{"product_id":"univex-pm91g-power-drive-unit-extended-legs-1-hp","title":"Univex PM91G Power Drive Unit, Extended Legs, 1 HP, 115V","description":"\u003cp\u003eThe Univex PM91G is the PM91 power drive unit raised on extended legs. Everything in the drive train is the same — 1 hp capacitor-start motor, 7:1 poly-V belt, 250 rpm at a #12 hub — and the legs exist for one purpose: clearance under the discharge for a container bigger than the one the standard machine takes.\u003c\/p\u003e\u003ch3\u003eWhat the extended legs change\u003c\/h3\u003e\u003cp\u003eUnivex’s own description of the difference is a single sentence: the PM91G has all the features of the PM91 but adds extended legs to allow the use of a larger prep container. That is the whole of the published difference. Univex does not state the leg height, and does not state what size container the extra clearance permits.\u003c\/p\u003e\u003cp\u003eBoth machines share one specification sheet, one electrical table and one set of dimensions and weights, which means the 24\" height and the 82 lb. weight printed there cannot be attributed to the taller model with confidence. If the clearance under the outlet is the deciding factor for your bench, ask us and we will get the leg dimension from Univex in writing before you order rather than guess at it here.\u003c\/p\u003e\u003ch3\u003eWhy the clearance matters\u003c\/h3\u003e\u003cp\u003eA drive unit that feeds into a container smaller than the batch is a drive unit the operator has to stop. On a long shred of cabbage or cheese, the difference between emptying a container twice and emptying it five times is the difference between one job and an interrupted one — which is the case for buying the taller base even though the motor underneath is identical.\u003c\/p\u003e\u003ch3\u003eWhy Operators Choose It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe same drive, lifted.\u003c\/strong\u003e Identical 1 hp motor, 7:1 belt reduction and #12 hub; the legs are the whole of the published difference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom for a bigger container.\u003c\/strong\u003e Univex’s stated reason for the model: clearance for a larger prep container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes the same three heads.\u003c\/strong\u003e VS9 slicer, VS9H shredder and ALMFC12 grinder, all on the #12 hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyed off between shifts.\u003c\/strong\u003e Removable operator key and a hand-resettable overload breaker, as on the standard base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in the USA.\u003c\/strong\u003e Printed on the shared PM91 \/ PM91G specification sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eControls\u003c\/h3\u003e\u003cp\u003eOne motor speed, a removable operator key and a manually resettable overload breaker — the same control set as the standard-height machine.\u003c\/p\u003e\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cp\u003eProduction kitchens shredding or slicing in long runs, commissaries, central prep rooms, and any site that already knows it will outgrow the container a bench-height drive can sit over.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePM91G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePower drive unit, extended legs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 hp capacitor start, 1,740 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePoly-V belt, 7:1 reduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAttachment speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAttachment hub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e#12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e115 V, 1 phase, 60 Hz, 11.5 A, NEMA 5-15P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLeg height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot published by Univex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions and weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnivex prints one shared figure set for the PM91 and PM91G and does not separate them — ask us before planning to a height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder-coated 10-gauge steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemovable operator key, manually resettable overload breaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne year, on-site parts and labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of manufacture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSafety and restart behaviour\u003c\/h3\u003e\u003cp\u003eTwo things protect the machine and the operator: a removable operator key, so the drive cannot be started by anyone who does not have it, and a manually resettable overload breaker. Note what Univex does \u003cstrong\u003enot\u003c\/strong\u003e claim — there is no no-volt release. The operator manual states that the unit restarts when power is restored, so the switch must be turned off before the key is pulled or a cutting attachment is changed.\u003c\/p\u003e\u003ch3\u003eCertification\u003c\/h3\u003e\u003cp\u003eUnivex publishes no NSF, UL, cETLus, ETL or CSA mark for this model. We list what the manufacturer documents and nothing more.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower drive unit on extended legs, with #12 attachment hub\u003c\/li\u003e\n\u003cli\u003ePrep container and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFactory Options and Accessories (Additional Cost)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVS9\u003c\/strong\u003e vegetable slicer with adjustable knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVS9H\u003c\/strong\u003e vegetable shredder with plate holder and 3\/16\" plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eALMFC12\u003c\/strong\u003e meat and food grinder for the #12 hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000450\u003c\/strong\u003e plastic cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eOne year, on-site parts and labor.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications per Univex data; subject to change by the manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Univex","offers":[{"title":"Default Title","offer_id":51724374769960,"sku":"PM91G 1151","price":2134.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/5151\/1092\/files\/071-pm91g.jpg?v=1776542179","url":"https:\/\/www.nishienterprise.com\/products\/univex-pm91g-power-drive-unit-extended-legs-1-hp","provider":"Nishi Enterprise Inc","version":"1.0","type":"link"}