 3 phase, 60 Hz, 2.60–7.35 A, NEMA L-15-20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElectrical – optional\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e115\/60\/1 · 220\/60\/1 · 400\/60\/1 · 400\/60\/3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e61.4\" (156 cm) H × 36.6\" (93 cm) W × 55.9\" (142 cm) D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBase length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e29.625\" (75.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTables\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24\" × 47\", two\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e512 lbs. (232 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e622 lbs. (282 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting rollers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot offered on this model — SFG600TL only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInterlock switches on the guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne year, on-site parts and labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical Supply\u003c\/h3\u003e\u003cp\u003eStandard is 220 V three phase, 2.60–7.35 A, NEMA L-15-20. Univex also builds this model for 115\/60\/1, 220\/60\/1, 400\/60\/1 and 400\/60\/3 — the fullest option list of any sheeter it makes. Be aware that Univex’s product page prints 208-240\/60\/3 where the sheet prints 220 V standard; the sheet figure is the one above. The machine is wired for a single configuration at the factory, so confirm the supply first.\u003c\/p\u003e\u003ch3\u003eCutting rollers: not on this model\u003c\/h3\u003e\u003cp\u003eWorth stating plainly, because it is a common mix-up inside the 600 series. Univex offers cutting roller attachments for the SFG600TL alone, and prints the restriction in capitals on the shared specification sheet. Neither this machine nor the TMM can take them. If cut strips rather than plain sheets are the reason for the purchase, the TL is the single model in the family that will do it.\u003c\/p\u003e\u003ch3\u003eStorage and handling\u003c\/h3\u003e\u003cp\u003eThe tables fold upright, and Univex’s own sheet is contradictory about what that permits: it describes folding for storage and movement in one line and then states that, because of the length of the tables and for safety reasons, 600-series sheeters cannot be stored folded. We have published the restriction rather than the convenience, which is the safer of the two to be wrong about — so plan the floor space for this machine with its tables down, at 55.9\" deep.\u003c\/p\u003e\u003ch3\u003eAccessories\u003c\/h3\u003e\u003cp\u003eThe accessory fields on the 600-series sheet are printed empty, so no crate list is published for this model and none is invented here. A prison package is the sole factory option Univex names.\u003c\/p\u003e\u003ch3\u003eCertification\u003c\/h3\u003e\u003cp\u003eUnivex publishes no NSF, UL, cETLus, ETL or CSA mark for any sheeter in this range. The single regulatory reference anywhere in the operator manual is a US Department of Labor fact sheet about operators under eighteen, which is a labour rule rather than an equipment listing.\u003c\/p\u003e\u003ch3\u003eFactory Options and Accessories (Additional Cost)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrison package, factory installed\u003c\/li\u003e\n\u003cli\u003eOptional 115\/60\/1, 220\/60\/1, 400\/60\/1 and 400\/60\/3 configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eOne year, on-site parts and labor.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications per Univex data; subject to change by the manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Univex","offers":[{"title":"Default Title","offer_id":51724375195944,"sku":"SFG600TM","price":14822.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/5151\/1092\/files\/071-sfg600tm.jpg?v=1776542210","url":"https:\/\/www.nishienterprise.com\/products\/univex-sfg600tm-reversible-dough-sheeter-floor-model","provider":"Nishi Enterprise Inc","version":"1.0","type":"link"}